Used Food Processing Fillers

Fillers are used to rapidly and precisely fill containers with food products to the correct amount, volume, or weight requirement. These fillers also allow improved and more consistent sealing of food containers with both filling and capping being performed quicker.

Different food products require specific fillers. These fillers include, but are not limited to, granular fillers, brewer type fillers, pump-type fillers, or rotary piston fillers. Food processing fillers are used in many types of food processing facilities for meats, poultry, vegetables, fruits, snack foods, peas, beverages, bottling and other applications.

Regal Equipment offers used and reconditioned food processing fillers from manufacturers including Solbern, Phaudler, Elmar, Zacmi and FMC. To learn more about a specific food processing filler, click on the product name below. 

All Fillers - 28 Items

Engi-O Bag In A Box Filler with Roller Conveyor

Model #: FA-XYO-MMM-FT
Item No: 18589-M

The Engi-O Aseptic Combination A5 Filler provides a range of configurations to suit a variety of filling requirements.

The Engi-O aseptic filling equipment has recently passed an independent process authority Food and Drug Administration (FDA) validation in a new installation in North America. 

The total filling time is dependent on the product and supply. As a rule of thumb, there is up to 12 seconds of non-filling time per cycle. The flow rate can be as much as 2 litres per second. So a 200 litre bag would be filled in 112 seconds.

The new generation of Bulk filler has improved movement capabilities with a regular movement with respect to the volume filled.

Convert the filler from an ergonomically friendly front entry small bag filler by adding the lifting mechanism or with a little more effort and adding the in and out motion to an Intermediate Bulk Container (IBC) Filling Machine.

Features:

  • 2-1600L bags
  • 316 Stainless Steel components
  • 1x1.5" Magnetic Flow Meter, +/-.5% accuracy
  • Handheld screen for machine control flexibility
  • Autofill and eject routine
  • Gemu angle seat valves
  • Two hand safety start
  • Optional conveying accessory with remote control
  • Bioflex product hose (US 3A standards)
  • Height adjustable
  • Head retractable and extendable
  • Load cells option for fill by weight

Below is an indication of the filling time. This is for a bag with a 32 mm gland and the product being supplied by an aseptic tank pressurized at 1 bar with a flow rate of 3 l/s and a non fill time of 15 s.

Bag size (L)    Fill Time (s)    BPM    BPH
20 

22

 

2.7

 

162

200 

82

 

0.7

 

42

1000 

348

 

0.2

 

12

1600 

548

 

0.1

 

6

 

The flow rate may vary according to the viscosity of the product and the temperature at which it needs to be filled.BPM = Bags per minute.BPH = Bags per hour.

Engi-0 Aseptic Front-Entry Filler with Autofeed

Model #: FA-010-MMM-FT
Item No: 18586-M

With the ability to fill small bags aseptically, this A3 Model filler is compact and can be installed as a standalone. It can also be installed with a bulk filler to increase production.

The Engi-O aseptic filling equipment has recently passed an independent process authority Food and Drug Administration (FDA) validation in a new installation in North America.

Features:

  • 2-20L bags
  • 316 Stainless Steel components
  • 1x1.5" Magnetic Flow Meter, +/-.5% accuracy
  • Optional handheld screen for machine control flexibility
  • Autofill and eject routine
  • Gemu angle seat valves
  • Two hand safety start
  • Compact unit
  • Load cells available for fill by weight

 

Below is an indication of the filling time. This is for a bag with a 32 mm gland and the product being supplied by an aseptic tank pressurized at 1 bar with a flow rate of 3 l/s and a non fill time of 15 s.

Bag size (L)    Fill Time (s)    BPM    BPH
2 

15

 

4

 

240

10 

18

 

3.3

 

198

20 

22

 

2.7

 

162

 

The flow rate may vary according to the viscosity of the product and the temperature at which it needs to be filled.BPM = Bags per minute.BPH = Bags per hour.

The unit is attached to the head in the small bag configuration and delivers more flexibility to the user

Engi-O Bag In A Box Filler with Roller Conveyor

Model #: FA-XYO-AB-MMM-FT
Item No: 18583-M

The Engi-O Aseptic Combination A5 Filler provides a range of configurations to suit a variety of filling requirements.

The Engi-O aseptic filling equipment has recently passed an independent process authority Food and Drug Administration (FDA) validation in a new installation in North America. 

The total filling time is dependent on the product and supply. As a rule of thumb, there is up to 12 seconds of non-filling time per cycle. The flow rate can be as much as 2 litres per second. So a 200 litre bag would be filled in 112 seconds.

The new generation of Bulk filler has improved movement capabilities with a regular movement with respect to the volume filled.

Convert the filler from an ergonomically friendly front entry small bag filler by adding the lifting mechanism or with a little more effort and adding the in and out motion to an Intermediate Bulk Container (IBC) Filling Machine.

Features:

  • 2-1600L bags
  • 316 Stainless Steel components
  • 1x1.5" Magnetic Flow Meter, +/-.5% accuracy
  • Handheld screen for machine control flexibility
  • Autofill and eject routine
  • Gemu angle seat valves
  • Two hand safety start
  • Optional conveying accessory with remote control
  • Bioflex product hose (US 3A standards)
  • Height adjustable
  • Head retractable and extendable
  • Load cells option for fill by weight

Below is an indication of the filling time. This is for a bag with a 32 mm gland and the product being supplied by an aseptic tank pressurized at 1 bar with a flow rate of 3 l/s and a non fill time of 15 s.

Bag size (L)    Fill Time (s)    BPM    BPH
20 

22

 

2.7

 

162

200 

82

 

0.7

 

42

1000 

348

 

0.2

 

12

1600 

548

 

0.1

 

6

 

The flow rate may vary according to the viscosity of the product and the temperature at which it needs to be filled.BPM = Bags per minute.BPH = Bags per hour.

Ohlson Two Lane Linear Scale Filler

Model #: 2L2SS
Item No: 18514-FIL

Two-lane linear scale, bulk and dribble vibratory filler / feeder, for filling and feeding dry, granular and free flowing particulate food products / ingredients by weight

The machine is configured with - Two lanes with two scales, manufacturer rated for 22 lb capacity per scale. Manufacturer rated for up to 30 weighs per minute, with timing adjustable to allow for double-stroke fills up to 44 lbs, and approximately 7 ounce minimum weigh capability per scale. Bulk system infeed hopper 8"Wide by 38" Long with inverted "V" center anti-bridging diverter, over vibrating flat trough 12"Deep by 15"Wide by 48"Long.

Scale feed section hopper 17.5"Wide X 17.5"Long at a  77"Infeed height, with a center "V" divider separating the product flow to two, two-lane, flat bottomed bulk and dribble feed pans, each with two 5.5"Deep X 5.5"Wide X 22"Long lanes with shutoff flaps for each lane at the discharge (two pans with four lanes each with flap).

Dual weigh scale buckets each 9"Long X 12"Wide and tapering from 7" to 9"Deep, drop into individual chutes that drop into individual discharge spouts tapering to 3.5"Wide. Each weigh bucket has it's own individual weigh cell.

        •       Discharges could be combined into a single discharge outlet.

        •       Manufacturer rated for scale accuracy (+/-) .5-1 gram.

        •       6 inch touch screen operator control interface, with multiple preset programs with PLC.

        •       110 volt single phase (standard household current) 7 amp electrical input.

        •       Pneumatically actuated lane flaps and weigh-bucket doors require compressed air 1 cfm @ 60psi.

        •       110 inch infeed height to bulk feed hopper, 19.5 inch discharge height from discharge spouts.

        •       All food grade stainless steel product contacts and support frame.

FMC 21 Pocket Granular Filler

Item No: 18496-M

  • 3 1/2"W X 2"Deep pockets  

FMC Piston Filler

Model #: 20
Item No: 18367-M

  • Stainless steel contact

  • 8 oz. fill

FMC Piston Filler

Model #: C210
Item No: 18355-M

  • Model # C-210

  • Stainless steel contact 

  • 11 oz. fill

Hema Stainless Steel Piston Filler

Model #: EC16
Item No: 18352-M

  • Set for 40 oz

  • MFG: 1983

  • Straight line infeed

  • Stainless steel contact

Solbern High Speed Brinner

Model #: LBS
Item No: 18334-M

  • Overflow brinner/ sauce filler 

  • Stainless steel construction 

  • Can size 300 x 407 adjustable guides

  • Stainless steel tri-clover pump and fittings 

Zacmi Volumetric/Granular Pocket Filler

Model #: 48 Pocket
Item No: 18325-M

  • Can size 300 x 407 

  • Pocket size 2.5" diameter

  • Mechanical height adjustment 

Elmar Piston Filler

Model #: RPE-554LILH
Item No: 18310-M

  • 54 station piston filler

  • Manufactured 2002

  • Can size 300 x 407

  • Stainless steel contact and base

  • Piston is 7.5" long, 2.75" diameter, 1" port

Auto-Prod Cup Filler

Model #: FP2X8
Item No: 17860-MSC

  • 8-Lane Stainless steel products filler

  • With double indexer, cup feeder, lid denester, tamper evident 

  • Sealer with Allen Bradley Logix 5561 PLC controls

  • Kinetics 6000 Servo drives, Powerflex 40 VFD's #4

  • operated up to 390 CPM- 4oz., 4.5oz., 6oz., Plate diameter 75mm  

Zacmi 36 Pocket Filler

Model #: 36 Pocket
Item No: 17839-FIL

  • Set: 401/404 can Diameter

  • Cup Diameter is 3.36"

  • Rotation is counter clockwise 

  • Infeed/discharge 12" stainless steel 

  • Flat top stainless steel conveyor belt

  • Equipped with power brush, adjustable diversion gates, and level controls

  • All stainless steel construction

  •  No controls

Inline Volumetric Six Head Piston Filler

Item No: 17782-FIL

  • Inline Volumetric Six Head Piston Filler

  • Containers: 8 oz, 16 oz, 32 oz (70 mm neck opening)

  • S/N: 37179

  • New in 2017 - Never Used

  • Sanitary Design

  • 3-Way Filling Valve

  • Estimated Rate of Production: 45-55 containers per minute @ 16 oz

FMC 12 Pocket Granular Fillers

Model #: 12-G
Item No: 16675-FIL

  • FMC 12 Pocket Granular Filler
  • Model: 12-G
  • Serial: N/A
  • Set: 603 x 700
  • Stainless Steel Contact
  • Mild Steel Painted Base
Zacmi 48-Pocket Filler

Model #: 233
Item No: 16501-FIL

  • ZACMI 48 Pocket Granular Filler
  • Model: 0233
  • Serial: 0233-48-T-96
  • Set @ 300 X 407
  • Stainless Steel Construction

Fox Leader Fillers

Item No: 16489-FIL

  • Set @ 300 x 407 - adjustable
  • Stainless Steel Construction
Zacmi 50 Pocket Filler 0275-50

Model #: 0275-50
Item No: 15382-FIL

  • Zacmi 50 Pocket Green Bean Filler
  • Model: 0275-50
  • Serial: 108802
  • Set: 300 x 407
  • Year: 2010
  • Drawing # 800003696

Elmar 28-Valve Piston Filler RP628

Model #: RP628
Item No: 14953-FIL

    • Stainless steel construction
    • Set for 250 ml rectangle shape container
    • Fill range: 8.5 fl oz min. 20 fl oz max.

 

Elmar 35 Piston Filler RP-35

Model #: RP-35
Item No: 14926-FIL

    • 1-3/4" diameter piston with approximate 9" stroke
    • Set on 211 diameter cans
    • Timing screw infeed and infeed star
    • Pneumatically operated no-call no-fill
    • Waukesha straight sided valves with 5/8" X 1" ports
    • Stainless steel base

 

Federal Rotary 18 Valve Net Weight Filler F18 Series 720

Model #: F18 Series 720
Item No: 14419-FIL

    • 18 Valve Federal Weight Filler with:
    • Model F18 Series 720
    • 4.9 inch centers
    • 7 kg weigh cells
    • Speeds up to 90bpm
    • Last ran 8oz, 12oz, & 16oz plastic bottles
    • Stainless Steel Construction

 

Custom Design & Fabricated Overflow Briner

Item No: 13693-BBB

    • Custom Design & Fabricated Overflow Briner
    • 72" L Overflow
    • Stainless Steel Construction
    • Stainless Steel Contact Parts

 

FMC Granular Filler 21-G

Model #: 21-G
Item No: 13627-FIL

    • 3 HP, 230/460V, 1750 RPM, 3 PH, 60 Hz 8.2/4.1 amp Baldor motor
    • 1/3 HP, 230/460V, 1725 RPM, 3 PH, 60 Hz, 1/.5 amp duty master motor

 

Diamond Stainless Steel Pork Depositor D-105-RD

Model #: D-105-RD
Item No: 12544-MSC

    • Set to 603 can diameter
    • Equipped with Eurodrives on cutter and can feed
    • Central lube system

 

Custom Overflow Briner

Item No: 12415-MSC

    • Set: 211 Diameter Can
    • Overall Length: 16'
    • Stainless Steel Construction

 

Custom Designed & Fabricated Inline Briner

Item No: 12304-MSC

    • Stainless Steel Inline Briner
    • Set: 211 dia.
    • Overall Length: 21'
    • Briner Tank Length: 118"
    • Variable Speed Timing Screw In-feed
    • Stainless Steel Construction
    • No Tag
    • No Can Chain

 

A. K. Robins Inline Briner

Item No: 12301-MSC

    • Set to 401 diameter
    • Overall Length: 13'
    • Timing screw in-feed
    • Constructed with stainless steel

 

Biner-Ellison 12-Valve Gallon Filler

Item No: 01453-FIL

    • 1 gallon capacity plastic containers
    • 12 valve @ 5/8" Filabelmatic
    • Top drive, 1 HP tri-clover feed pump
    • Stainless steel contacts

 


Markets Served
Weekly Inventory Updates
Subscribe to our Newsletter
Latest Blog Post