Used Fruit Processing and Packaging Equipment

Fruit processing entails different equipment for various applications including fruit cleaning, sorting, dicing, pureeing, and packaging. Used for fresh-pack, frozen, and prepared food markets, fruit processing machines vary according to the type of fruit they process. Most of these machines can easily be cleaned up since they are versatile for different fruits undergoing the same applications.These units are known for their reputation to meet food industry standards as well as consider important factors like high product quality.

Regal Equipment offers a range of used and reconditioned fruit processing and packaging equipment that caters to fruit processing and packaging companies’ needs. To learn more about a specific unit, click on the product name below.

Used Fruit Processing and Packaging Equipment

Mepaco ThermaBlend 170

Model #: ThermoBlend170

  • 4,000 lb. capacity

  • Dual shaft ribbon agitation

  • Dual end discharge

  • Hopper is 90"L X 60"W X 40"Deep

  •  Jacketed 100PSI @ 350F

  • MFG: 2002

  • R stamp tag 1367 2009

HUGHES Fresh Corn Cutter

Model #: 037-5135
Item No: 18712-CTR

Hughes fresh market corn cutter removes the corn kernels from husked corn for commercial use as fresh or frozen product.  This is a hand feed cutter capable of handling 100 ears of husked sweet corn per hour depending on operator capabilities.  The husked cobs cobs are placed on a conveyor the kernels are removed by 6 rotating blades that precisely cut the kernels from the cob.  The kernels fall through an opening in the bottom of the cutting chamber and the cobs are ejected out the side into a tote.  

  • Capacity approximately 100 husked ears per minute depending on operator

  • Dimensions 62" long X 44" wide X 55" Heigh

  • Utility Requirements 230 Volt Single Phase, 1-2 gal. water per minute

  • Stainless steel construction except for cutting head and drive assembly 

  • E- Stop Equipped

  • Simple operator controls 

  • On casters 

HUGHES Fresh Mini Husker

Model #: 032-8305
Item No: 18709-MSC

Fresh Market Corn Husker designed to efficiently remove the husk from fresh sweet corn with shanks removed.  Capable of husking 20-30 ears per minute dependent on operator feed rate. Specifically suited for the smaller operator processing fresh market produce or frozen.  The machine requires only one operator to feed and control the equipment.  The husker is capable of also removing stems and debris from fruit, vines such as citrus fruits and apples.  They have also been used to remove stems and debris from beets, carrots, onions, potatoes, and radishes.

  • Capacity 20-30 ears per minute

  • Dimensions 32" wide X 102" long X 57" Heigh

  • Utility Requirements: 230 volt single phase, 1-2 gal. water per minute, 15 Cfm @90 Psi compressed air

  • Safety switches for operator protection, Lexan top cover allows operator view of process 

  • Stainless steel construction of all components except roller shafts and dive assemblies

  • Adjustable hand cranks allow for height adjustment

  • wEquipped with lockable swivel casters 

Custom Designed and Fabricated Hopper Auger Conveyor

Item No: 18694-M

  • Stainless steel construction

  • 8" Screw

Safeline Metal Detector with Incline Conveyor

Item No: 18688-M

  • Aperture 24"W X 6"T

  • Incline conveyor blue rubber belt

  • 23"W X 14'L

Stephan Microcut MCH

Model #: MCH20K
Item No: 18682-M

  • The STEPHAN Microcut Machines are compact and easy to use. The unique Microcut principle allows fine cutting and emulsifying processes in one machine.

  •  They handle almost all the tasks involved in the production of meat emulsions for sausage production, fine pate, puree and similar fine and smooth products in the meat and convenience industry.

  • Vol 440 60HZ

  • MFG: 2012 

Urschel Comitrol 2100

Model #: 2100
Item No: 18661-M

  • With stainless steel hopper and stand

  • 3Hp upper hopper agitator

  • 7.5 lower feed screw

  • 40HP 50/60 Hrtz

  • Stainless steel construction

adapt.a.ramp Mobile Truck Ramp

Model #: M35000
Item No: 18646-M

  • Load capacity: 35,000LBS  

  • Mild steel painted construction

adapt.a.ramp Mobile Truck Ramp

Model #: M35000
Item No: 18643-M

  • Load capacity: 35,000LBS

  • With hitch attachment  

  • Mild steel painted construction

Washex Pressure Washer

Model #: JP-2503-OME3
Item No: 18640-M

  • Mi-T-M 2500PSI

  • Max GPM: 3.2

  • 6HP, 3 phase, 230 volt, 60Hz, 15 amps

  • 125F tempature

ShuttleBin 330

Model #: 330
Item No: 18634-M

  • Outer Dimensions 48"L X 40"Wide X 32"Tall

  • Interior dimensions 44"L X 36"W X 26"Tall

  • Collapsible height 11 1/2"

  • Nestable 

Strapping Tool Cart

Item No: 18631-M

  • Strapping cart with plastic banding material

  • Battery powered ZAPAK banding tool with (2) Bosh batteries and charger

Pallet Jack

Model #: HJ 5500
Item No: 18628-M

  • Capacity: 5,500LBS  

Pallet Jack

Model #: HJ 5500
Item No: 18625-M

  • Capacity: 5,500LBS  

Cousins Packaging Pallet Wrapper

Model #: LPSW-A
Item No: 18622-M

  • The Switch Semi2auto

  • 115 Volts, 12 Amps, 1 Phase

Sort Table Round

Item No: 18619-M

  • 48"Diameter X 29"Tall  

  • Equipped with variable speed control

  • Stainless steel construction 

Reynolds Vegetable Peeling Machine

Model #: SS430G
Item No: 18616-M

  • Capacity: 30LBS.

  • 3/4 HP 115 volt 60 Hz, 1 phase, 13 amps

  • Contract number: DLA-400-82-C-1549

  • abrasive in good condition

  • stainless steel construction

Stainless Steel Live Bottom Hopper

Model #: S33467-03B
Item No: 18613-M

  • Takeaway conveyor is 12"W X 14'L X 55" Discharge height

  • Hopper 7'L X 40"W X 38"Deep

  • White plastic modular belt

Crown Electric Power Jack

Model #: WP3035-45
Item No: 18610-M

  • Capacity: 4,500LBS

  • Electric

Cardinal Skid Floor Scale

Model #: 190
Item No: 18607-M

  • Floor Level Pallet Scale 

  • Stainless Steel Construction

  • Digital Readout 

  • 5,000 lb. Cap.


Quadro Ytron ZC with Super Sack Unloader

Model #: Ytron ZC
Item No: 18592-M

  • High shear single-pass powder wetting and dispersing system

  • MFG: 2016

  • FormPak SN: 1758600097 Bulk Bag System

  • Mild Steel Super Sack System

  • Quadro Mill Stainless Steel Contact 

Engi-O Bag In A Box Filler with Roller Conveyor

Model #: FA-XYO-MMM-FT
Item No: 18589-M

The Engi-O Aseptic Combination A5 Filler provides a range of configurations to suit a variety of filling requirements.

The Engi-O aseptic filling equipment has recently passed an independent process authority Food and Drug Administration (FDA) validation in a new installation in North America. 

The total filling time is dependent on the product and supply. As a rule of thumb, there is up to 12 seconds of non-filling time per cycle. The flow rate can be as much as 2 litres per second. So a 200 litre bag would be filled in 112 seconds.

The new generation of Bulk filler has improved movement capabilities with a regular movement with respect to the volume filled.

Convert the filler from an ergonomically friendly front entry small bag filler by adding the lifting mechanism or with a little more effort and adding the in and out motion to an Intermediate Bulk Container (IBC) Filling Machine.

Features:

  • 2-1600L bags
  • 316 Stainless Steel components
  • 1x1.5" Magnetic Flow Meter, +/-.5% accuracy
  • Handheld screen for machine control flexibility
  • Autofill and eject routine
  • Gemu angle seat valves
  • Two hand safety start
  • Optional conveying accessory with remote control
  • Bioflex product hose (US 3A standards)
  • Height adjustable
  • Head retractable and extendable
  • Load cells option for fill by weight

Below is an indication of the filling time. This is for a bag with a 32 mm gland and the product being supplied by an aseptic tank pressurized at 1 bar with a flow rate of 3 l/s and a non fill time of 15 s.

Bag size (L)    Fill Time (s)    BPM    BPH
20 

22

 

2.7

 

162

200 

82

 

0.7

 

42

1000 

348

 

0.2

 

12

1600 

548

 

0.1

 

6

 

The flow rate may vary according to the viscosity of the product and the temperature at which it needs to be filled.BPM = Bags per minute.BPH = Bags per hour.

Engi-0 Aseptic Front-Entry Filler with Autofeed

Model #: FA-010-MMM-FT
Item No: 18586-M

With the ability to fill small bags aseptically, this A3 Model filler is compact and can be installed as a standalone. It can also be installed with a bulk filler to increase production.

The Engi-O aseptic filling equipment has recently passed an independent process authority Food and Drug Administration (FDA) validation in a new installation in North America.

Features:

  • 2-20L bags
  • 316 Stainless Steel components
  • 1x1.5" Magnetic Flow Meter, +/-.5% accuracy
  • Optional handheld screen for machine control flexibility
  • Autofill and eject routine
  • Gemu angle seat valves
  • Two hand safety start
  • Compact unit
  • Load cells available for fill by weight

 

Below is an indication of the filling time. This is for a bag with a 32 mm gland and the product being supplied by an aseptic tank pressurized at 1 bar with a flow rate of 3 l/s and a non fill time of 15 s.

Bag size (L)    Fill Time (s)    BPM    BPH
2 

15

 

4

 

240

10 

18

 

3.3

 

198

20 

22

 

2.7

 

162

 

The flow rate may vary according to the viscosity of the product and the temperature at which it needs to be filled.BPM = Bags per minute.BPH = Bags per hour.

The unit is attached to the head in the small bag configuration and delivers more flexibility to the user

Engi-O Bag In A Box Filler with Roller Conveyor

Model #: FA-XYO-AB-MMM-FT
Item No: 18583-M

The Engi-O Aseptic Combination A5 Filler provides a range of configurations to suit a variety of filling requirements.

The Engi-O aseptic filling equipment has recently passed an independent process authority Food and Drug Administration (FDA) validation in a new installation in North America. 

The total filling time is dependent on the product and supply. As a rule of thumb, there is up to 12 seconds of non-filling time per cycle. The flow rate can be as much as 2 litres per second. So a 200 litre bag would be filled in 112 seconds.

The new generation of Bulk filler has improved movement capabilities with a regular movement with respect to the volume filled.

Convert the filler from an ergonomically friendly front entry small bag filler by adding the lifting mechanism or with a little more effort and adding the in and out motion to an Intermediate Bulk Container (IBC) Filling Machine.

Features:

  • 2-1600L bags
  • 316 Stainless Steel components
  • 1x1.5" Magnetic Flow Meter, +/-.5% accuracy
  • Handheld screen for machine control flexibility
  • Autofill and eject routine
  • Gemu angle seat valves
  • Two hand safety start
  • Optional conveying accessory with remote control
  • Bioflex product hose (US 3A standards)
  • Height adjustable
  • Head retractable and extendable
  • Load cells option for fill by weight

Below is an indication of the filling time. This is for a bag with a 32 mm gland and the product being supplied by an aseptic tank pressurized at 1 bar with a flow rate of 3 l/s and a non fill time of 15 s.

Bag size (L)    Fill Time (s)    BPM    BPH
20 

22

 

2.7

 

162

200 

82

 

0.7

 

42

1000 

348

 

0.2

 

12

1600 

548

 

0.1

 

6

 

The flow rate may vary according to the viscosity of the product and the temperature at which it needs to be filled.BPM = Bags per minute.BPH = Bags per hour.

Waukesha SPX Positive Displacement Pump

Item No: 18577-M

  • Hopper with screw feed

  • Hopper 32"L X 30"W X 22"Deep

  • Duel feed 10" screws

  • Waukasha PD Pump 2" in 2" Out Stainless Steel Contact 

Stainless Steel Auger Conveyor with Eriez Magnet

Model #: PG 160815
Item No: 18574-M

  • 10" Auger X 10'L with a 46" discharge height

  • Stainless Steel Construction 

  • Extreme Rare Earth Plate Magnet Included

Brown Paddle Finisher Model 202

Model #: 202
Item No: 18571-M

  • Series No: 207

  • 600 Volt

  • Screen perforations are .060" (125769050RH)

  • 17lbs 0 Oz Paddles

  • Stainless Steel Construction

Urschel Comitrol 2100

Model #: 2100
Item No: 18568-M

  • impeller Moter 40 Hp

  • Feed screw 5 Hp

  • Agitator 2 Hp

  • Stainless Steel Construction 

CMP Tote Dumper

Item No: 18565-M

  • All stainless steel

  • MFG: May 2016

  • 600 Volt

Cintex Autosearch Metal Detector with Conveyor

Model #: IL
Item No: 18562-M

  • Metal detector aperture 4"H X 38"W

  • Conveyor is stainless steel construction

  • Conveyor 36"W X 6'L

  • 250 Volt, 30 amp, 2 pole 3 wire

3M Matic A20 Case Sealer

Model #: A20
Item No: 18559-M

  • Type: 10700

  • Part Number: S7710000000A

  • MFG: 2013

  • 120V, 2 amps, 1 phase, 60Hz

  • Top and bottom tape dispenser

Hitachi Ink Jet Printer

Model #: PB-260U
Item No: 18553-M

  • Nozzle size: 65um

  • Max. Number of lines: Up to 2 lines

  • Maximum number of characters per line: 1 Line up to 120 characters, 2 Lines up to 60 characters

  • Maximum print rate: Up to 821 characters (Font 5 x 7, space 1, 1 line)

  • On stainless steel stand 

Hitachi Ink Jet Printer

Model #: PB-260U
Item No: 18550-M

  • Nozzle size: 65um

  • Max. Number of lines: Up to 2 lines

  • Maximum number of characters per line: 1 Line up to 120 characters, 2 Lines up to 60 characters

  • Maximum print rate: Up to 821 characters (Font 5 x 7, space 1, 1 line)

  • On stainless steel cart

Custom Designed and Fabricated Produce Wash Tank with Takeaway Conveyor

Item No: 18547-M

  • Conveyor is liftable for cleaning

  • Unit is 116"L X 32"W X 36"Depth on tank

  • White Modular belt with 1/2" cleats

  • Stainless steel construction

Mueller Porta Tank 435 Gallon

Model #: 435 Gallon
Item No: 18544-M

  • Design pressure 35 PSI

  • Design Temp 100F

  • Test pressure 53 PSI

  • Volume .176 CU FT

  • Medium None/Glycol

  • Stainless steel construction

Mueller Porta Tank 435 Gallon

Model #: 435 Gallon
Item No: 18541-M

  • Design pressure 35 PSI

  • Design Temp 100F

  • Test pressure 53 PSI

  • Volume .176 CU FT

  • Medium None/Glyco

  • Stainless steel construction

CMP Dewatering Auger

Model #: PG 161108
Item No: 18538-M

  • Stainless steel construction

  • 10" Dewatering auger X 7'L

  • 115/230 Volt, 1HP motor

Odenberg Spray Washer 13

Model #: 13
Item No: 18532-M

  • Stainless steel construction

  • MFG: 2013

Odenberg Brusher, Peel Remover

Model #: Brusher
Item No: 18529-M

  • Dry peel eliminator

  • MFG: 2013

  • Wet or dry product

  • Depending on brush selection you can gently remove loose peel or aggressively remove minor defects

  • Stainless steel construction 

Odenberg / TOMRA Orbit 450 Steam Peeling Machine

Item No: 18526-M

Infeed Conveyor

  • Stainless Steel Construction

  • 18"W X 164"L X 160" Discharge height

  • Black solid rubber belt with 3" flights

  • Has a hopper for tote dumper loading

Steam Peeler

  • TOMRA Orbit 450

  • SN: 063P

  • MFG: 2013

Vessel

  • 350 PSI AT 437F

  • MAX ALLOW. 0F AT 350PSI

  • SN: 12352

  • MFG: 2-2013

  • NB: 1040

  • CRN: T4433.4

  • Vessel is mild steel

Discharge Auger

  • Stainless steel auger incline conveyor

  • 16" Auger X 11'L X 86" Discharge height

Accumulator

  • SN: 13047

  • MFG: 3-2013

  • NB: 1045

  • 350PSI AT 650F max allow. working pressure

  • -20F AT 350PSI min. design metal temp

Exhaust Tank

  • Odenberg Type ET

  • SN: 1556855

  • Part number M2962040

  • MFG: 2013

  • PS 0,5 bar

  • TS Max 140C

  • TS min -C

  • Pt 1 bar

  • V 3000 L

  • Group of fluid 2

  • Date of test 1/2013

Accumulator

  • NB# 1045

  • 350 PSI @ 650 F Max working pressure

  • S/N 13047 

  • MFG: 3-2013

Custom Metalcraft Tote Dumper

Model #: H-2
Item No: 18523-M

  • All stainless steel

  • MFG: 02-1990

  • 480 volt

Ohlson Two Lane Linear Scale Filler

Model #: 2L2SS
Item No: 18514-FIL

Two-lane linear scale, bulk and dribble vibratory filler / feeder, for filling and feeding dry, granular and free flowing particulate food products / ingredients by weight

The machine is configured with - Two lanes with two scales, manufacturer rated for 22 lb capacity per scale. Manufacturer rated for up to 30 weighs per minute, with timing adjustable to allow for double-stroke fills up to 44 lbs, and approximately 7 ounce minimum weigh capability per scale. Bulk system infeed hopper 8"Wide by 38" Long with inverted "V" center anti-bridging diverter, over vibrating flat trough 12"Deep by 15"Wide by 48"Long.

Scale feed section hopper 17.5"Wide X 17.5"Long at a  77"Infeed height, with a center "V" divider separating the product flow to two, two-lane, flat bottomed bulk and dribble feed pans, each with two 5.5"Deep X 5.5"Wide X 22"Long lanes with shutoff flaps for each lane at the discharge (two pans with four lanes each with flap).

Dual weigh scale buckets each 9"Long X 12"Wide and tapering from 7" to 9"Deep, drop into individual chutes that drop into individual discharge spouts tapering to 3.5"Wide. Each weigh bucket has it's own individual weigh cell.

        •       Discharges could be combined into a single discharge outlet.

        •       Manufacturer rated for scale accuracy (+/-) .5-1 gram.

        •       6 inch touch screen operator control interface, with multiple preset programs with PLC.

        •       110 volt single phase (standard household current) 7 amp electrical input.

        •       Pneumatically actuated lane flaps and weigh-bucket doors require compressed air 1 cfm @ 60psi.

        •       110 inch infeed height to bulk feed hopper, 19.5 inch discharge height from discharge spouts.

        •       All food grade stainless steel product contacts and support frame.

4 Station Inspection & Trim Conveyor

Item No: 18508-M

  • Stainless steel construction

  • White modular belt

  • 24"W X 189"L X 36" Discharge height

  • 2 E-stops

  • 4 Sorting stations

  • 208V

Stephan Microcut MCH

Model #: MCH20K
Item No: 18502-M

  • The STEPHAN Microcut Machines are compact and easy to use. The unique Microcut principle allows fine cutting and emulsifying processes in one machine.

  •  They handle almost all the tasks involved in the production of meat emulsions for sausage production, fine pate, puree and similar fine and smooth products in the meat and convenience industry.

  • 120 liter hopper

  • 1200 Kg/Hr. capacity (Depending on Product)

  • 3600 Rpm @ 60Hz

  • Motor 160-M-2A, 15 KW, 60 HZ, A 48,5, 

  • MASSCH. NR. 722.381.01

  • 220V, 230V 3 Phase 

FMC 21 Pocket Granular Filler

Item No: 18496-M

  • 3 1/2"W X 2"Deep pockets  

Wulftec Automatic Strech Wrapper

Model #: WCA-200
Item No: 18493-M

  • Inline top sheet applicator overhead gantry

  • Fully automatic

  • Pallet turntable 

  • Pallet handling conveyor 

Wolftec Automatic Strech Wrapper

Model #: WCA-200
Item No: 18490-M

  • Inline top sheet applicator overhead gantry

  • Fully automatic

  • Pallet turntable 

  • Pallet handling conveyor 

Taptone 500

Item No: 18484-M

  • Container inspection system

  • 2,000 containers/min capacity

  • Touch screen interface

  • Stainless steel housing 

Scantrac X-Ray Imaging System inspx

Item No: 18481-M

  • Metal container inspection system

  • Auto rejection

  • Touch screen operator interface

Mateer Burt Roll Through Labler

Model #: 408-D
Item No: 18478-M

  • Hydraulic label feed

  • Set can size: 300 X 407 3 piece can

  • Valco glue pot

ALVEY 910 Case Palletizer

Model #: 910
Item No: 18475-M

  • Alvey 910 Case Palletizer

  • Model # 910

  • Serial # 01-K664118

  • Project # KG32 

  • Year Of MFG : 2002

  • Allen Bradley 505 Processor

Alvey 880 Palletizer

Model #: 880
Item No: 18472-M

The Alvey 880 Series Palletizer offers a simple, heavy duty design for low maintenance and high reliability. It handles up to 45 cases per minute -- or up to 60 cases per minute with the optional layer accumulation table. A unique graphic touch screen operator interface, which provides set-up and diagnostic information, is conveniently located at platform level. The 880 is sized to accommodate a wide variety of products, tiersheets, slip sheets and pallets.

  • Project number: K664

  • MFG: 1995

  • Allen Bradley 505 Processor 

Scantrac X-Ray Imaging System inspx

Item No: 18469-M

  • Metal container imaging system 

  • Up to 2,000 containers/min

  • Auto rejection

  • Touch screen operator interface 

  • Stainless steel construction

Taptone 500

Model #: T500 CMS-P
Item No: 18466-M

  • Container inspection system 

  • 2000 containers/min capacity

  • Touch screen interface

  • Stainless Steel housing

Krones Canmatic

Model #: 073-P12
Item No: 18463-M

  • Wrap around pre-cut paper labelling machine

  • 5 oz 208 X 208 aluminum cans

  • MFG: 2001 

Metalcraft Column Dumper

Model #: 4F06058800
Item No: 18460-M

  • Stainless steel construction

  • Dump height 88"

  • Mast height 120"

  • MFG: 2011

Crepaco Single Shaft Ribbon Blender

Model #: FB
Item No: 18454-M

  • Single shaft ribbon agitation

  • Stainless steel construction

  • Jacketed

  • Hydraulically powered

  • Tub size: 4'W X 4'D X 6'L

Mepaco ThermaBlend 170

Model #: ThermaBlend 170
Item No: 18451-M

  • 2,500 lb. capacity

  • Dual ribbon agitation

  • Dual end discharge

  • Tub size: 5' W X 7' L X 32" D

  • All stainless steel construction

Mepaco ThermaBlend 170

Model #: ThermaBlend
Item No: 18448-M

  • 2,500 lb. capacity

  • Dual ribbon agitation

  • Dual end discharge

  • Tub size: 5'W X 7'L X 32"D

  • All stainless steel construction

RMF Incline Auger Conveyor

Item No: 18442-M

  • All stainless steel

  • 16"Diameter screw X 22'L X 11'Discharge height

Mepaco ThermaBlend 170

Model #: 170
Item No: 18436-M

  • 4,000 lb. capacity

  • Dual shaft agitation

  • Duel end discharge

  • Hopper is 90"L X 60"W X 40"Deep

  •  Jacketed 100PSI @ 350F

  • MFG: 2002

  • R stamp tag 1367 2009

Custom Designed and Fabricated Incline Auger Conveyor

Item No: 18433-M

  • 20" Auger

  • 16'L X 14'Discharge height

  • All stainless steel

Custom Designed and Fabricated Incline Auger Conveyor

Item No: 18430-M

  • 12" Auger

  • 13'L

  • Discharge height 84"

  • All stainless steel

Custom Designed and Fabricated Incline Auger Conveyor

Item No: 18424-M

  • 24'L X 24" Diameter Auger X 12' Discharge Height

  • Stainless steel construction

RMF Duel Auger Unloader

Model #: 14853
Item No: 18421-M

  • Duel 12" Augers

  • 15'L

  • Discharge height 42"

  • Stainless Steel Construction

Mettler Toledo Metal Detector

Item No: 18415-M

  • Safeline

  • Inline metal detector

  • Aperture is for a 4" pipe

Wolfking Hopper / Pump Feeder

Item No: 18412-M

  • Stainless steel conical feed hopper 

  • Waukasha SPX PD pump 4" in 4" out 

  • Stainless steel pump head 

Custom Designed and Manufactured Tote Dumper

Item No: 18406-M

  • All stainless steel

  • Dump height of 67"

A1 Column Dumper

Item No: 18403-M

  • V mag cart dumper 

  • 6' dump height 

  • 7' overall height 

  • Stainless steel construction

Rietz Dual Ribbon Blender

Model #: RS-28-K3410
Item No: 18397-M

  • All stainless steel   

  • MFG: 1978

  • Dual ribbon, end discharge

  • Inside blender dimensions 10'L X 60"W X 36"Deep

Rietz Dual Ribbon Blender

Model #: RS-28-K3410
Item No: 18394-M

  • All stainless steel   

  • MFG: 1978

  • Dual ribbon, dual end discharge

  • Inside blender dimensions 10'L X 60"W X 36" deep

Cozzini Stainless Steel Screw Loader with 650 Pump

Model #: CSLH 5000-2
Item No: 18391-M

  • MFG: 02/2016

  • Unibloc pump

Cozzini Stainless Steel Combo Tote Dumper

Model #: CVD6101
Item No: 18388-M

  • All Stainless Steel

  • Tote Size : 48" X 48"

  • Capacity : 3000 #

  • MFG: 2016

Vemag Cart 400lbs.

Item No: 18385-M

  • Stainless steel cart

  • 400 lbs.

  • Inside dimensions 25"W X 25"L X 29"Deep

Trinity Industries Kettle

Model #: SA
Item No: 18382-M

  • 300 gallon jacketed kettle

  • Jacket 125 psi @ 345F

  • MFG: 1991

  • National Board # 211

  • Stainless steel construction

Custom Designed and Fabricated Spiral Conveyor

Item No: 18376-M

  • 11' Tall

  • Set for 208 x 208

  • Stainless steel construction 

Custom Designed and Fabricated Spiral Conveyor

Item No: 18373-M

  • 11' Tall

  • Set for 208 x 208

  • Stainless steel construction

FMC Piston Filler

Model #: 20
Item No: 18367-M

  • Stainless steel contact

  • 8 oz. fill

FMC Piston Filler

Model #: C210
Item No: 18355-M

  • Model # C-210

  • Stainless steel contact 

  • 11 oz. fill

Hema Stainless Steel Piston Filler

Model #: EC16
Item No: 18352-M

  • Set for 40 oz

  • MFG: 1983

  • Straight line infeed

  • Stainless steel contact

Rietz Stainless Steel Screw Loader

Model #: C-12-K7208-6
Item No: 18349-M

  • 12" Screw

  • Discharge Height 67"

  • Stainless Steel Construction 

Custom Designed and Fabricated Column Lift

Item No: 18346-M

  • Built to dump V-Mag style carts

  • Floor height loading 

  • 35 Degree dump angle 

  • Dump Height 96"

  • Overall height 125"

  • 304 stainless construction 

Cozzi Auger Loader

Model #: CSLO 5000-5
Item No: 18343-M

  • Hopper size 60"L X 54"W X 72" T

  • 18" diameter auger discharge, 72"L, 50" discharge height 

  • Year of MFG: 11/2012

  • All Stainless Steel Construction 


Metler Toledo Inline Pipe Metal Detector

Item No: 18340-M

  • 4" Pipe 

  • Washdown Construction Stainless Steel 

Angelus Can Seamer 100-L

Model #: 100L
Item No: 18337-M

  • Can size 300 x 407 

  • Steam flow 

  • Straight line infeed

  • Auto lubrication 

  • Vibratory lid feed shoot

  • Base is in excellent condition no pitting 

Solbern High Speed Brinner

Model #: LBS
Item No: 18334-M

  • Overflow brinner/ sauce filler 

  • Stainless steel construction 

  • Can size 300 x 407 adjustable guides

  • Stainless steel tri-clover pump and fittings 

Meter Toledo Hi-Speed Checkweigher

Model #: XS Highspeed
Item No: 18331-M

  • Washdown construction stainless steel frame 

  • Touch screen operator interface 

  • Rejection pusher and station 

Zacmi Volumetric/Granular Pocket Filler

Model #: 48 Pocket
Item No: 18325-M

  • Can size 300 x 407 

  • Pocket size 2.5" diameter

  • Mechanical height adjustment 

Incline Screw Conveyor

Item No: 18322-M

  • Screw 12" diameter, 16' long, 72" discharge height 

  • Stainless steel construction 

Bulk Stainless Steel Hopper

Item No: 18319-M

  • Hopper size 60" long, 60" wide, 60" tall

  • Stainless steel construction 

  • Sloped bottom to slide gate discharge 

Olney Rotary Bean Washer

Item No: 18316-M

  • Rotary reel is 36" diameter, 48" long

  • Stainless steel construction 

  • Recovery pan sloped to 2" drain 

Olney Bean Destoner

Model #: 24" Destoner
Item No: 18313-M

  • Stainless steel ripple pan 24" wide 60" long 

  • Stainless steel tri-clover pump 2" in and out 

Elmar Piston Filler

Model #: RPE-554LILH
Item No: 18310-M

  • 54 station piston filler

  • Manufactured 2002

  • Can size 300 x 407

  • Stainless steel contact and base

  • Piston is 7.5" long, 2.75" diameter, 1" port

Metler Toledo Inline Metal Detector

Item No: 18307-M

  • Stainless steel inline pipe 4" diameter

  • Wash Down Construction 

Waukesha SPX Positive Displacement Pump

Model #: 220
Item No: 18304-M

  • Stainless steel positive displacement pump

  • 4" sanitary fitting on in and out 

  • Mounted on base

Lee Kettle 1000 Gallon

Model #: 1000-D9MS
Item No: 18301-M

  • Hemispherical stainless steel kettle New 2002

  • 1,000 gallon capacity

  • NAB # 9031

  • Max working pressure 58 Psi @ 305 Degrees 

  • Duel motion scrap agitation scrappers and pins are missing 

  • Split two part lid attached to bridge 

  • Lee kettle valve 4"

  • Stairs and operator platform surround kettle and is included 

Custom Designed and Fabricated Inspection Conveyor 12'L X 24"W

Model #: 12'L X 24"W
Item No: 18277-VO

  • NEW FOOD GRADE FRUIT AND VEGETABLE INSPECTION CONVEYOR

  • A single level conveyorized food process inspection table with a 12'L X 24"W conveyor belt running between 9 foot long UHMW plastic work surfaces.

  • Ideal as a trim line for fruit and vegetable inspection, trimming, coring, sorting, and rework

  • Sized for six workstations

  • Solid interlocking plastic chain type conveyor belt running between 1 3/8" high stainless steel sides.  

  • High density plastic work shelves, 9"W X 9'L  

  • Work surfaces and inspection belt at a 37 inch working height on adjustable height feet (adjustable for approximately 32" to 40").  

  • Gasketed PVC control box with on / off buttons and variable speed control  adjustable for up to 45 feet per minute.

  • All food grade stainless steel construction

Inspection Conveyor 15'L x 4'W

Item No: 18274-VO

  • 15 foot long by 4 foot wide plastic interlocking chain type belt, with small (approximately 1/4 inch) openings which could allow water to pass through

  • The belt runs beyond and between 7 inch high stainless steel conveyor sides, topped with UHMW plastic strips

  • Heavy duty stainless steel tubular frame set for a 32 inch working height as configured

  • All food grade stainless steel construction

  • Air spray cleaning header on discharge, under the belt, 1 HP 230/460 volt 3 phase stainless steel shrouded motor, with gear reducer drive

  • Unit will be fully serviced at the time of order and supplied in very good mechanical and cosmetic condition

Custom Designed & Manufactured 10' Wide Unloading Conveyor

Item No: 18256-MSC

  • Stainless steel construction

  • Overall dimensions 140"L X 140"W X  90"H

  • Spider style conveyor

  • Was previously used for unloading green beans from large bins

  • Blue poly belt

Buhler Aeroglide Dryer

Item No: 18244-MSC

  • 10'W X 41'L

  • Controls are included

  • Rigging fees are not included

Custom Stainless Steel Vegetable Washer

Item No: 18238-WSH

  • 5'W X 21'L X 32"D

  • 4' Rexnord belt elevating conveyor

  • 10 HP pump

  • All stainless steel construction

Urschel OV

Item No: 18232-ULI

  • .5HP 208/230V 3 phase stainless steel motor

  • All stainless steel construction

Urschel OV

Item No: 18229-ULI

  • .5HP 208/230V 3 phase stainless steel motor

  • All stainless steel construction

Hughes Fresh Market Corn Cob Cutting Line

Item No: 18226-MSC

  • Fresh curt cob line capacity estimated @ 2-3 tons per hour depending on feed rate and quality of product

  • Line consisting of the following equipment 

  • Hughes product conveyor 20' L x 18" W, stainless steel construction

  • Hughes cob feed shaker orienter to fresh market husker 10' L X 20" W

  • Hughes Husker Fresh Market 2 Lane

  • Hughes fresh market cob saw 

  • Includes platforms and controls 

Urschel Slicer OV

Model #: OV
Item No: 18223-ULI

  • 1/4" Cut head

  • Mild Steel Painted Frame

Urschel Dicer J9-A

Model #: J9-A
Item No: 18220-UD

  • Set: 3/8"

  • Stainless Steel Construction

Spin Dryer - Used

Item No: 18217-SPN

  • Stainless steel dryer includes basket

  • 32 gallon plastic perforated removable basket

Urschel G-A Dicer

Model #: G-A
Item No: 18205-UD

  • 2 HP motor, 230/460

  • Stainless Steel Frame

HMI Heinzen SB100 Auto Batch Dryer

Item No: 18184-WSH

  • Automatic centrifugal spin drying system for high volume drying of fresh cut produce (iceberg lettuce, spring mix, baby spinach, shredded carrots, cabbage slaw, chopped romaine, leafy products...).

  • Includes Z-shaped feed conveyor 12"W with a fine woven belt to allow water to pass through. It is configured with a 16" horizontal infeed, 150"L incline section and a 5' long discharge.  

  • 13 Cubic foot (30"Dia. X 32"Deep) stainless steel drum / dryer basket. Perforations are 5/32"Dia. round holes. Dryer basket has a clean unobstructed interior without spokes or axles in the product zone.

  • Air assisted product transfer and discharge

  • Central lubrication system

  • Stainless steel control box with Allen Bradley PLC control system. Systems includes touch screen operator control panel. This allows for quick product changeover by presetting hold times and other parameters for multiple products

  • All food grade stainless steel construction

A.K. Robins Pickle Spear Cutter

Model #: 82
Item No: 18151-MSC

  • Stainless steel frame

  • Roam rollers and fixed cutting head

  •  Adjustable legs

  • 208 - 230 / 460 Volts, 3.2 -3 / 1.5 Amps, 1 HP motor  

Urschel CC-D Slicer

Model #: CC-D
Item No: 18145-ULI

  • 1/4" shred assembly

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

Urschel CC-D Slicer

Model #: CC-D
Item No: 18142-ULI

  • 1/4" shed assembly

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

Urschel Comitrol 1700

Model #: Comitrol 1700
Item No: 18130-ULI

  • Standard Cut Assembly

  • Equipped with oil mist lubrication

  • 30 HP motor with sterns brake

  • 460 Volt 3 Phase

Urschel Comitrol 1700

Model #: 1700
Item No: 18127-ULI

  • Micro cut assembly setup

  • Equipped with oil mist lubrication

  • 30 HP Motor with Sterns Brake

  • 460 Volt 3 Phase

Urschel Comitrol 1700

Model #: Comitrol 1700
Item No: 18124-ULI

  • Micro Cut assembly setup 

  • Equipped with oil mist lubrication

  • 30 HP Motor with Sterns Break

  • 460 Volt 3 Phase

Urschel CC-D Slicer

Model #: CC-D
Item No: 18109-ULI

  • New 2001

  • 1/4" shred assembly included 

  • 10 HP motor 460 Volt, 3 phase

  • Stainless steel construction

  • Includes merchant Scmidt stainless steel stand on casters

Urschel CC-D Slicer

Model #: CC-D
Item No: 18106-ULI

  • 1/4" shred head assembly included

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

  • Includes Merchant Schmidt stainless steel stand on casters

Key Stainless Steel Vibratory Conveyor

Model #: S114112
Item No: 18076-SHK

  • 24"W x 94"L

  • Stainless steel frame

  • Stainless steel dimple pan

Key Stainless Steel Vibratory Conveyor

Model #: S114112
Item No: 18073-SHK

  • 24"W x 94"L

  • Stainless steel frame

  • Stainless steel dimple pan

Key Stainless Steel Vibratory Conveyor

Model #: S114112
Item No: 18070-SHK

  • 24"W x 94"L

  • Stainless steel frame

  • Stainless steel dimple pan

Sweco 48" Stainless Steel Vibratory Separator

Model #: SX48S86TLUE
Item No: 18001-SHK

  • 48" dual deck

  • Equipped with 10 mesh scalp deck

  • 8" height spacing frame and spout

  • Sweco sandwich screen #40 sieve size

  • Stainless steel construction 

  • 3HP drive 

  • Class II, Division 2, Group G Classification 

Incline Conveyor

Item No: 17992-COV

  • 9' stainless steel fixed incline conveyor with 12" wide white belting 

  • 5" infeed height and 32" discharge height 

  •  Side mounted 1/2HP motor and drive with power cord, 3PH, 480V

Incline Conveyor

Item No: 17989-COV

  • 90" stainless steel elevated fixed incline conveyor with 12" wide plastic belting

  • 59" infeed height and 72" discharge height 

  • Side mounted 1/2HP motor and drive with power cord, 3PH, 480V

FMC / JBT Sterilimatic 603 X 700 3 Shell Cooker Cooler System

Item No: 17983-MSC

  • FMC Pressure Cooker, 1224 can capacity

  • Set: 603 x 700

  • Serial  # 3624-40-60

  • PSI 33 #


  • FMC Standard Pressure Cooler, 336 can capacity

  • Set: 603 x 700

  • Serial # 3624-41-60

  • PSI 33 #


  • FMC Atmospheric Cooler, 912 can capacity shell

  • Set: 603 x 700

  • Serial # 3624-19-60

Vanmark Hydrolift Destoner

Item No: 17974-MSC

  • 6'H X 24"Dia. stainless steel hydrolift destoner

  • 60"W bottom hopper

  • 480V, 3 Phase  

Cornell 10" Food Pump

Model #: 10NHPP-F12K
Item No: 17962-PMP

  • New condition 

  • Mild steel valute and impeller

  • No motor, pulley or guard

Cornell 10" Foods Pump

Item No: 17959-PMP

  • 50HP motor

  • Mild steel valute and impeller

ABCO Steam Belt Blancher

Model #: B187ABBNT
Item No: 17947-BL

  • Stainless steel construction

  • Overall dimensions: 200" x 73" x 125"

  • Electric drive

  • 25,000 lbs. per hour

  • No Controls

Vanmark Hydrolift

Item No: 17938-MSC

  • 12'H X 24"Dia. stainless steel hydrolift destoner

  • 58"L X 24"W bottom hopper

  • Top mounted chute 

  • Stainless steel construction 

Hughes Cob Saw

Model #: B193SURIH
Item No: 17926-MSC

  • Designed for cutting off the tips and tails or cutting various sized cobbettes

  • Can be used for processing husked or unhusked corn

  • Capable of cutting other products such as carrots, celery, peppers and zucchini

  • Heavy duty stainless steel frame

  • Unit is 16'L x 5'W

Lyco Pouch Pasteurizer Cooler System

Model #: 8600
Item No: 17914-MSC

 Rotary Drum Pouch Pasteurizer

  •  72" X 16' 

  • One way lifting lid

  • 3 Hp Nord Gear Box and Motor 230/460 Volt 3 Phase

  •  Last running 1lb. pouch @ 1,500 lb./Hr. with 45 minute cook time

  •  New 2010

          Rotary Drum Pouch Cooler 

  • 72" X 12' 

  • One way lifting lid

  • 3 Hp Nord Gear Box and Motor 230/460 Volt 3 Phase


Hughes Blancher

Model #: 02-1471
Item No: 17911-BL

  • Reel size: 48"W x 12'L 

  • Screen perforation 1/8" 

  • Stainless steel construction 

Auto-Prod Cup Filler

Model #: FP2X8
Item No: 17860-MSC

  • 8-Lane Stainless steel products filler

  • With double indexer, cup feeder, lid denester, tamper evident 

  • Sealer with Allen Bradley Logix 5561 PLC controls

  • Kinetics 6000 Servo drives, Powerflex 40 VFD's #4

  • operated up to 390 CPM- 4oz., 4.5oz., 6oz., Plate diameter 75mm  

Magnuson 12 Roll Brush Washer

Model #: SP2123-375007.0107
Item No: 17845-MSC

  • Hydraulic drive and power pack 

  • Stainless steel construction

Zacmi 36 Pocket Filler

Model #: 36 Pocket
Item No: 17839-FIL

  • Set: 401/404 can Diameter

  • Cup Diameter is 3.36"

  • Rotation is counter clockwise 

  • Infeed/discharge 12" stainless steel 

  • Flat top stainless steel conveyor belt

  • Equipped with power brush, adjustable diversion gates, and level controls

  • All stainless steel construction

  •  No controls

Key Tegra 7775 Color Sorter

Model #: 7775 603593-1
Item No: 17827-MSC

  • Year: 2006

CCM Corn Cutter

Model #: SC8402-L
Item No: 17818-MSC

  • Designed to gently and automatically orient and feed cobs to an aperture-like cutting head which automatically adjusts to the size and taper of the cob as it cuts.

  • Feed system is designed to automatically remove cobs which are too small, and to attempt to clear cutting head jams without operator intervention.

  • Manufacturer rates for 110 to 130 ears per minute (average rate).

  • Food grade sanitary stainless steel construction

  • Hydraulically powered, with an  approximately 10 gpm hydraulic requirement.

  • Uses water to keep the at a rate of  7 approximately 7 gallons per hour, to lubricate the cutting head.

  • 16" wide x 20" long infeed belt leading to a 27" diameter sorting bowl for orientation (the "L" in the model number designates "Large bowl".

  • 40" long cob feed belt with reject. Separate 24" diameter sorting bowl. 6' high infeed and 32" high kernel discharge, 42" high cob discharge.

  • Hydraulic power pack (pump and reservoir system) required / not included

Damrow Brothers Horizontal Screw Cooker

Model #: Single Screw
Item No: 17812-CK

  • Approx. 12" Dia. X 10' L long screw

  • Cooker features steam injection

  • Approx. 4" X 7" end discharge

  • Mounted on stainless steel stand

  • Hinged lid

  • 5 HP electric motor

  • Stainless steel

Key Manta Color Sorter

Model #: Manta 2030F A-604184-1
Item No: 17806-MSC

  • Equipped with G-6

  • (2) Top IR lasers and (3) Top viewing cameras

  • Wet CIP system

  • Touch screen operator interface

  • Year 2008

Key Manta Color Sorter

Model #: Manta 2030F A-604162-1
Item No: 17803-MSC

  • Equipped with G-6

  • (2) Top IR lasers and (3) Top viewing camera

  • Wet CIP system

  • Touch screen operator interface

  • Year 2008

Fresh Tec Stainless Steel Washer

Item No: 17785-WSH

  • Fresh Tec Stainless Steel Washer

  • Size: 13' Long X 44" Wide X 30" Deep

  • 4 Pumps - 3 to washer 1 to reservoir

  • Stainless Steel Construction

  • Last Washing: Salad Product

Inline Volumetric Six Head Piston Filler

Item No: 17782-FIL

  • Inline Volumetric Six Head Piston Filler

  • Containers: 8 oz, 16 oz, 32 oz (70 mm neck opening)

  • S/N: 37179

  • New in 2017 - Never Used

  • Sanitary Design

  • 3-Way Filling Valve

  • Estimated Rate of Production: 45-55 containers per minute @ 16 oz

Key Tegra 7775 Color Sorter

Model #: 7775 602226-1
Item No: 17773-MSC

  • Equipped with G-6

  • (2) Top Cameras 

  • Product stabilizer

  • Touch screen operator interface

  • Wet CIP System 

  • Year: 2001

Key Tegra Color Sorter

Model #: 7775
Item No: 17770-MSC

  • Equipped with G-6

  • (2) Top and (2) Bottom cameras

  • Touch screen operator interface 

  • Wet CIP system 

  • Year: 2004

FMC 4 Shell Sterilimatic 300 x 407 Cooker Cooler System

Item No: 17746-CK

  • 1st Shell FMC Pressure Cooker: 3,024 can capacity, Set: 300 x 407, serial # 364231499, PSI 33 #, NB # 3093

  • 2nd Shell FMC Pressure Cooker: 2,856 can capacity, Set: 300 x 407, serial # 3635-33-47, NB # 11

  • 3rd Shell FMC Pressure Cooler: 798 can capacity, Set: 300 x 407, serial # 3635-34-47, NB # 12

  • 4th Shell FMC Atmospheric Cooler: 2,226 can capacity, Set: 300 x 407, serial: 3442-130-84

Lyco Hydrosieve

Item No: 17737-MSC

  • Screen Dimensions: Approx. 24"W x 29"L

  • Serial: STS 0307 48673

  • Screen Size: .125

Lyco Hydrosieve

Item No: 17734-MSC

  • Screen Dimensions: Approx. 24" W x 29" L

  • Serial: STS 0307 48671

  • Screen Size: .125

Lyco Hydrosieve

Item No: 17731-MSC

  • Screen Dimensions: Approx. 24" W x 29" L

  • Serial: STS 0307 48674

  • Screen Size: .125

Lyco Hydrosieve

Item No: 17728-MSC

  • Screen Dimensions: Approx. 24" W x 29" L

  • Serial: STS 0307 46672

  • Screen Size: .125

Lyco Hydrosieve

Item No: 17722-MSC

  • Screen Dimensions: Approx. 36" W x 29" L

  • Serial: STS 0307 48669

  • Screen Size: .125

Key Optyx 3755 Color Sorter w/ G6 Pkg.

Model #: O3109537
Item No: 17653-MSC

  • Year: 2012

  • No in-feed shaker

Arrowhead Systems Lowerator

Item No: 17623-MSC

  • Arrowhead Systems Stainless Steel Lowerator

  • Adjustable width up to 11-3/4"

  • 156" intake height and a 36" discharge height

  • Gripper chains are driven by duel 1.5 hp 1755 rpm motors - reduced to 175 rpm

  • Requires 230/460 vac 3 phase electrical supply

Odenberg Steam Peeler

Model #: 20507
Item No: 17608-PLR

  • Model: M-450

  • Serial: 10183

  • 450 Liter

  • Pressure Vessel #: 20507

  • National Board #: 539

  • 250 PSI. 420˚ F

MTC Stainless Steel Hydraulic Tote Dumper

Model #: LE
Item No: 17578-DMP

  • MTC Stainless Steel Hydraulic Tote Dumper

  • Model: LE

  • Serial: 4925

  • 4,000# capacity

  • Fits approx. 54” x 50” totes @ 80” Pivot

  • Approx. 29" Loading Height

  • No hydraulic power pack

 


Lyco Waste Water Reel

Model #: 48/60
Item No: 17548-MSC

  • Lyco Waste Water Drum/Reel

  • Model: 48/60

  • Serial: DS129919134-1

  • Stainless Steel Construction

  • Louvered Screens On Outer Drum 60" Dia. X 96" L

  • Screen: .045

  • Inner Drum Has Been Removed And Not Included With Unit

  • No Drive With Drum, Main Drive Chain Is Attached With Drum Sprocket

Rotary Cabbage Coring Machine (NEW)

Item No: 17527-MSC

  • Rotary Cabbage Coring Machine (NEW)

  • 4-Station Continuous Cabbage Corer

  • Manufacturer rated for up to 28 heads per minute

  • Manual head placement on a revolving table

  • Stainless steel product contacts, support frame, & screen shrouds

  • Knives available to cut but leave the core (e.g. for sauerkraut), or to remove the core (e.g. for fresh-cut cole-slaw)

  • 1.5 HP 208/230/460 volt 3-phase motor

Lyco 8700 Cooker/Cooler

Model #: 8700
Item No: 17512-CK

  • Lyco Cooker/Cooler

  • 72" Dia. x 32' L

  • Model: 8700

  • 8' Cook Length / 24' Cool Length

  • Screen Size: 3/8" Perforation

  • Stainless Steel Construction

Ambient Air Cooler

Item No: 17506-BL

  • Ambient Air Cooling Tunnel

  • Belt dimensions: 8’W x 32’L

  • Belt type: Stainless Steel wire mesh



Key Technology Turbo-Flo Blancher

Item No: 17503-BL

  • Key Technology Turbo-Flo Blancher

  • Belt Width: Approx. 8' W

  • Overall Length: Approx. 39' L

  • Belt type: Stainless Steel wire mesh

  • Age: 2004

  • Power: 460VAC/ 90Amp/ 3Ph/ 60Hz

  • Controls: Allen Bradley Micrologix 1000

  • Last blanching diced potatoes



Lyco Cooker/Cooler Model 8900

Model #: 8900
Item No: 17461-CK

  • Size approx. 60" Dam. x 20'L

  • Screen Perforation 1/16"

  • Cooker length: 16'

  • Cooler length: 4'

  • Stainless steel construction

  • No pumps or control panel

  • Missing one drive and gear box

Dontech Rotary Screen

Item No: 17437-MSC

  • Dontech Rotary Screen

  • Model: ERDS2572L

  • Serial: 2513

  • Screen Size: .040

Lyco Dirt Reel Washer

Item No: 17434-MSC

  • Lyco Dirt Reel Washer

  • Rotating drum w/ internal spray

  • Drum Dimensions: 36" Dia x 12' L x 1/4" spacing

  • Serial #: DR 0805 41302

  • 3 HP, 230/460V, 60 Hz, 3 Ph motor


Lyco Abrasive Peeler/Washer

Item No: 17431-PLR

  • Lyco Abrasive Peeler/Washer

  • Hydraulic auger and abrasive peeler/washer

  • In-feed Height: 48"

  • Discharge Height: 27"

  • Equipped with flow control and flow restriction valve

  • 7 brush rollers driven by hydraulic motors

  • No hydraulic power pack

  • Unit Needs Complete Reconditioning



A.K. Robins Model 81 Vegetable Tumble Washer

Model #: Model 81
Item No: 17413-WSH

  • A.K. Robins Model 81 Vegetable Tumble Washer

  • 30" Dia. x 132" L drum -- with 1/4" dia. reel perforations for first 120" -- then 12" solid (non-perforated) discharge

  • Wash barrel has multiple (removable) lifting paddles on inside of reel

  • Full-length stainless steel spray header spray manifold running through the inside of the washer reel

  • 17" W x 21" L tapered in-feed hopper into the solids separation/water reclaim reel

  • 32" in-feed height & 17" discharge height as currently configured

  • Bottom wash-water recovery tank has (2) clean-out doors on each side and a 4-3/4" dia. center bottom outlet at 9" discharge height

  • Food grade stainless steel construction including reel, support frame and shrouding

  • Lubrication cluster for trunnions

  • Powered by a 1 HP, 230/460V, 3 phase gear motor chain drive with on/off switch

G.J. Olney FC 24 Foam Cleaner

Model #: FC 24
Item No: 17398-WSH

  • The Olney Foam Cleaner combines flotation cleaning and screening to provide the cleanest product.

  • An air manifold system incorporates air into the flotation tank to increase buoyancy and float trash, such as hollow or broken kernels and corn silk, to the surface.

  • Corn kernels are de-watered and screened on the vibratory discharge shaker and discharged separately from the trash.

Cornell Food Pump w/ Commercial Vortex Tank

Model #: 6NHPP-F16K
Item No: 17371-PMP

  • Cornell 6NHPP-F16K Food Pump w/ Commercial Vortex Tank

  • Expanded volute cast mild steel pump housing

  • 6" flange inlet/discharge ports

  • Flexible connection between pump and tank

  • All stainless steel tubular support frame and vortex tank

  • Tank measures 42" L x 30" W x 20" Deep

  • Water inlet diffuser/diverter in tank

  • 5 HP 230/460V, 2 Phase belt drive motor w/ mechanical variable speed pulley

Urschel VSC Segment Cutter

Model #: VSC
Item No: 17368-ULI

  • Urschel VSC Segment Cutter

  • Urschel Velocicut 4" Dia. 8-segment Wedge Cut Head

  • Factory stainless steel electrical control panel with safety interlock system

  • Aftermarket VFD within a PVC control box

  • 5 HP, 3 phase motor


Kerian Model 70-L30

Model #: 70-L30
Item No: 17344-GRD

  • Kerian Model 70-L30

  • Model: 70-L30

  • Serial: 33L634

  • Straight PVC rollers - 1-5/16" outside diameter

  • Last used with kiwi



Custom Designed & Manufactured Belt Steam Blancher

Item No: 17329-BL

  • 15' L x  30" W belt
  • Continuous steam belt blancher with a 30" wide interlocking plastic chain type belt. (Belt is formulated for high temperatures)
  • 1/16" by 3/4" elongated belt perforations
  • Tunnel --  22" long open in-feed area - feeds into the 15' long enclosed steam tunnel with top and bottom steam injection headers, leading on to a 24" long open discharge section.
  • Complete with water sprays on infeed and discharge
  • 4.5" maximum product clearance under removable top covers.
  • Has a water collection and drain pan on the in-feed end only.
  • All food grade stainless steel product contacts, conveyor and tunnel body, and support frame currently set at a 29" working height.
  • Overall Dimensions: 21' 7" L x 48" W x 43" H
  • 3/4 HP 208 / 230 / 460 volt 3 phase stainless steel motor
  • Fixed speed gear drive set for 45 foot per minute belt speed.
  • No controls or valves
Lyco Hot Water Rotary Reel Blancher

Item No: 17326-BL

  • 48" Dia. x 8' L Drum
  • Perforations: 1/16"
  • In-Feed Height: 60"
  • Discharge Height: 48"
  • Stainless Steel Construction
  • Trunnion Driven Drum: 1 HP, 230/460 V, 3 Ph motor

Rotary Cabbage Coring Machine

Item No: 17272-MSC

  • Rotary Cabbage Coring Machine
  • 4-Station Continuous Cabbage Corer
  • Manufacturer rated for up to 28 heads per minute
  • Manual head placement on a revolving table
  • Stainless steel product contacts, support frame and screen shrouds 
  • Knives available to cut but leave the core (e.g. for sauerkraut), or to remove the core (e.g. for fresh-cut cole-slaw)
  • 1.5 HP 208/230/460 volt 3-phase motor 

Lyco Hot Water Rotary Blancher

Item No: 17260-RT

  • Size: 60" Dia. x 8' L
  • 1/8" Perforations
  • 2-Way Pneumatic Power Assist Cover Lift
  • 44" In-feed Height
  • Ferris-Wheel Discharge w/ discharge chute @ 55" height
  • CIP system w/ 2 spray bars and stainless steel centrifugal pump
  • Trunnion-driven drum w/ 3HP, 230/460V, 3 Ph motor
  • Stainless Steel Construction

Lyco Rotary Drum Cooker/Cooler

Model #: 8900
Item No: 17257-CK

  • Model: 8900
  • 60" Dia. x 12' L
  • 8' Cook / 4" Cool
  • 5/32" drum screen perforations.
  • 2- way pivoting hood with pneumatic cylinder power lift
  • Dimpled (non-stick) stainless steel in-feed and discharge chutes. Built in CIP system including centrifugal pump for sanitation.
  • Stainless steel control panel.
  • Each drum has it's own 3 HP drive, and there is a 7.5 HP drive on the centrifugal CIP pump.
  • All drives are 208/230/460 volt, with 460 volt 3 phase electrical input to the control panel.
  • Food grade USDA sanitary stainless steel construction.
  • Removable access doors in the cooking and cooling reels for clean out.

Freshline 2 Drum Dryer

Model #: 950
Item No: 17185-DR

  • Model # 950

  • Serial # 04041078

  • Accumulation Conveyor

  • In-feed Conveyor

  • Discharge Conveyor

  • Stainless Steel Control Panel

  • Stainless Steel Construction

  • 50 Second fill time

  • Full drum 130 pounds

Marchant & Schmidt MS80 Cheese Cubing Machine

Model #: MS80
Item No: 17173-MSC

  • Marchant and Schmidt MS80 Cheese Cubing Machine
  • Capable of cutting (2) 40 lb. blocks of cheese at one time
  • Fully automated w/ product rates up to 10,000 lbs/hr.
  • Quick change harps
  • Fully enclosed cutting chamber

Dofra Bell Pepper Coring Machine

Model #: PD6000 20044631
Item No: 17164-MSC

  • Dofra Bell Pepper Coring Machine
  • Model: PD6000 20044631
  • Year: 2013
  • 1985 lb. capacity

Dofra Bell Pepper Coring Machine

Model #: PD6000 20044631
Item No: 17161-MSC

  • Dofra Bell Pepper Coring Machine
  • Model: PD6000 20044631
  • Year: 2013
  • 1985 lb. capacity

Lyco Screw Press

Model #: 2000
Item No: 17152-MSC

  • Model: 2000
  • Serial: SP069916615
  • 12" Dia. Screw
  • 10 hp Motor
  • Stainless Steel Construction

Key Iso-Flo Vibratory In-feed Shaker

Model #: 600722-1
Item No: 17140-SHK

  • Key Iso-Flo Vibratory Infeed Shaker

  • Model: 600722-1

  • Serial: 97-29164

  • Shaker Pan Dimensions: Approx. 53" W x 74" L

  • With Approx. 24" L De-watering Screen

  • Leg Height: Approx. 67"

  • Stainless Steel Construction



Key Iso-Flo Feed Shaker

Item No: 17134-SHK

  • Key Iso-Flo Feed Shaker
  • Overall Dimensions: 120" L x 24" W
  • Two Channel Shaker
  • Channel A: Approx. 8-1/4" W
  • Channel B: Approx. 15-1/2" W
  • 1 HP, 220/380V, 60 Hz, 3 Phase Motor

Key Iso-Flo Feed Shaker

Item No: 17131-SHK

  • Key Iso-Flo Feed Shaker
  • Overall Dimensions: 120" L x 24" W
  • Two Channel Shaker
  • Channel A: Approx. 8-1/4" W
  • Channel B: Approx. 15-1/2" W
  • 1 HP, 220/380V, 60 Hz, 3 Phase Motor

Key Iso-Flo Feed Shaker

Item No: 17128-SHK

  • Key Iso-Flo Feed Shaker
  • Overall Dimensions: 120" L x 24" W
  • Two Channel Shaker
  • Channel A: Approx. 8-1/4" W
  • Channel B: Approx. 15-1/2" W
  • 1 HP, 220/380V, 60 Hz, 3 Phase Motor

Key Iso-Flo Feed Shaker

Model #: S1022773-1
Item No: 17125-SHK

  • Key Iso-Flo Feed Shaker
  • Model: S1022773-1
  • Serial: 10-419307
  • Overall Dimensions: 120" L x 24" W
  • Two Channel Shaker
  • Channel A: Approx. 8-1/4" W
  • Channel B: Approx. 15-1/2" W
  • 1 HP, 220/380V, 60 Hz, 3 Phase Motor

Key USDA Cross Feed Ceiling Mounted Vibratory Distribution for (4) VFFS Machines

Model #: S10132731
Item No: 17044-MSC

  • Key USDA Cross Feed Ceiling Mounted Vibratory Distribution for (4) VFFS Machines --- Suspended from ceiling
  • Model: S10132731
  • Approximate Complete System Dimensions: 310" L x 202" W
  • 92" Centers Between Side Pan Discharge Chutes on Left Side
  • 101" Centers Between Side Discharge Chutes on Right Side
  • Consists of the following:
  • (1) Key Model S1013273-1 S/S Iso Flo 14" W x 121" L x 5-1/2" D Vibratory Distribution Conveyor -- 2,500 Pound Per Hour Maximum Capacity, Maximum Stroke 6.0, Design Stroke 4.5, Design Speed 853 RPM, Bulk Density 35 Cu Ft, (2) Pneumatic Off-Set Discharge Gates, Fines Screen, 1 HP S/S Motor, Overall Dimensions 121" L x 36-3/4" W x 44 1/4" H.
  • (1) Key Model S1013274-1 S/S Iso Flo 14" W x 89" L x 5-1/2' D Vibratory Distribution Conveyor -- 2,500 Pounds Per Hour Maximum Capacity, Maximum Stroke 6.5, Design Stroke 5.0, Design Speed 834 RPM, Bulk Density 35 Cu Ft, (2) Pneumatic In-Line Discharge Gates, 1 HP S/S Motor, Overall Dimensions 89-1/4" L x 32-3/4" W x 50 1/8" H.
  • (4) Key Model S1013275-1 S/S Iso Flo 10" W x 87" L X 8-5/16" D (high end) 5" D (low end) Vibratory Conveyor, 550 Pounds Per Hour Maximum Capacity, Maximum Stroke 6.0, Design Stroke 5.0, Design Speed 975 RPM, Bulk Density 35 Cu Ft, 5 3/4" Diameter End Discharge, 1 HP S/S Motor, Overall Dimensions 101 7/16" L x 28 3/4" W x 43 3/8" H. 460V, 3 Ph, 60 Hz.

Lee 200 Gallon Dual Motion Scraped Kettle w/ INA Style Agitation

Model #: D9MS
Item No: 17017-KT

  • Model: D9MS
  • S/N: 13872-1-1
  • Year: 2000
  • MAWP 90 PSI @ 332˚ F
  • MDMT 90 PSI @ -20˚ F
  • NB# 8132
  • Fixed bridge inclined dual motion agitator
  • Single hinged cover
  • 51" dia x 51" deep x 115" OAH (9' 7")
  • 4-1/2" CBO with Fluid Flow valve model BFT
  • MISSING tag on motor -- approx. 5 HP
  • Temperature probe (Missing Gauge)
  • Last used in food industry

Hycor Rotostrainer

Model #: RSA 3672 - .005
Item No: 17011-MSC

  • Hycor Rotary Waste Screen
  • Model: RSA 3672 - .005
  • Serial: H1902007
  • Drum Dimensions: 36" Dia. x 72" L
  • Stainless Steel Construction

Cornell 6" Food Pump w/ Key Stainless Steel Vortex

Model #: 6NHPP-F16K
Item No: 16981-PMP

  • Key Cornell 6" Food Pump w/ Key Stainless Steel Vortex
  • Model: 6NHPP-F16K
  • Serial: 155524 13.50
  • Vortex Dimensions: 43" L x 32" W x 21" Deep
  • 7.5 HP motor



Custom Designed & Manufactured Incline Conveyor

Item No: 16972-COV

  • Custom Designed & Manufactured Incline Conveyor
  • 24"W x Approx. 15' L

Custom Designed & Manufactured Incline Conveyor

Item No: 16969-COV

  • Custom Designed & Manufactured Incline Conveyor
  • 24"W x Approx. 15' L

Lyco Cooker Cooler

Model #: 8900
Item No: 16954-CK

  • Lyco Cooker Cooler
  • Model: 8900
  • Serial: RDBC O498-14421
  • 60" Dia. x 24' L
  • 16' Cook Length / 8' Cool Length
  • Stainless Steel Construction
  • Screen Size: 1/4"
  • Year: 1998

(NEW) Magnuson Model F Trough Belt

Model #: F
Item No: 16945-MSC

  • (NEW) Magnuson Speed Up Belt
  • Model: F
  • For single file controlled flow of products on a 60-degree V-belt conveyor, two belt sections and two belt speeds
  • Includes (1) 1/2 HP, 230/460 V, 3 Phase, 60 cycle gear motor
  • Stainless steel construction

Key Iso-Flo De-watering Shaker

Model #: 407-666-1
Item No: 16939-SHK

  • Key Iso-Flo De-watering Shaker
  • Model: 407-666-1
  • 40" W x 65" L
  • Serial: 88-312888
  • 40" W x 28" L de-watering screen section
  • 40" W x 65" L overall deck
  • 40" W x 14" L x 14" Deep Stainless Steel catch pan
  • 1 HP Key Iso-flo electric motor belt drive
  • 575 volts, 1740 RPM, 60 Hz, 3 phase
  • Stainless Steel stand & construction
  • No screens

Custom Designed & Manufactured 4-Roll Abrasive Peeler- Stainless Steel

Model #: 4-Roll
Item No: 16924-PLR

  • Model: 4-Roll Peeler

  • (4) abrasive rolls -- each 6" Dia. x 6' L
  • 39" Discharge height
  • Water, peels, and debris drop to a full length stainless steel water catch pan with a 6" x 6" center bottom outlet
  • Unit can be set with any combination of abrasive or poly brush rolls to buyer's needs/specifications

Key Shaker

Item No: 16921-SHK

  • Key Dog Bone Shaker
  • 24" W x 40" L In-feed
  • Hopper w/ Side Discharge
  • 22" W x 42" L De-watering Deck (OAL 51"L)
  • 22" W x 13" L Collection Pan
  • Ajax #2 Shaker
  • 3/4 HP Motor


LYCO Reclaim Reel

Model #: 36 x 60
Item No: 16915-MSC

  • Model: 36 x 60
  • Serial: ODS-1205-42470
  • Drum Dimensions: 36" Dia. X 60" L
  • Overall Dimensions: 60" W X 106" L x 117" H
  • Screen openings: 1/16" perfs. -- spaced 1/8" on center
  • Capacity: 1200 GPM - (Application dependent)
  • 304 Stainless Steel Construction
  • New in 2005
  • Previously ran dry beans

Stainless Steel Screw Elevator

Item No: 16873-MSC

  • 12" Dia. x 15' L
  • 24” In-feed height
  • 108” Discharge height
  • 13" W x 15" Deep Covered Screw Discharge
  • Chain driven
  • Stainless Steel base with casters
  • No drive

Commercial Tumbler/Rotary Washer

Item No: 16822-MSC

  • Commercial Tumbler/Rotary Washer
  • Built by Commercial Manufacturing and Supply Co.
  • 72" diameter x 11'4" L
  • S/N: T5958753
  • Job #: 8753
  • 40" inlet, 53" discharge, 8" water drain
  • Approx. 3/8" perforations
  • (8) 6" H lifters.
  • Has (2) bars with spray nozzles.
  • Stainless Steel
  • Driven by 5 HP, 208-230/460 V, 1725 RPM input motor.
  • Previously used in sanitary/food processing plant for washing vegetables.

Urschel G-A Dicer

Model #: G-A
Item No: 16816-UD

  • Urschel Dicer
  • Model: G-A
  • All Stainless Steel
  • Complete with magnetic disconnects
  • Set for 3/8" Dice (9.5 mm)




Shufflo Two Stage Speed-up Belt

Model #: SFF
Item No: 16807-MSC

  • Model: SFF
  • Serial: 4426-4
  • 90" L x 2-1/2" H
  • 1-1/2 HP 230/460V 3 PH Motor - 1740 RPM

Single Stage Speed-up Belt

Item No: 16804-MSC

  • Single Stage Speed-up Belt
  • 84" L x 5" H
  • 1HP 230/460V 3 PH Motor - 1745 RPM

GDC Shufflo Feeder Cutter

Item No: 16801-MSC

  • Grovedale Corp. Shuffalo Feeder Cutter
  • Approx. 48" W x 6" Steep

Urschel RA-A Dicer

Model #: RA-A
Item No: 16777-UD

  • Urschel Dicers
  • Model # RA-A
  • Set For 1/4" Dice
  • 3 HP, 230/460V, 3 Phase motor
  • Control Box and Magnetic Disconnects Included
  • All stainless steel contact



Holac HA-125 N Dicer

Model #: HA-125 N
Item No: 16756-UD

  • Model: HA-125 N
  • Serial Number: 121-65-03
  • Grid Size : 1" x 1"
  • HA 125 can process loose or pre-formed products
  • The HA can produce cubes, slices, flakes, or strips from meat, poultry and seafood
  • Output: up to 6,000 #/hr
  • Year: 1997
  • Stainless Steel Construction

Arpac Bundler/Wrapper with Tunnel

Model #: 105-28
Item No: 16678-PAK

  • Model:105-28
  • Self-contained bundler and shrink tunnel - OEM rated up to 30 TPM depending on application
  • Straight-thru operation 28" W seal bar  x 11" H seal bar opening x 27" maximum film width
  • Wrapped product enters a 14" H x 28" W tunnel opening via a 21" W silicone topped belt
  • Allen-Bradley SLC 150 Processor
  • Electrical: 460V - 3Ph - 60Hz
  • Footprint:  50" W x 180" L (add 39" to length for in-feed conveyor)

FMC 12 Pocket Granular Fillers

Model #: 12-G
Item No: 16675-FIL

  • FMC 12 Pocket Granular Filler
  • Model: 12-G
  • Serial: N/A
  • Set: 603 x 700
  • Stainless Steel Contact
  • Mild Steel Painted Base
GEM Steam Belt Blancher

Item No: 16594-BL

  • GEM Steam Belt Blancher
  • Capacity 7,000
  • 36" Wide X 16' Long
  • 9' Product Infeed , 42" Product Discharge
  • 8' Steam Section top and bottom steam header and 8' Hot hold bottom steam header
  • Rotary Valves for infeed and discharge gives a even feed to the belt maintaining consistent product depth
  • Hood lifts for easy cleaning and service of product belt
  • Hydraulic Powered Valves
  • Steam Controls Included

Bin Dump W/ Live Bottom

Model #: 48" X 48"
Item No: 16585-VO

  • Custom Designed Bin Dumper With Live Bottom Designed to Handle 48" Tall Macro Bins 48" Square
  • Has Hopper Level Gate to Meter Discharge of Conveyor
  • Stand Alone Hydraulic Package
  • Stainless Steel Construction

Weigh Conveyor

Item No: 16552-MSC

  • 39" W x  15-3/4' L
  • Sterling 1-1/2 HP, 3PH, 230/460V, 60Hz motor

I & H Engineered Systems Spray Tunnel

Model #: 5 X 40
Item No: 16546-MSC

  • Model 5 X 40
  • Approximate 5' W x 40' L plastic belt
  • Driven by a 2HP, 360/575 volt, 3460 rpm variable speed gear motor
  • End in-feed with adjustable height panel.
  • Internal spray bars
  • End feed with a 60" wide adjustable height air knife
  • New York Blower, size 1908a-A7-1/2, shop# E-4413-1115, driven by a 7.5hp motor
  • Includes (3) Burks centrifugal pumps, model TF350GA6-1-1-1/2-5.66SP
  • Each driven by a 5HP motor
  • (2) New York blowers, size 182, shop # E-4413-105, and a control panel
  • Mounted on a stainless steel frame with stainless steel side panels
  • Job# 2897E-2
  • Built 1989
  • Last used in a juice operation


Key Optyx Color Sorter

Model #: Key Optyx 602942-1
Item No: 16525-MSC

  • Key Technologies Optyx Color Sorters
  • M/N: Key Optyx 602942-1
  • S/N: 03-100347
  • No in-feed shaker

A&M Process Equipment Stainless Steel Dual Shaft Double Ribbon Blender

Model #: DRB600
Item No: 16519-MIX

  • M/N: DRB600 53" W x 83" L x 41" Deep
  • Ribbon agitators: 25" Dia. Double-Helix 1-1/2" by 1/4" ribbons outside 3" Dia. shaft - pneumatic glands
  • Each Ribbon Shaft has 7.5 HP 3 phase drive w/ gear reducer - belt and pulley drive configuration
  • 3" Dia. Tri-clamp end bottom discharge outlet in each "U" trough
  • 65" In-feed Height
  • 22" Discharge Height
  • Hinged covers w/ pour grids and safety interlock switches for each side
  • Stainless Steel Construction

Gering Onion Peeler

Item No: 16516-PLR

  • Gering Onion Peeler
  • 144" L x 36" W x 60"H
  • NORD Gearboxes and Motors Air Requirements -- 90 PSI @ approx. 200 CFM
  • Peels Onions from 1-1/2" to 6"
  • Electric
  • All Stainless Steel Construction

Zacmi 48-Pocket Filler

Model #: 233
Item No: 16501-FIL

  • ZACMI 48 Pocket Granular Filler
  • Model: 0233
  • Serial: 0233-48-T-96
  • Set @ 300 X 407
  • Stainless Steel Construction

Custom Manufactured & Designed Tomato Slicer

Item No: 16492-ULI

  • Custom Manufactured & Designed Tomato Slicer
  • Stainless Steel Construction
Fox Leader Fillers

Item No: 16489-FIL

  • Set @ 300 x 407 - adjustable
  • Stainless Steel Construction
Brown 2200 Finisher

Model #: 2200
Item No: 16486-PLP

  • Model: 2200
  • S/N: 2205-AA-1
  • SS Frame
  • 1.6 HP Motor 230/460V, 60Hz, 3 Ph Motor

Urschel Dicer H

Model #: H
Item No: 16483-UD

  • Urschel Stainless Steel Dicer
  • Model: H
  • Currently Set 3/4" dice
  • Magnetic Disconnects
  • Stainless Steel Frame

Key Stainless Steel Tote Dump System

Model #: 426269-1
Item No: 16447-MSC

  • Hopper Size: 44" W X 54 " H
  • Pivot Point 9' H
  • Overall Height: 11' 6"
  • Year: 1998
  • No Hydraulic Power Pack

Lyco Screw Press

Model #: 2000
Item No: 16426-MSC

  • Model: 2000
  • Serial: S-P030020112
  • 12" Dia. Screw
  • 10 hp Motor
  • 42" of Screen W/ 3/32" Perfs
  • Stainless Steel Construction

Custom Designed & Fabricated Double Drum Stainless Steel Pea Grading Reel

Item No: 16390-GR

  • Stainless Steel Reels
  • Mild Steel Frame
  • 10' L x 30" Dia.
  • (1) Reel .36 Round Perforations
  • (1) Reel .3 Square Perforations

Custom Designed & Fabricated Stainless Steel Mix Tank

Item No: 16387-TK

  • Stainless Steel Single Shell
  • 33" Dia. X 49" H

Groen Pressure Kettle

Model #: TA-20-SP
Item No: 16381-KT

  • M/N: TA-20-SP

  • S/N: 716

  • NAB #:24037

  • Max. Working Pressure: 60 psi

  • Single Agitation


Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16372-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .350 Round Perforations
Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16369-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .300 Round Perforations
Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16366-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .280 Round Perforations
Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16363-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .370 Round Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16360-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .350 Round Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16357-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .300 Square Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16354-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .370 Round Perforations
Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16351-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .310 Round Perforations
Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16348-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .280 Round Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16342-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .350 Round Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16339-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .280 Round Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16336-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .300 Round Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16333-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .340 Round Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16330-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .320 Round Perforations

Custom Designed & Fabricated Stainless Steel Pea Grading Reel

Item No: 16327-MSC

  • Overall Reel Size: 30" Dia. X 60"H
  • .310 Square Perforations

Commercial De-Watering Shaker

Item No: 16324-SHK

  • 15" W x 57" L

Key Flotation Washer with Dewatering Discharge Conveyor

Item No: 16318-WSH

  • Washer Dimensions: 42" W x 60" L
  • Conveyor Dimensions: 42" W x 56" L
  • 4" Recircation Pump
Custom Designed & Fabricated Flotation Washer

Item No: 16315-WSH

  • 30" W x 60" L
  • 3" Re-circulation Pump
  • Stainless Steel Construction

Key Reclaim Reel

Model #: 5312-C-4
Item No: 16300-MSC

  • M/N: 5312-C-4
  • S/N: 83-53-140
  • 18" D x 36" L
  • Perfs: .060
  • Baldor 1/2 HP motor
  • Stainless Steel Construction
Key Dewatering Shaker

Item No: 16288-SHK

  • Stainless Steel Construction
  • 24" W X 76" L
  • Ajax Shaker
Key 2X Air Cleaner

Item No: 16279-MSC

  • 18" W X 48" L
  • Mild Steel Construction and Frame

Urschel Green Bean Cutter

Model #: 30-C
Item No: 16273-CTR

  • Model: 30-C
  • S/N: 2752
Key Reclaim Reel

Item No: 16270-MSC

  • Model: 406-901
  • Serial: 87-53196
  • 18" D x 36" L
  • Perfs: .060
  • Baldor 1/2 HP motor
  • Stainless Steel Construction

Commercial Vibratory In-feed Shaker

Item No: 16267-SHK

  • Dewatering Pan 18" W x 42" L
  • Ajax Shaker

Key 2X Air Cleaner

Item No: 16264-MSC

  • 24" W x 48" L
  • Stainless Steel In-Feed Shaker
  • Ajax Shaker with 5 HP Blower Motor
  • (Missing Upper Leaf Hopper)



Key 2X Air Cleaner

Item No: 16261-MSC

  • 24" W x 48" L
  • Stainless Steel In-feed Shaker
  • Ajax Shaker with 5 HP Blower Motor
  • (Missing Upper Leaf Hopper)



Custom Designed & Fabricated Reclaim Reel

Item No: 16255-MSC

  • 48" L x 24" Dia.
  • .060 screen
  • Stainless Steel Construction
  • Stainless Steel Frame

Key Quality Grader

Model #: 918-D
Item No: 16249-WSH

  • Stainless Steel Construction
  • 4" Pump
  • 3 HP Motor
  • Ajax Shaking Unit 18" W x 52" L
G.J. Olney Destoner Washer

Model #: 24 MINI MAX
Item No: 16240-WSH

  • 24" Wide Ripple Pan X 72" Long
  • Equipped with 2 HP Return Pump
  • 1/2 HP Drive on the Discharge Conveyor

Marion Paddle Blenders

Model #: 1001
Item No: 16231-MIX

  • Model # 1001
  • Serial # 80024
  • 3 Cu. Ft. Capacity
  • 12" Wide X 24" Long X 16" Deep
  • 4" Dia. Center Bottom Discharge 
  • 3/4 Hp 1725 RPM 115/230 Volt Motor

Vertiflo 6" Stainless Steel Hydro Food Pump

Model #: 1326
Item No: 16222-PMP

  • Size: 6" x 6" x 10"
  • Motor: 20 HP 230/460 V
  • Stainless Steel Frame

Vertiflo 6" Stainless Steel Hydro Food Pump

Model #: 1326
Item No: 16219-PMP

  • Size: 6" x 6" x 10"
  • Motor: 20 HP 230/460V
  • Stainless Steel Frame

Urschel GK-A Dicer

Model #: GK-A
Item No: 16135-UD

  • Urschel Dicer

  • Model: GK-A

  • Serial: 1249

  • Set: 1/2" Dice - Crinkle Cut

  • Stainless Steel Frame

Brown Screw Extractor/Finisher

Model #: 3900
Item No: 16075-EX

  • Stainless steel screw auger with fine .033 screen (Approximate)
  • Air operated discharge for maximum press with 7 122 HP 230/460 Volt vari-drive motor
  • With hopper in-feed
  • Stainless steel base
  • Rated up to 50 GPM input
  • All stainless steel construction


Urschel M Dicer

Model #: M
Item No: 16048-UD

  • 304 Stainless steel
  • Dicing unit consists of
  • Feed roll
  • Circular knives, driven by 7-1/2 Hp. 3/60/230/460 Volt, 1160 rpm motor, w/ Stearns brake
  • Mounted on a stainless steel frame with casters
  • New in 2003

(NEW) All Stainless Steel Bin/Tote Dumper

Item No: 15997-MSC

  • Configured for bins up to 45" wide by 48" long up to 52 5/8" high. Bin/tote holder measuring 53-1/2 wide by 48" long by 42" deep.

  • Manually adjustable hold-down bar settable from 28.5" to 53-1/2" bin height clearance.

  • Heavy duty tubular stainless frame construction, with dump action provided by hydraulic cylinders powered by a self-contained hydraulic power pack with reservoir and manual controls.

  • Set for 208-230/460 volt 3 phase electrical input (unless otherwise specified). System rated to 3,500 lbs weight capacity. Comes set for FLOOR LEVEL INFEED, with a 38" pivot point, and 40" dump height. 

  • All NEW construction.


Cornell 6" Hydro Food Pump

Model #: 6NHT-2R
Item No: 15952-PMP

  • Model: 6NHT-2R

  • 6" Inlet & Outlet

  • Pump Only



A.K. Robins Rotary Wash Reel 1983

Model #: 1983
Item No: 15901-MSC

  • 29" Dia. X 118" L
  • Perfs: .090"
  • Stainless steel construction

Custom Designed and Fabricated Drop Hopper

Item No: 15880-MSC

  • 43" x 43" x 48" Deep
  • Stainless Steel Construction
FMC Two Shell Rotary Pressure Cooker/Cooler

Item No: 15811-CK

  • Can size: 211-400
  • 5376 cooker capacity
  • 5376 Cool Capacity
  • New in 1993 with the cooker having a new shell in 2011

Lyco UBR Mid-size Reel Un-snip Remover

Item No: 15676-NIP

  • 30” Dia. x 60" L
  • Stainless Steel Construction


Custom Designed and Manufactured Tank

Item No: 15625-TNK

  • 60" H x 52" Dia.

  • Tank Capacity: Approx. 500 Gallons

Lyco Super Green Bean Snipper Reel

Model #: Super
Item No: 15610-MSC

  • 48" Dia. x 78" L
  • Lyco Super Green Bean Snipper Reel


Lyco Super Green Bean Snipper Reel

Model #: Super
Item No: 15604-MSC

  • 48" Dia. x 78" L
  • Lyco Super Green Bean Snipper Reel



Lyco Super Green Bean Snipper Reel

Model #: Super
Item No: 15601-MSC

  • 48" Dia. x 78" L
  • Lyco Super Green Bean Snipper Reel



Breddo Likwifier Liquifier

Item No: 15562-MSC

  • Overall: 44” x 44” x 81” Tall
  • Tank: 44” x 44” x 39” Tall
  • Motor: 40HP, 3Ph, 60Hz, 1765 RPM, 230/460 volts

Key Iso-Flo Vibratory Feeder S10224794

Model #: S10224794
Item No: 15433-VO

  • 24”W x 117"L

Zacmi 50 Pocket Filler 0275-50

Model #: 0275-50
Item No: 15382-FIL

  • Zacmi 50 Pocket Green Bean Filler
  • Model: 0275-50
  • Serial: 108802
  • Set: 300 x 407
  • Year: 2010
  • Drawing # 800003696

Vetter Screw Extracting Press

Item No: 15202-MSC

  • Features single 18" Stainless Steel screw tapering into 60" L screening area with heavy duty frame encasing fine screen
  • Mounted on twin I beams 17'6" L (overall) x 46" W x 54" H
  • Top mounted plate on gear reducer accepts 60 HP, 364 T frame at 1165 RPM (drive required)
  • 20" x 36" rectangular flanged In-feed hopper
  • Screen area features (4) full length spray pipes equally spaced for washing from single inlet manifold

 

Odenberg Flash Batch Steam Peeler

Item No: 15199-PLR

    • Includes 15" wide X 13' long cleated elevated belt infeed conveyor with a 36" x 36" 26" In-feed hopper at the base
    • Includes (1) 150 liter 304 type stainless steel flash steam vessel via a pneumatically powered lid

    • Steam vessel is coded for 250 PSI at 500˚ F

    • Includes 12" diameter x 9' long stainless steel screw/auger complete with expansion tank for steam discharge
    • 1 HP 3-phase eurodrive motor
    • All stainless steel construction

 

Elmar 28-Valve Piston Filler RP628

Model #: RP628
Item No: 14953-FIL

    • Stainless steel construction
    • Set for 250 ml rectangle shape container
    • Fill range: 8.5 fl oz min. 20 fl oz max.

 

Elmar 35 Piston Filler RP-35

Model #: RP-35
Item No: 14926-FIL

    • 1-3/4" diameter piston with approximate 9" stroke
    • Set on 211 diameter cans
    • Timing screw infeed and infeed star
    • Pneumatically operated no-call no-fill
    • Waukesha straight sided valves with 5/8" X 1" ports
    • Stainless steel base

 

Hydro Chiller 2DA3R89KE-TFD-C40

Model #: 2DA3R89KE-TFD-C40
Item No: 14866-MSC

    • Model: LTCG23TC
    • 22' L X 25" W
    • Equipped with white plastic interlox style belt
    • Stainless steel construction
    • Mueller plate chiller, condenser, and controls for chill water supply
    • Unit designed to maintain 33˚F process water
    • Copeland Discus freon compressor included
    • 3HP/460V/3PH/60HZ
    • Re-circulation pump and recovery tank included

 

Garoutte Belt Hydro-chiller & Garoutte Plate Chiller HO519-GL

Model #: HO519-GL
Item No: 14773-MSC

    • Belt size 40" W X 22' L
    • Interlox belt with Garoutte Freon stainless steel plate chiller
    • 3 Plates -- size: 36" H X 60" L
    • Stainless steel construction
    • Requires compressor and condenser

 

Key Iso-Flo Shaker 412970-1

Model #: 412970-1
Item No: 14653-MSC

  • Size: 18" W X 8' 6" L x 5" Deep
  • Stainless steel Construction

 

Key Iso-Flo Feed Shaker 90-01242-2 412958

Model #: 412958
Item No: 14650-MSC

  • Feed Pan Dimensions:: 5' 6" L X 9" W x 5" Deep
  • Max Stroke: 5
  • Stainless Steel Construction

 

Regal Pickle Spear Cutter

Item No: 14605-MSC

  • Regal Custom Design Pickle Spear Cutter
  • All Stainless Steel Construction
  • 1 HP 230-460 V
  • Automatically Slices Pickles Lengthwise Into Halves, Quarters, 5th and/or 6th Cut Depending on Desired Head
  • High-Speed Self-Adjusting Rubber Centering Rollers
  • Includes Banner Safety Package 

Magnuson 4 Roll Abrasive Peeler

Item No: 14557-PLR

    • Magnuson 4-Roller Abrasive Peeler
    • Stainless Steel Equipped with Hydraulic Power Pack

 

Federal Rotary 18 Valve Net Weight Filler F18 Series 720

Model #: F18 Series 720
Item No: 14419-FIL

    • 18 Valve Federal Weight Filler with:
    • Model F18 Series 720
    • 4.9 inch centers
    • 7 kg weigh cells
    • Speeds up to 90bpm
    • Last ran 8oz, 12oz, & 16oz plastic bottles
    • Stainless Steel Construction

 

Urschel CC-D Slicer

Model #: CC-D
Item No: 14386-MSC

    • Model: CC-D
    • 5 HP Motor
    • Stainless Steel Construction

 

Key Iso-Flo Shaker 412970-1

Model #: 412970-1
Item No: 14314-SHK

    • Size: 18" W X 9' 1/2" L
    • Stainless Steel Construction

 

Brown Paddle Finisher 4000

Model #: 4000
Item No: 14029-MSC

    • Model: 4000
    • Two paddles with 5/8" backing screen & .023 primary screen
    • Equipped with 10HP drive
    • All stainless steel construction

 

Odenberg Steam Peeler

Item No: 13876-PLR

    • 13" Stainless Steel Butterfly Vslve
    • Maximum PSI: 15
    • Capacity: 250 L
    • 500˚ F
    • NB #: 94
    • Equipped with 460 V, 1.5 HP, 3 PH motor
    • New in 1986

 

Urschel Slicing Wheel OV

Model #: OV
Item No: 13840-MSC

    • 17-knife capacity
    • Crinkle cutting knives

 

Urschel TRS Slicing Wheel

Item No: 13732-MSC

    • 18-knife capacity
    • Constructed with stainless steel

 

Urschel Dicer J

Model #: J
Item No: 13699-UD

    • 7 1/2 HP, 20.4/12.2 amp, 1730 RPM motor
    • Stainless steel contact parts
    • Constructed with stainless steel

 

Custom Design & Fabricated Overflow Briner

Item No: 13693-BBB

    • Custom Design & Fabricated Overflow Briner
    • 72" L Overflow
    • Stainless Steel Construction
    • Stainless Steel Contact Parts

 

Stainless Steel Accumulation Table

Item No: 13669-T

  • Stainless Steel Accumulation Table

FMC Granular Filler 21-G

Model #: 21-G
Item No: 13627-FIL

    • 3 HP, 230/460V, 1750 RPM, 3 PH, 60 Hz 8.2/4.1 amp Baldor motor
    • 1/3 HP, 230/460V, 1725 RPM, 3 PH, 60 Hz, 1/.5 amp duty master motor

 

Commercial Stainless Steel Air Cleaner

Item No: 13564-MSC

  • 36" W feed shaker w/ removable screen
  • 14" screen perforation
  • Equipped with 1 1/2 HP motor & Ajax shaker
  • 10 HP blower motor

 

Urschel Dicer H-X

Model #: H-X
Item No: 13492-ULI

    • 1-1/8" thickness maximum product in-feed
    • 1/2" crosscut spindle
    • Dice size set at 1"
    • Baldor 3PH, 3HP, 1725RPM, 60Hz, 230/460V, 8.6/4.3 amp motor
    • Constructed with stainless steel

 

Cornell Pump Co. 4" Food Pump 4NMPP-F5K

Model #: 4NMPP-F5K
Item No: 13468-PMP

    • 4" inlet and outlet
    • 24" W x  42" L x 18" deep stainless steel vortex
    • Equipped with 5 HP, 230 V, 60 Hz, 3Ph, 1740 RPM, 13.4/6.7 amp motor

 

G.J. Olney Washer 48 Flood

Model #: 48 Flood
Item No: 13435-WSH

    • Model #: 48 Flood
    • Equipped with Crane Deming Food Pump: 6-1/2" Inlet & Outlet
    • Product #: 4021 50710400
    • Includes Lincoln Electric 20 HP, 230/460 V, 1760 RPM, 60 Hz, 54/27 amp, 3 PH motor
    • Overall Dimensions: 84" W x 168" L x 96" H; Interior Dimensions: 48" W x 140" L x 47" H
    • Includes (2) Stainless Steel Screens
    • Screen Perforation: 3/16"
    • (1) Screen Measuring: 48" W x 27-1/2" L; (2) Screens Measuring: 48" W x 28-1/2" L
    • Includes (6) Rows of Overhead Spray Nozzles, totaling (32) Overhead Spray Nozzles;
    • Equipped with: RETURN RESERVOIR -- 6 1/2" Inlet & Outlet
    • 72" L x 90" W x 35" Diameter
    • Contains (3) Stainless Steel Screens at top of machine measuring 27 1/2" in the Middle section and 29 1/2" on both the Left and Right sections
    • Stainless Steel Construction

 

Urschel Dicer F

Model #: F
Item No: 13417-UD

    • Equipped with General Electric 2 HP, 3 Ph, 6.0/3.0 amp, 60Hz, 230/460V motor
    • Mild Steel Painted Frame

 

Cornell 10" Food Pump

Model #: 10NHPP-F12K PKG
Item No: 13357-PMP

  • Model: 10NHPP-F12K

  • Serial: 143342 21.00

  • Equipped with Baldor 3 Ph, 230/460 V, 96/48 amp, 40 HP, 60 Hz, 1765 RPM motor

FMC Continuous Rotary Sterilizer System

Item No: 13213-CK

    • 300 x 407 can size
    • Pre-heater with 924 can capacity
    • Pressure cooker with 3,192 can capacity
    • Atmospheric cooler with 2,604 can capacity shell

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13123-MSC

    • 17-knife capacity
    • Straight cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13111-MSC

    • 17-knife capacity
    • Straight cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13084-MSC

    • 17-knife capacity
    • Straight cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13051-MSC

    • 17-knife capacity
    • Crinkle cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13045-MSC

    • 17-knife capacity
    • Crinkle cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13039-MSC

    • 17-knife capacity
    • Crinkle cutting knives

 

Lyco Blancher Interior Reel

Item No: 13009-BL

  • Size: 48" W X 19' 6" L

  • Stainless Steel Shaft: 3" Diameter

  • Flight Spacing: 10"

  • Stainless Steel Spring Clamps

  • Stainless Steel Construction

  • No Perforated Screens


Carruthers Equipment Co. Spiral CrossCut Slicer 5100D

Model #: 5100D
Item No: 12958-ULI

    • Model: 5100
    • 3 Position Selector Switches for Slice Thickness
    • Includes Soft Tooth Blue Belt
    • Equipped with (1) SM-CYCLO 2HP, 1740 RPM, 60 Hz, 6 amp motor & (1) SM-CYCLO 1/4HP, 230 V, 60 Hz, 1730 RPM, 1.1 amp motor
    • New in 2003
    • Stainless Steel Contact Parts

 

Sani-Matic Tunnel Washer R-D5-RR1-FR1

Model #: R-D5-RR1-FR1
Item No: 12955-WSH

    • Model: R-D5-RR1-FR1
    • Capacity: Sizes up to 18" x 24" x 28" L
    • Overall Dimensions: 86.5" H x 64" W
    • 3 Individual Cleaning Sections:
    • 1 - Recirculated Detergent Section,with (5) Spray Rings
    • 2 - Recirculated Rinse Section with (1) Spray Ring
    • 3 - Final Rinse Section with (1) Spray Ring; Equipped with 230/460 V, 3525 RPM, 60 Hz, 1.15 amp motor
    • Used for Moderate Soil Conditions Including: Wet Carbohydrates, Dried Liquids with Suspended and Dissolved Solids, Fats & Oils, Wet & Semi-Dry Fruit

 

Reconditioned Shufflo Grovedale Feeder

Item No: 12925-CTR

    • Stainless Steel Construction

 

Allen French Style Bean Feeder

Item No: 12883-MSC

    • Stainless steel contact parts
    • Mild steel frame

 

Urschel French Style Bean Cutter W

Model #: W
Item No: 12880-CTR

For 3-in. or longer blanched, round, or flat pod beans
Equipped with infeed shaker

Urschel French Style Bean Cutter W

Model #: W
Item No: 12874-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel French Style Bean Cutter W

Model #: W
Item No: 12871-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel French Style Bean Cutter W

Model #: W
Item No: 12868-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel Green Bean Cutter W

Model #: W
Item No: 12742-UD

    • Equipped with Allen feed shaker
    • Mild steel painted frame

 

Key Iso-Flo Feed Shaker 602594-1

Model #: 602594-1
Item No: 12709-SHK

  • Key Iso-Flo Cup Up Shaker
  • Model #: 602594-1
  • Serial #: 02-78429
  • Mild steel painted frame
  • Constructed with stainless steel


Commercial Dewatering Shaker

Item No: 12697-SHK

    • 48" W x 10' L x 60" H
    • Constructed with stainless steel

 


Key Deck Grader

Item No: 12688-GR

    • 48-in. wide and 7-ft. long top deck
    • 48-in. wide and 8-ft. long bottom deck
    • Equipped with Ajax shaker
    • Stainless steel shaker pan and mild steel painted frame

 

GME Hydrocutter

Item No: 12664-MSC

    • Model #: Switcher
    • 8" Diameter Inlet & (2) 4" Diameter Outlets
    • New in 1995

 

Groen Steam Jacketed Tilt Kettle DT-10-SP

Model #: DT-10-SP
Item No: 12553-KT

    • 10 gallon capacity
    • Year: 1973

 

Diamond Stainless Steel Pork Depositor D-105-RD

Model #: D-105-RD
Item No: 12544-MSC

    • Set to 603 can diameter
    • Equipped with Eurodrives on cutter and can feed
    • Central lube system

 

Custom Overflow Briner

Item No: 12415-MSC

    • Set: 211 Diameter Can
    • Overall Length: 16'
    • Stainless Steel Construction

 

Fairbanks Morse Cornell Type Water Pump

Item No: 12388-PMP

    • 5" Inlet and 4" Outlet
    • 450 GPM capacity
    • Equipped with 230/460 V, 10 HP, 1725 RPM motor
    • Thrush BF-104 Casting

 



FMC Vibratory Feed Shaker

Item No: 12376-SHK

    • 30" W x 6' L pan
    • Positive drive shaker
    • Dimpled shaker pan
    • Constructed with stainless steel

 


Arpac Bundler & Tunnel 105-28

Model #: 105-28
Item No: 12343-PAK

    • Model: 105-28
    • Seal Bar Opening: 9 3/4" Fully Extended
    • Includes Allen-Bradley Model: SLC 5/01 CPU

 

Custom Designed & Fabricated Inline Briner

Item No: 12304-MSC

    • Stainless Steel Inline Briner
    • Set: 211 dia.
    • Overall Length: 21'
    • Briner Tank Length: 118"
    • Variable Speed Timing Screw In-feed
    • Stainless Steel Construction
    • No Tag
    • No Can Chain

 

A. K. Robins Inline Briner

Item No: 12301-MSC

    • Set to 401 diameter
    • Overall Length: 13'
    • Timing screw in-feed
    • Constructed with stainless steel

 

Hobart Chopper HCM-450

Model #: HCM-450
Item No: 12271-CTR

    • 45 QT capacity
    • Equipped with 5HP, 230/460V, 3 Ph motor

 

Custom Stainless Steel Steam Jacketed Kettle

Item No: 12046-KT

    • Steam Jacketed Kettle
    • 54" Dia. x 39" Deep
    • No Tag
    • Stainless Steel Construction

 

Groen INA Kettle

Model #: INA-300-SP
Item No: 12019-KT

  • Groen INA Kettle

  • Model: INA-300-SP

  • N.B.#: 42564

  • Max. Working Pressure: 45 PSI @ 300˚F

  • Single Motion Scrape

Mueller Horizontal Tank 1000 Gallon Horizontal

Model #: 1000 Gallon Horizontal
Item No: 11974-TNK

  • All Stainless steel construction
  • 58" Dia. x 122" L
  • Maximum Vessel Working Pressure: 44 PSI
  • Maximum Vessel Temperature: 250˚ F
  • Top man-way


Hobart Cutter/Mixer VCM25

Model #: VCM25
Item No: 11728-CTR


  • Equipped with 208V motor

Muller Automatic Pallet Wrapper EGA

Model #: EGA
Item No: 11707-PAK

    • Model #: EGA
    • Includes In-feed Conveyor, Pallet Spinner, Shuttle Conveyor, Scissor Lift & Conveyor
    • Equipped with 240 V, 3 PH, 60 Hz motor
    • Overall Length: 27' L x 54" W Conveyor

 

Hughes Green Bean Grader

Item No: 11701-GR


  • Constructed with stainless steel

Custom Designed & Manufactured Feeder Bin

Item No: 11695-MSC

  • 32" Dia. x 8' L
  • Constructed with stainless steel

 

Hytrol Roller Conveyor Drive Section

Item No: 11530-VO

    • Dimensions: 120" L x 12" W
    • 1 HP brake motor
    • New, never used
    • MFG in 2004

 


Kramer-Grebe Vacuum Bowl Chopper

Item No: 11059-BC

    • 48" Dia. x 6' L
    • Constructed with stainless steel

 

Kronen Spinner

Model #: 8600
Item No: 10957-SPN

    • Model: K-50-100 S
    • New: 2004
    • Equipped with 230 V, Single Phase, 50/60 Hz motor

 

CRCO 3 Deck Nubbin Grader

Item No: 10606-GR

    • 5/8-in top deck, 1/2-in. middle deck and 3/8-in. bottom deck perforations
    • Grade out green beans
    • Stainless steel contacts
    • Mild steel painted frame

 

FMC Tomato Chopper

Item No: 10444-MSC

  • FMC Tomato Chopper

  • No Motor or Pump


I&H Spray Cooler

Item No: 10225-MSC

    • 8' W x 50' L single deck
    • Intralox plastic mat belt
    • Overhead water sprays with in-feed and discharge bottle conveyors
    • Air blower at discharge end with 4 water re-circulation pumps

 

Wolverine Jet Zone Fluid Bed Dryer

Item No: 10222-DR

    • 2,000 lb. capacity per hour
    • 5' W x 20' L
    • 2 zones w/ gas valves and separate cooling conveyor
    • Controls and bag house mounted outside building

 

Kramer-Grebe Bowl Chopper 300

Model #: 300
Item No: 09775-MSC

    • 2-speed bowl
    • Stainless steel bowl

 

Hydro Chiller 30' L x 12' H x 5' W

Model #: 30' L x 12' H x 5' W
Item No: 09577-CHW

    • Dimensions: Overall 30' L x 12' H x 5' W
    • Drive: chain with paddles, 2 HP motor with 2.70 gear box
    • Capacity: 3 standard 40 x 48 with product height up to 7'
    • Chain conveyor moves either direction with proximity switches
    • Catch pan is galvanized steel, drains into screened filter cage, then is pumped back to chiller coil
    • Chiller coil: water chilled to 36º F, coil is located in bottom of recaptured reservoir
    • Spray bar: (4) 4" PVC pipes with holes provide water spray to product
    • Pallets are introduced at one end, where advanced under spray bar and deluged with chilled water until target temperature is reached
    • Chiller and pumps are not included

 

Busse Unloader B5-C

Model #: B5-C
Item No: 09556-MSC

    • 6" W stainless steel table top chains
    • Single filing table
    • Equipped with power sweep and standard base mounted hydraulic power pack
    • 230/460V, 3 PH drive motor

 

Holac Dicer VA-120N

Model #: VA-120N
Item No: 08263-UD

  • 1/2" x 1/2" grid size
  • Hopper Dimensions: 4-1/2" W x 4-1/2" H x 28" L
  • Constructed with stainless steel

 

Biner-Ellison 12-Valve Gallon Filler

Item No: 01453-FIL

    • 1 gallon capacity plastic containers
    • 12 valve @ 5/8" Filabelmatic
    • Top drive, 1 HP tri-clover feed pump
    • Stainless steel contacts

 


Busse Horizontal Manual Loader LBH

Model #: LBH
Item No: 00284-LOD

    • Floor piston jack

 

Busse Vertical Retort Power Loader PL

Model #: PL
Item No: 00271-LOD

    • For round baskets

 

Markets Served
Need help?

Not finding what you're looking for?

Have a question?

We'd love to hear from you!

Contact Us

or call 1-234-206-2882

Weekly Inventory Updates
Subscribe to our Newsletter
Latest Blog Post