22132-KT
BCast 200 Gallon 365 Gallon Capacity) Jacketed
Cook and Cool Tank in accordance with the
following specifications:
INNER SHELL:4mm, T-316 stainless steel
INNER BOTTOM:4 mm, T-316 s/s, conical
with 120° included angle
TOP COVERS: 3mm gauge, T-316 s/s, two-piece
hinged covers with handles and latch, mounted
from the center bridge
INSULATION: Full sidewall and bottom head will
be insulated with chloride free mineral fiber
insulation.
OUTER SHELL: 3 mm gauge, T-304 s/s
OUTER BOTTOM: 3 mm gauge, T-304 s/s, Conical
with 120° included angle
SUPPORTS: (4) 4” pipe legs with adjustable ball
feet, T-304 s/s. Leg will mount to inner cone bottom
and extend through outer bottom skin.
OUTLET: Flange for flush mount valve 3" , 21"to
floor. less valve height Valve will be supplied by
Bcast.
THERMOWELL: (1) Pyromation tank adapter
flush mount
DIMENSIONS: 72” ID x 74” OD x 16” straight
sidewall height x 84” approx. overall height
HEAT TRANSFER SURFACE: The full bottom
head will be supplied with 2 mm gauge, T-304 s/s
dimpled heat transfer surface with (1) 2” inlet and
(1) 2” outlet threaded pipe nipple connection and
supplied with directional baffling. Connections
-code stamped heat transfer jacket for use at 75 PSI.
BRIDGE: T-316L s/s center bridge for supporting
of agitator
BAFFLE: (1) internal adjustable baffle, T-316L s/s.
AGITATOR: Top entry dual motion
counter-rotating agitator with bottom scrape driven
by 5 HP right angle helical bevel gear motor
operating at 23 RPM. Motor will be 230-460/3/60
washdown (less starter) inverter duty. Scraper
blades will be included.
Counter-rotating tri blade impellers 3 hp. gear motor
operating at 90 RPM. Motor will be 230-460/3/60
washdown (less starter) inverter rated. Shaft will be
equipped with removable tri blade impeller
assembly.
Quick change scraper blade sleeve included.
Shaft will be through a neoprene slinger and the
lower shaft will be supported by a bottom steady
bearing with 6/6 nylon inserts and Viton elastomer.
TANK RATING: Tank is designed for 75 psi @
325° F. Heat Transfer Surface is designed, tested,
fabricated 75 PSI rating.
Heat transfer surface will include ASME registration
U1 Cert and national board listing..
MATERIAL FINISH: All interior surfaces will be
polished to a #4 150-grit sanitary finish. #4 exterior
WELD FINISH: All interior and exterior welds will
be ground smooth and ribbon polished
OPERATING HEIGHT TO RIM SHOULD BE 64".
stainless package includes c-face adaptors to mount
Stainless steel washdown duty motors, and stainless
steel gear box to bridge mounting flange.
Latch handle release and long handle lid lift rods.
RIG cross bar to run opposite of Bridge direction.
Exterior Shell to have Screened leak detect port in
the low point of cone.
Cooker cooler Hi temp blade (275 F.) adder