COVID-19 RESPONSE: Regal Equipment remains open and has put additional sanitation protocols in place to ensure the highest quality of service to our customers. We have put in place measures to protect our employees and their families and are following all Health Department and CDC recommendations. We are answering all calls and requests. Please let us know how we can help.

Used Beverage Processing Equipment

The beverage industry is vast, and it covers beer, soft drinks, and aseptic juice processing, to name a few. Manufacturers depend on durable and cost-effective processing machines that meet industry sanitation and quality standards for beverage production and development. Equipment involved in beverage manufacturing include blenders, carbonators, de-aerators, mixers, and refrigeration systems.

Regal Equipment offers used and reconditioned beverage processing equipment that caters to beverage manufacturers' needs. To learn more about a specific unit, click on the product name below.

Types of Beverage Processing Machines

Beverage Storage Tanks: The beverage industry requires storage tanks capable of storing large volumes of beverages, such as beer and wine. These tanks must be able to withstand the high pressures generated by these products during filling operations. In addition, they should have good corrosion resistance to prevent contamination of stored beverages.

Agitators: A beverage processing agitator consists of a rotating shaft with blades attached to one end, then pulled through the liquid to agitate the contents. The rotation speed can be used to create particular effects such as aeration, froth, smoothness, or even the production of foam.

Blenders: Beverage processing blenders are machines that use rotating blades to chop or grind raw materials into smaller pieces. The ground-up food particles are then mixed with air and other liquids, creating a slurry. This slurry is then poured through a strainer to remove any solids, and the fluid is collected as a finished beverage product.

Beverage Mixing Tanks: Mixing vessels are an essential part of the beverage process by creating a final quality product. Mixing tanks follow sanitation and efficiency standards to ensure your product is free of any possible contamination.

Used Beverage Processing Equipment

LANTECH QM Pallet Strech Wrapper Machine

Model #: QM
Item No: 22737-PAK


Turn table is 65" diameter.

Mast is 119" tall from base to top of wrapper 

Mild steel Painted Construction 

120 Volt Electrical, 1 Phase

Some missing plastic side covers on mast

Lecrow Vegetable Drier

Item No: 22677-MSC

5 Stainless steel spinner baskets 21"D X 24" Diam. with 1/4" holes

230-460 Volt, 3PH 

4 Brute Liners

Viatec Process/Storage Systems 326 Gallon Kettle

Model #: 326
Item No: 22668-TK

National Board Serial Number 6459

Shell Thick .159, Head Thick .159

Jacket 140PSI 360F

With Agitation  

Votator 21 Valve Piston Filler

Model #: 21 Station
Item No: 22650-FIL

21 Station Piston Filler 

Right Hand Infeed Left Hand Discharge Timing Screw Infeed

Last filling 10 oz. can, can size 211 Dia..

Stainless Steel Contact and Hopper, Mild steel painted base.

No Controls or Filler seamer Drive included 

50 Gallon Custom Stainless Steel Mix Tank With Agitation

Model #: 50 Gallon
Item No: 22584-KT

Tank Dimensions: 26" Dia. x 24" Deep. Approximately 50 gallon usable capacity.

SEW-Eurodrive Motor and Gearbox  Type: 85004807.13.13001

Single Motion Agitation with side and bottom nylon scrapers (scraper blades are removable). 2 Fixed agitators to assist with agitation (Removable through kettle mount).

Half lid with locking hinges and handle.  Equipped with Prox sensor for safety. 

Left hand side of lid has a 1" Tri-Clamp Sanitary Inlet.

2" LEE KETTLE Valve at bottom of tank outlet.

Stainless Steel Electrical Enclosure: 120 Volt, 1 Phase, 60 Hz.  Precision Digital temp controller, Stop, Start, and speed pot controls for agitator.  Allen-Bradley VFD Cat # 22A-V6P0N104 Series A 1.5 Hp.

Last used is a Food Processing R&D.

SPE TECH AG Gigh Pressure Pump Skid

Model #: 14-7002
Item No: 22581-KT

Mobile High Pressure Pump Skid

LEWA 3-Stage High Pressure Pump Type LDB3

Endress + Hauser Flow Meter PROMASS 83

Stainless Steel Electrical Cabinet with VFD 

Stainless Steel Tank Size: 17" Dia. x 17" Deep Insulated Stainless Steel Clad. Stainless Steel Removable Lid.

Mounted on common mobile stainless steel skid with plastic casters.

Electrical Requirements: 400 Volt, 16 Amps, 50 Hz.

Premier Tech Chronos/ Von Gal Pallet Dispenser

Model #: Vol Gal Pallet Dispenser
Item No: 22572-PAK

Chain style pallet feed handling conveyor.

Last running CHEP style pallets.

Allen Bradley controls with AB Panel View 700 Display 

480 Volt 3 Phase 60 Hz 

SureKap Inline 6 Chuck Capper

Model #: SKC4510
Item No: 22569-CAP


Tri-Berry Stationary Product/Waste Waster Dewatering Screen

Model #: 60" Wide
Item No: 22554-MSC

Stainless steel wedge wire screen.

Screen size is .060"

Lyco Mfg. Stationary Product/Waste Water Dewatering Screens

Model #: 24" Wide Screen
Item No: 22470-MSC

Equipped with stainless steel wedge wire screen.  

Screen Size .125" 

Lyco Mfg. Stationary Product/Waste Water Dewatering Screens

Model #: 36" Wide Screen
Item No: 22464-MSC

Equipped with stainless steel wedge wire screen.  

Screen Size .125" 


Lyco Mfg. Stationary Product/Waste Water Dewatering Screens

Model #: 24" Screen
Item No: 22461-MSC

Equipped with stainless steel wedge wire screen.  

Screen Size .125" 

Lyco Mfg. Stationary Product/Waste Water Dewatering Screens

Model #: 24" Screen
Item No: 22458-MSC

Equipped with stainless steel wedge wire screen.  

Screen Size .125" 


Lyco Mfg. Stationary Product/Waste Water Dewatering Screens

Model #: 24" Wide Screen
Item No: 22455-MSC

Equipped with stainless steel wedge wire screen.  

Screen Size .125" 

Lyco Mfg. Stationary Product/Waste Water Dewatering Screens

Model #: 24" Wide Screen
Item No: 22449-MSC

Equipped with stainless steel wedge wire screen.  

Screen Size .125" 

Hinds-Bock Single Piston Filler

Model #: SP-16T
Item No: 22431-FIL

Single Piston Fill

Stainless Steel Removable Hopper

Pneumatic Operation with Foot Pedal Control 

Sanitary Design Simple Operation 

Anlagenbau Ag. Jacketed Kettle

Model #: 66 Gallons
Item No: 22428-KT

66 Gallon Capacity 

Scrap surface agitation, with replicable plastic blades 

Kettle valve and 2 temp problem ports at bottom of kettle

PLC Controls with HMI display 460 Volt 

Mounted on common skid with steam controls valves and plumbing 

Has half lid with viewing port and locking latches 

Rheon KN400 Encrusting Machine

Model #: FDSCR-24
Item No: 22347-BAK

  Rheon Automatic Machinery KN400 Cornucopia encrusting machine.  Machine was manufactured in 1998 was used last in a R&D operation to form dough balls.  Serial # 261, 220 Volt, 60 Hz., 1 Phase, 13.3 Amps. Capable of 10-60 pieces of formed product per. minute depending on product and feed.    

Schenck Process Systems MechaTron Ingredient Feeding System

Model #: V562680.BO1, V562679.B01, V562683.B01
Item No: 22344-MSC

System includes 2 Low Range feeders and a Mid Range feeder capable of feeding 330 Cubic feet per hour.

These feeders are easily able to be disassembled for maintenance and cleaning fully washdown.  

Equipped with a Conical hopper witch agitation to assist in product flow.

Allen Bradley PLC with Allen Bradley HMI Controls.

System was new is 2013 was last used in a R&D application feeding flour products.

JC Pardo Kettle With Agitation 100 Gallon Capacity

Model #: 100 Gallon
Item No: 22335-KT

Approximately 100 gallon capacity.

Agitation is Pardo side mounted, with Scrapers.

Steam jacketed 100 PSI @ 338 Degrees Fahrenheit

Manual lifting lid equipped with safety switch

Steam control valves and safety valve included on common skid with casters

Sentry High Level Bulk Depalletizer

Model #: Automatic Bulk Depallitizer
Item No: 22332-PAK

Sentry High Level Bulk Depalletizer with Accumulation Table and Discharge Conveyors

 Manufacturer: Sentry Equipment & Erectors, Forest Virginia - Container Discharge Elevation 12’6” - Fully Automatic Operation - Automatic Tier Sheet Remover   - Automatic Pallet Stacker - 16’ Long Accumulation Table with 48” Wide Plastic Mattop Belting - Includes Single Filer Conveyors. Electrical Upgrade 2011.
Whallon High Speed Bright Can Palletizer

Item No: 22320-MH

PD Series 90 degree swing, with magnetic head for palletizing and depalletizing metal containers.  

Unit has pallet stacker/dispenser with pallet handing conveyor, automatic slip sheet handling feature, and slip sleet dispenser.  

Burt 408-D Hydraulic Through Labeler

Model #: 408-D MK V
Item No: 22314-PAK

Pneumatic Scale Angelus Burt Horizontal Roll Through Hydraulic Can Labeling Machine.  Last running a tin can full wrap paper label.  Machine is equipped with Valco glue system.  

Las running a 3 piece Tin can.

Model 408-D

Rietz/Bepex Dual Ribbon Blender

Model #: RSV10K64024
Item No: 22278-MIX


Anets Dough Roller

Model #: NDR-6-SNB
Item No: 22266-MSC

24" Wide Belt 

115 Volt 1Ph 10 Amps

Stainless steel base with locking casters.

PSI Pizza Systems Inc. Pizza Press

Model #: PSI75
Item No: 22263-MSC

11 7/8" Round Pizza Die.Part # 93J907

220 Volt 1Ph 30 Amp

Semi Automatic Controls 

FMC M&S Piston Filler

Model #: M&S Piston Filler
Item No: 22260-FIl

Set 300 x 407 Dia. tin can.

20 Station 

Straight line infeed with timing screw 

14oz Fill Volume 

Angelus 59-P Seamer

Model #: 50-P
Item No: 22257-SEM

Set 1 gallon # 10  603 X 700 Dia. tin can.

Straight line infeed w/ steam flow 

Equipped with rotary marker

Parts Machine 

FMC 21-G Pocket Filler

Model #: No Tag
Item No: 22251-FIL

Set 300 x 407 DIa. Tin Can, height can be adjusted.

21 Station Pocket filler works well with products that have granular or particulate properties 

Pocket size is 4" Dia. x 2 1/2" Deep

Stainless steel contact, mild steel base

Straight infeed with timing screw 

Missing top pan, side frame support, and drive hub housing.

FMC C910 9 Station Piston Filler

Model #: C910M5S Filler
Item No: 22245-FIL

Set 1 gallon pack  #10 603. x 700 DIa. tin can.

Port size 1.5"

Timing screw infeed 

Stainless steel construction 

FMC Type 18 Pocket Filler

Model #: No Tag
Item No: 22242-FIl

18 Station Pocket filler works well with products that have granular or particulate properties 

Pocket size is2 7/16" Dia. x 4" Deep

Stainless steel contact, mild steel base

Straight infeed with timing screw 

FMC Type 12 Pocket Filler

Model #: No Tag
Item No: 22239-FIL

12 Station Pocket filler works well with products that have granular or particulate properties 

Pocket size is 5 3/8" Dia. x 8 1/2" Deep

Stainless steel contact, mild steel base

Straight infeed with timing screw 

Mettler Toledo Checkmate 2 Hi-Speed Checkweigher Systems

Model #: CM00GI-CM
Item No: 22233-MH

#10 603 diameter can high speed check weigher 

Gripping feed belts with approximately 6" fixed spacing

Stainless steel control cabinet with Check Mate 2 controls 

Mild steel pained conveyor frame 

Will need new set of can carrier chains over weigh cell (See Photos)

10" L X 4.5" W Scale Zone 

VEMAG

Model #: Robot HP 15 C
Item No: 22230-MSC


Viatec Process Storage Systems Stainless Mix/Holding Tank

Model #: 326 Gal.
Item No: 22224-TNK

Stainless Steel Holding Tank with Jacket 

Scrap Surface Agitation with center Prop Agitation 

NAB # 6459

Mepaco 4000lb. Dual Ribbon Blender

Model #: No Tag
Item No: 22218-MIX

Dual mixing ribbons stainless steel 23" Dia. 

Discharge is dual doors with pneumatic controls

Tub size 7' L X 57" W X 32" Deep

Dual electric motors with 10Hp gear reducing drives 

Safety grates covering top of blender 

Key Technologies Vibratory Conveyor

Model #: 419629-1
Item No: 22209-SHK


VEMAG 400 LB. Carts

Item No: 22188-CK

Capacity: 440lbs.

Overall Height: 27.5"

Overall Width: 26.5"

Weight: 93lbs.

Construction: 14 GA Stainless Steel with polished exterior and interior

Rolled Reinforced Lip

Reinforced Bucket Bottom

Heavy Duty Casters

Heavy Duty Stainless Steel Caster Brackets

USDA Accepted

Drain Hole with Plug

ADMIX DynaShear EmulsifyingPump

Model #: DS-575
Item No: 22179-PMP

3" In, 4" Out

Stainless steel emulsifying pump

Serial # 56945-1

DS-575

Date of Mfg. 01/23/18

20HP electric motor

230/460 volts

46/23 amps

3520 RPM

60 HZ

3 Phase

Elmar Piston Filler 36 Station

Model #: RPE- 536 1 LH
Item No: 22146-SEM

Elmar Piston Filler 36 Station

Model # RPE-536 1 LH

Serial # EMS2-9210

Manufactured Date: 1992

Currently Set: 14oz. 300 X 407 Dia. 

Douglas Tray Former Packer and Shrink Tunnel System

Item No: 22143-PAK

Douglas Machine Inc. Tray Former, Packer, Wrapper, and Shrink Tunnel System 

Currently running a 8oz. tin can  24 pack 6 x 4 Pattern

Shrink Wrapper M-4415

Shrink Tunnel M-4415

Infeed Assembly and Tray Packer M-1759

Wrapper and Tunnel where Mfg. 2012 Infeed and Tray packer Mfg. 1987

BCast 200 Gallon Kettle

Item No: 22132-KT

BCast 200 Gallon 365 Gallon Capacity) Jacketed

Cook and Cool Tank in accordance with the

following specifications:

INNER SHELL:4mm, T-316 stainless steel

INNER BOTTOM:4 mm, T-316 s/s, conical

with 120° included angle

TOP COVERS: 3mm gauge, T-316 s/s, two-piece

hinged covers with handles and latch, mounted

from the center bridge

INSULATION: Full sidewall and bottom head will

be insulated with chloride free mineral fiber

insulation.

OUTER SHELL: 3 mm gauge, T-304 s/s

OUTER BOTTOM: 3 mm gauge, T-304 s/s, Conical

with 120° included angle

SUPPORTS: (4) 4” pipe legs with adjustable ball

feet, T-304 s/s. Leg will mount to inner cone bottom

and extend through outer bottom skin.

OUTLET: Flange for flush mount valve 3" , 21"to

floor. less valve height Valve will be supplied by

Bcast.

THERMOWELL: (1) Pyromation tank adapter

flush mount

DIMENSIONS: 72” ID x 74” OD x 16” straight

sidewall height x 84” approx. overall height

HEAT TRANSFER SURFACE: The full bottom

head will be supplied with 2 mm gauge, T-304 s/s

dimpled heat transfer surface with (1) 2” inlet and

(1) 2” outlet threaded pipe nipple connection and

supplied with directional baffling. Connections

-code stamped heat transfer jacket for use at 75 PSI.

BRIDGE: T-316L s/s center bridge for supporting

of agitator

BAFFLE: (1) internal adjustable baffle, T-316L s/s.

AGITATOR: Top entry dual motion

counter-rotating agitator with bottom scrape driven

by 5 HP right angle helical bevel gear motor

operating at 23 RPM. Motor will be 230-460/3/60

washdown (less starter) inverter duty. Scraper

blades will be included.

Counter-rotating tri blade impellers 3 hp. gear motor

operating at 90 RPM. Motor will be 230-460/3/60

washdown (less starter) inverter rated. Shaft will be

equipped with removable tri blade impeller

assembly.

Quick change scraper blade sleeve included.

Shaft will be through a neoprene slinger and the

lower shaft will be supported by a bottom steady

bearing with 6/6 nylon inserts and Viton elastomer.

TANK RATING: Tank is designed for 75 psi @

325° F. Heat Transfer Surface is designed, tested,

fabricated 75 PSI rating.

Heat transfer surface will include ASME registration

U1 Cert and national board listing..

MATERIAL FINISH: All interior surfaces will be

polished to a #4 150-grit sanitary finish. #4 exterior

WELD FINISH: All interior and exterior welds will

be ground smooth and ribbon polished

OPERATING HEIGHT TO RIM SHOULD BE 64".

stainless package includes c-face adaptors to mount

Stainless steel washdown duty motors, and stainless

steel gear box to bridge mounting flange.

Latch handle release and long handle lid lift rods.

RIG cross bar to run opposite of Bridge direction.

Exterior Shell to have Screened leak detect port in

the low point of cone. 

Cooker cooler Hi temp blade (275 F.) adder

APV Gaulin Homogenizer 15MR-8TA

Model #: 15MR-8TA
Item No: 22018-MSC

- 2 Stage manual valve assembly

- 8,000 PSI ball valve cylinder with max pressure of 10,000 PSI

- 15 GPH

- 1 Gallon supply hopper

- 3 HP motor

- 208 - 230/460 Volt

- On stainless steel frame casters

Key Dewatering Shaker

Item No: 21997-SHK

- All stainless steel construction

- 48" wide x 20' long screening deck

- Flat rod screen in perpendicular orientation to the product flow

- 1/8" rod sieves

- Removable screen design with quick release clamps

- Full length bottom collection pan with 8" drain

- Presently equipped with an extensive overhead spray bar system which

  delivered approximately 900 GPM. (Pump not included)

- Iso-Flo Eccentric and 3 Phase drive motor

- Unit is supplied with spring mounts, but LESS Support legs  

Lyco Double Drum Screener

Item No: 21976-MSC

48"Diam. X 72"L

MFG: 2009

Stainless Steel

Includes Stainless steel dewatering discharge screw 6" X 25' with hopper

LYCO Warhorse Peeler /Washer

Model #: 11900 Warhorse Peeler
Item No: 21931-PLR

LYCO Warhorse Peeler / Washer

Model: 11900 Hydraulic War Horse

9 Brush Rolls

Serial: P-0718-874151

Hydraulic Power Pack 20 HP. 230/460

Year : 2018

Stainless Steel Construction

Fanuc Case Palletizing Robot M-420iA

Item No: 20788-RB

Type: A05B-1040-B201, NO: R03X42235, MFG: 2003

Fanuc Case Palletizing Robot M-420iA

Item No: 20785-RB

Type: A05B-1040-B201, NO: R03X42236, MFG: 2003

Fanuc Palletizing Robot M-420iA

Item No: 20776-RB

Type: A05B-1040-B201, NO: R02942112, MFG: 2002

Lot (2) Matthews Marking Products Case Coder

Item No: 20743-RB

I-Mark V84 Ez Touch Ink Jet Case Coder  

Kisters Tray Pack Wrapper, Bundler and Tunnel

Item No: 20740-RB

SN: 851080,MN: 97180, MFG: 1985

K2 Engineering Group 24 Station Labeler

Item No: 20731-RB

Allen Bradley Logix5571 Controls, Set 300 X 400, Project Number: 1734.03 (11-00-0372) Bay Valley Foods

FMC/Simplimatic Model 400HD Brite Can Depalletizer

Model #: 400-MD
Item No: 20716-RB

MN: 400-HD, SN: N2415-0395-498, with Pallet Infeed and Stacker, Allen Bradly SLC50-3  

Lot (2) Matthews Marking Products Case Coder

Item No: 20707-RB

I-Mark EZ Touch V84, Case Coder

Lot (2) Matthews Marking Products Case Coder

Item No: 20680-RB

I-Mark EZ Touch V84, Case Coder

Matthews Marking Products Case Coder

Item No: 20605-RB

I-Mark V84 Ez Touch Ink Jet Case Coder

Matthews Marking Products Case Coder

Item No: 20584-RB

I-Mark V84 Ez Touch Ink Jet Case Coder

Peco VAC-TRAC II Dud Detector

Item No: 20536-RB

Pressure Monitor Dud Detector With High Speed Ejectors

Krones Solomodul 35 Station Labler

Item No: 20503-RB

MN: Solomodul II-, Equipment K406397, MFG: 2017, With Krones Checkmat 731, SN: K731CCF, Krones Table Top Conveyor 3.5"W X 25' Approx., Control Cabinet, Spare Parts Shelf, 2 Component Pressure Sensitive Label for Set 4 Oz, Change Parts for 4.5 Oz, 5 Oz  

Key V-Shape Hopper with Metering Valve

Item No: 20367-RB

 Hopper 5'W X 5'L X 3'Deep, Metering Pockets 12"L X 3.5"Deep

APV Gaulin Homogenizer

Item No: 20359-RB

MN: 1500 MS18-25TPS, 2500 psi, SN: 69312282  

Wolfking Stainless Steel Dual Shaft Paddle Blender

Model #: TSM-1500
Item No: 20287-RB

56"L X 60"W X 39"D, Dual End Discharge, No Tag

Wolfking Stainless Steel Dual Shaft Paddle Blender

Model #: TSM-1500
Item No: 20284-BL

56"L X 60"W X 39"D, Dual End Discharge, No Tag

MTC Stainless Steel Tote Dumper

Item No: 20032-RBX

Materials Transportation Company, MN: LEC, SN: 1140323, Cap. 3,000 Lbs., Overall 63"W X 124"T X 64"Deep, Hydraulic Operated

Walker Single Wall Stainless Steel Tank

Item No: 20023-RB

SN: 6283, Cap. 900 Gal., MN: Hold, MFG:1991, 304 SS., DRG: SP-19340-D, Tank Number T60B02, Tank 4'T X 5.5'Dia., Overall Height Approx. 13', Cone Bottom with 4" Center Discharge, Dome Top with Manway Style Entrance, Center Prop Agitation with Baffle  

Walker Single Wall Stainless Steel Tank

Item No: 19954-RB

SN: 6282, Cap. 900 Gal., MFG: 1991, MN: Hold, 304 SS, DRG- SP-19340-D, NB: 2314, Dome top, Cone Bottom, Manway Style Entrance, 3" Center Outlet, 52"T X 60"Dia., Overall Height Approx. 13', Sweep Agitation with Baffle, Tank Number: T60A02   

Walker Single Wall Stainless Steel Tank

Item No: 19900-RB

SN: 6286, 800 Gal., MN: Hold, MFG: 1991, 304 SS, DRG: SP-19340-D, 4" Outlet, 70"Dia. X 50"T, Overall Height Approx. 14'T, Dome Top, Manway Style Entrance, Sweep Agitation  

White Cap Steam Capper

Model #: VE
Item No: 19456-RB

Baby Food Caps  

Walkin Freezer

Item No: 19384-RB

18'W X 20'D X 8' T, Chase Doors Cold Guard MD: SSW, SN: 386618-3, Chiller is MN: LED 189B, SN ED18925 002, Refrigerant R-404A, Door 5'W X 7'T  

Robot Coupe

Model #: R 502 Series E
Item No: 19276-RB

5 1/2 QT, 110 Volt  

Elmar 28 Station Piston Filler

Model #: RPE-5281
Item No: 19057-RB

MFG: 2003, 307 X 409, Piston 10"L X 3"Dia., 1" Port, No Agitation  

Key Iso-Flo Vibrating Inspection Conveyor

Model #: 412868
Item No: 18916-RB

 Stainless Steel Backsplash Inspection Conveyor 28"W X 8'L   

HUGHES Fresh Mini Husker

Model #: 032-8305
Item No: 18709-MSC

Fresh Market Corn Husker designed to efficiently remove the husk from fresh sweet corn with shanks removed.  Capable of husking 20-30 ears per minute dependent on operator feed rate. Specifically suited for the smaller operator processing fresh market produce or frozen.  The machine requires only one operator to feed and control the equipment.  The husker is capable of also removing stems and debris from fruit, vines such as citrus fruits and apples.  They have also been used to remove stems and debris from beets, carrots, onions, potatoes, and radishes.

  • Capacity 20-30 ears per minute

  • Dimensions 32" wide X 102" long X 57" Heigh

  • Utility Requirements: 230 volt single phase, 1-2 gal. water per minute, 15 Cfm @90 Psi compressed air

  • Safety switches for operator protection, Lexan top cover allows operator view of process 

  • Stainless steel construction of all components except roller shafts and dive assemblies

  • Adjustable hand cranks allow for height adjustment

  • wEquipped with lockable swivel casters 

Safeline Metal Detector with Incline Conveyor

Item No: 18688-M

  • Aperture 24"W X 6"T

  • Incline conveyor blue rubber belt

  • 23"W X 14'L

Waukesha SPX Positive Displacement Pump

Item No: 18577-M

  • Hopper with screw feed

  • Hopper 32"L X 30"W X 22"Deep

  • Duel feed 10" screws

  • Waukasha PD Pump  Model # 134UI 03/15/13 Open Throat In 3" Outlet Stainless Steel Contact 

CMP Tote Dumper

Item No: 18565-M

  • All stainless steel

  • MFG: May 2016

  • 600 Volt

Mueller Porta Tank 435 Gallon

Model #: 435 Gallon
Item No: 18541-M

  • Design pressure 35 PSI

  • Design Temp 100F

  • Test pressure 53 PSI

  • Volume .176 CU FT

  • Medium None/Glyco

  • Stainless steel construction

CMP Dewatering Auger

Model #: PG 161108
Item No: 18538-M

  • Stainless steel construction

  • 10" Dewatering auger X 7'L

  • 115/230 Volt, 1HP motor

Odenberg Spray Washer 13

Model #: 13
Item No: 18532-M

  • Stainless steel construction

  • MFG: 2013

Odenberg Brusher, Peel Remover

Model #: Brusher
Item No: 18529-M

  • Dry peel eliminator

  • MFG: 2013

  • Wet or dry product

  • Depending on brush selection you can gently remove loose peel or aggressively remove minor defects

  • Stainless steel construction 

Odenberg / TOMRA Orbit 450 Steam Peeler Machine

Item No: 18526-M

Infeed Conveyor

  • Stainless Steel Construction

  • 18"W X 164"L X 160" Discharge height

  • Black solid rubber belt with 3" flights

  • Has a hopper for tote dumper loading

Steam Peeler

  • TOMRA Orbit 450

  • SN: 063P

  • MFG: 2013

Vessel

  • 350 PSI AT 437F

  • MAX ALLOW. 0F AT 350PSI

  • SN: 12352

  • MFG: 2-2013

  • NB: 1040

  • CRN: T4433.4

  • Vessel is mild steel

Discharge Auger

  • Stainless steel auger incline conveyor

  • 16" Auger X 11'L X 86" Discharge height

Accumulator

  • SN: 13047

  • MFG: 3-2013

  • NB: 1045

  • 350PSI AT 650F max allow. working pressure

  • -20F AT 350PSI min. design metal temp

Exhaust Tank

  • Odenberg Type ET

  • SN: 1556855

  • Part number M2962040

  • MFG: 2013

  • PS 0,5 bar

  • TS Max 140C

  • TS min -C

  • Pt 1 bar

  • V 3000 L

  • Group of fluid 2

  • Date of test 1/2013

Accumulator

  • NB# 1045

  • 350 PSI @ 650 F Max working pressure

  • S/N 13047 

  • MFG: 3-2013

Custom Metalcraft Tote Dumper

Model #: H-2
Item No: 18523-M

  • All stainless steel

  • MFG: 02-1990

  • 480 volt

A1 Column Dumper

Model #: A24-122
Item No: 18403-M

  • V mag cart dumper 

  • 6' dump height 

  • 7' overall height 

  • Stainless steel construction

Rietz Dual Ribbon Blender

Model #: RS-28-K3410
Item No: 18394-M

  • All stainless steel   

  • MFG: 1978

  • Dual ribbon, dual end discharge

  • Inside blender dimensions 10'L X 60"W X 36" deep

Solbern High Speed Brinner

Model #: LBS
Item No: 18334-M

  • Model # LSB

  • Serial # 26082O

  • Overflow Briner Sauce Filler

Custom Designed and Fabricated Inspection Conveyor 12'L X 24"W

Model #: 12'L X 24"W
Item No: 18277-VO

  • NEW FOOD GRADE FRUIT AND VEGETABLE INSPECTION CONVEYOR

  • A single level conveyorized food process inspection table with a 12'L X 24"W conveyor belt running between 9 foot long UHMW plastic work surfaces.

  • Ideal as a trim line for fruit and vegetable inspection, trimming, coring, sorting, and rework

  • Sized for six workstations

  • Solid interlocking plastic chain type conveyor belt running between 1 3/8" high stainless steel sides.  

  • High density plastic work shelves, 9"W X 9'L  

  • Work surfaces and inspection belt at a 37 inch working height on adjustable height feet (adjustable for approximately 32" to 40").  

  • Gasketed PVC control box with on / off buttons and variable speed control  adjustable for up to 45 feet per minute.

  • All food grade stainless steel construction

Custom Designed & Manufactured 10' Wide Unloading Conveyor

Item No: 18256-MSC

  • Stainless steel construction

  • Overall dimensions 140"L X 140"W X  90"H

  • Spider style conveyor

  • Was previously used for unloading green beans from large bins

  • Blue poly belt

Hughes Fresh Market Corn Cob Cutting Line

Item No: 18226-MSC

  • Fresh curt cob line capacity estimated @ 2-3 tons per hour depending on feed rate and quality of product

  • Line consisting of the following equipment 

  • Hughes product conveyor 20' L x 18" W, stainless steel construction

  • Hughes cob feed shaker orienter to fresh market husker 10' L X 20" W

  • Hughes Husker Fresh Market 2 Lane

  • Hughes fresh market cob saw 

  • Includes platforms and controls 

HMI Heinzen SB100 Auto Batch Dryer

Item No: 18184-WSH

  • Automatic centrifugal spin drying system for high volume drying of fresh cut produce (iceberg lettuce, spring mix, baby spinach, shredded carrots, cabbage slaw, chopped romaine, leafy products...).

  • Includes Z-shaped feed conveyor 12"W with a fine woven belt to allow water to pass through. It is configured with a 16" horizontal infeed, 150"L incline section and a 5' long discharge.  

  • 13 Cubic foot (30"Dia. X 32"Deep) stainless steel drum / dryer basket. Perforations are 5/32"Dia. round holes. Dryer basket has a clean unobstructed interior without spokes or axles in the product zone.

  • Air assisted product transfer and discharge

  • Central lubrication system

  • Stainless steel control box with Allen Bradley PLC control system. Systems includes touch screen operator control panel. This allows for quick product changeover by presetting hold times and other parameters for multiple products

  • All food grade stainless steel construction

Vanmark Hydrolift Destoner

Item No: 17974-MSC

  • 6'H X 24"Dia. stainless steel hydrolift destoner

  • 60"W bottom hopper

  • 480V, 3 Phase  

Cornell 10" Food Pump

Model #: 10NHPP-F12K
Item No: 17962-PMP

  • New condition 

  • Mild steel valute and impeller

  • No motor, pulley or guard

Cornell 10" Foods Pump

Item No: 17959-PMP

  • 50HP motor

  • Mild steel valute and impeller

Vanmark Hydrolift

Item No: 17938-MSC

  • 12'H X 24"Dia. stainless steel hydrolift destoner

  • 58"L X 24"W bottom hopper

  • Top mounted chute 

  • Stainless steel construction 

APV Gaulin Homogenizer

Model #: MS-45-5TBS-2280
Item No: 17872-MSC

  • Max. PSI 5000 lbs.

  • 125 HP Motor, 575 Volt, 60Hz

Auto-Prod Cup Filler

Model #: FP2X8
Item No: 17860-MSC

  • 8-Lane Stainless steel products filler

  • With double indexer, cup feeder, lid denester, tamper evident 

  • Sealer with Allen Bradley Logix 5561 PLC controls

  • Kinetics 6000 Servo drives, Powerflex 40 VFD's #4

  • operated up to 390 CPM- 4oz., 4.5oz., 6oz., Plate diameter 75mm  

Magnuson 12 Roll Brush Washer

Model #: WSP2123-375007.0107
Item No: 17845-MSC

  • Magnuson 12 Roll Brush Peeler Washer

  • Model # WSP-2123

  • Hydraulic drive and power pack 

  • Stainless steel construction

Key Tegra 7775 Color Sorter With G-6

Model #: 7775 603593-1
Item No: 17827-MSC

  • Key Tegra Color Sorter With G-6

  • Model # 7775

  • Serial # 06-148036

  • 4 Camera

  • Year: 2006

Key Manta Color Sorter

Model #: Manta 2030F A-604162-1
Item No: 17803-MSC

  • Equipped with G-6

  • (2) Top IR lasers and (3) Top viewing camera

  • Wet CIP system

  • Touch screen operator interface

  • Year 2008

Fresh Tec Stainless Steel Washer

Item No: 17785-WSH

  • Fresh Tec Stainless Steel Washer

  • Size: 13' Long X 44" Wide X 30" Deep

  • 4 Pumps - 3 to washer 1 to reservoir

  • Stainless Steel Construction

  • Last Washing: Salad Product

Inline Volumetric Six Head Piston Filler

Item No: 17782-FIL

  • Inline Volumetric Six Head Piston Filler

  • Containers: 8 oz, 16 oz, 32 oz (70 mm neck opening)

  • S/N: 37179

  • New in 2017 - Never Used

  • Sanitary Design

  • 3-Way Filling Valve

  • Estimated Rate of Production: 45-55 containers per minute @ 16 oz

Key Tegra 7775 Color Sorter

Model #: 7775 602226-1
Item No: 17773-MSC

  • Equipped with G-6

  • (2) Top Cameras 

  • Product stabilizer

  • Touch screen operator interface

  • Wet CIP System 

  • Year: 2001

Arrowhead Systems Lowerator

Item No: 17623-MSC

  • Arrowhead Systems Stainless Steel Lowerator

  • Adjustable width up to 11-3/4"

  • 156" intake height and a 36" discharge height

  • Gripper chains are driven by duel 1.5 hp 1755 rpm motors - reduced to 175 rpm

  • Requires 230/460 vac 3 phase electrical supply

Lyco Waste Water Reel

Model #: 48/60
Item No: 17548-MSC

  • Lyco Waste Water Drum/Reel

  • Model: 48/60

  • Serial: DS129919134-1

  • Stainless Steel Construction

  • Louvered Screens On Outer Drum 60" Dia. X 96" L

  • Screen: .045

  • Inner Drum Has Been Removed And Not Included With Unit

  • No Drive With Drum, Main Drive Chain Is Attached With Drum Sprocket

Dontech Rotary Screen

Item No: 17437-MSC

  • Dontech Rotary Screen

  • Model: ERDS2572L

  • Serial: 2513

  • Screen Size: .040

Lyco Dirt Reel Washer

Item No: 17434-MSC

  • Lyco Dirt Reel Washer

  • Rotating drum w/ internal spray

  • Drum Dimensions: 36" Dia x 12' L x 1/4" spacing

  • Serial #: DR 0805 41302

  • 3 HP, 230/460V, 60 Hz, 3 Ph motor


G.J. Olney FC 24 Foam Cleaner

Model #: FC 24
Item No: 17398-WSH

  • The Olney Foam Cleaner combines flotation cleaning and screening to provide the cleanest product.

  • An air manifold system incorporates air into the flotation tank to increase buoyancy and float trash, such as hollow or broken kernels and corn silk, to the surface.

  • Corn kernels are de-watered and screened on the vibratory discharge shaker and discharged separately from the trash.

Cornell Food Pump w/ Commercial Vortex Tank

Model #: 6NHPP-F16K
Item No: 17371-PMP

  • Cornell 6NHPP-F16K Food Pump w/ Commercial Vortex Tank

  • Expanded volute cast mild steel pump housing

  • 6" flange inlet/discharge ports

  • Flexible connection between pump and tank

  • All stainless steel tubular support frame and vortex tank

  • Tank measures 42" L x 30" W x 20" Deep

  • Water inlet diffuser/diverter in tank

  • 5 HP 230/460V, 2 Phase belt drive motor w/ mechanical variable speed pulley

Lyco Screw Press

Model #: 2000
Item No: 17152-MSC

  • Model: 2000
  • Serial: SP069916615
  • 12" Dia. Screw
  • 10 hp Motor
  • Stainless Steel Construction

Key Iso-Flo Vibratory In-feed Shaker

Model #: 600722-1
Item No: 17140-SHK

  • Key Iso-Flo Vibratory Infeed Shaker

  • Model: 600722-1

  • Serial: 97-29164

  • Shaker Pan Dimensions: Approx. 53" W x 74" L

  • With Approx. 24" L De-watering Screen

  • Leg Height: Approx. 67"

  • Stainless Steel Construction



Key Iso-Flo Feed Shaker

Item No: 17134-SHK

  • Key Iso-Flo Feed Shaker
  • Overall Dimensions: 120" L x 24" W
  • Two Channel Shaker
  • Channel A: Approx. 8-1/4" W
  • Channel B: Approx. 15-1/2" W
  • 1 HP, 220/380V, 60 Hz, 3 Phase Motor

Key Iso-Flo Feed Shaker

Item No: 17131-SHK

  • Key Iso-Flo Feed Shaker
  • Overall Dimensions: 120" L x 24" W
  • Two Channel Shaker
  • Channel A: Approx. 8-1/4" W
  • Channel B: Approx. 15-1/2" W
  • 1 HP, 220/380V, 60 Hz, 3 Phase Motor

Key Iso-Flo Feed Shaker

Item No: 17128-SHK

  • Key Iso-Flo Feed Shaker
  • Overall Dimensions: 120" L x 24" W
  • Two Channel Shaker
  • Channel A: Approx. 8-1/4" W
  • Channel B: Approx. 15-1/2" W
  • 1 HP, 220/380V, 60 Hz, 3 Phase Motor

Key Iso-Flo Feed Shaker

Model #: S1022773-1
Item No: 17125-SHK

  • Key Iso-Flo Feed Shaker
  • Model: S1022773-1
  • Serial: 10-419307
  • Overall Dimensions: 120" L x 24" W
  • Two Channel Shaker
  • Channel A: Approx. 8-1/4" W
  • Channel B: Approx. 15-1/2" W
  • 1 HP, 220/380V, 60 Hz, 3 Phase Motor

AIRCO Spiral Freezer

Model #: KF13-230S
Item No: 17038-FZ

  • AIRCO 304 SS Spiral Freezer
  • Model: KF13-230S
  • Stainless Steel Omni Grid/Flex belt
  • Belt Width: 13" (Usable Belt Width: 11")
  • Clearance Height: 3-1/4"
  • Belt Height @ In-feed: 18" -- Location: Left
  • Out-feed Height: 8'
  • Usable Belt Length: 228'
  • Drum Dia. 57" --- 10 tiers.
  • Configuration: Straight Through --- Rotation: CW
  • Freezing Zone: 203'
  • CO2. to -120 ˚F --- CO2 system pressure: 300 psi
  • Electric: 460V, 30A --- PLC Controls
  • OAD: 11’ - 4” L x 8’ - 4” W x 10' H
  • Rated to approx. 1500 lbs per hour with a variable dwell time of 4 to 40 minutes.
  • Last running fire-roasted tomatoes

Lee 200 Gallon Dual Motion Scraped Kettle w/ INA Style Agitation

Model #: D9MS
Item No: 17017-KT

  • Model: D9MS
  • S/N: 13872-1-1
  • Year: 2000
  • MAWP 90 PSI @ 332˚ F
  • MDMT 90 PSI @ -20˚ F
  • NB# 8132
  • Fixed bridge inclined dual motion agitator
  • Single hinged cover
  • 51" dia x 51" deep x 115" OAH (9' 7")
  • 4-1/2" CBO with Fluid Flow valve model BFT
  • MISSING tag on motor -- approx. 5 HP
  • Temperature probe (Missing Gauge)
  • Last used in food industry

Hycor Rotostrainer

Model #: RSA 3672 - .005
Item No: 17011-MSC

  • Hycor Rotary Waste Screen
  • Model: RSA 3672 - .005
  • Serial: H1902007
  • Drum Dimensions: 36" Dia. x 72" L
  • Stainless Steel Construction

Cornell 6" Food Pump w/ Key Stainless Steel Vortex

Model #: 6NHPP-F16K
Item No: 16981-PMP

  • Key Cornell 6" Food Pump w/ Key Stainless Steel Vortex
  • Model: 6NHPP-F16K
  • Serial: 155524 13.50
  • Vortex Dimensions: 43" L x 32" W x 21" Deep
  • 7.5 HP motor



Custom Designed & Manufactured Incline Conveyor

Item No: 16972-COV

  • Custom Designed & Manufactured Incline Conveyor
  • 24"W x Approx. 15' L

Custom Designed & Manufactured Incline Conveyor

Item No: 16969-COV

  • Custom Designed & Manufactured Incline Conveyor
  • 24"W x Approx. 15' L

(NEW) Magnuson Model F Trough Belt

Model #: F
Item No: 16945-MSC

  • (NEW) Magnuson Speed Up Belt
  • Model: F
  • For single file controlled flow of products on a 60-degree V-belt conveyor, two belt sections and two belt speeds
  • Includes (1) 1/2 HP, 230/460 V, 3 Phase, 60 cycle gear motor
  • Stainless steel construction

LYCO Reclaim Reel

Model #: 36 x 60
Item No: 16915-MSC

  • Model: 36 x 60
  • Serial: ODS-1205-42470
  • Drum Dimensions: 36" Dia. X 60" L
  • Overall Dimensions: 60" W X 106" L x 117" H
  • Screen openings: 1/16" perfs. -- spaced 1/8" on center
  • Capacity: 1200 GPM - (Application dependent)
  • 304 Stainless Steel Construction
  • New in 2005
  • Previously ran dry beans

Stainless Steel Screw Elevator

Item No: 16873-MSC

  • 12" Dia. x 15' L
  • 24” In-feed height
  • 108” Discharge height
  • 13" W x 15" Deep Covered Screw Discharge
  • Chain driven
  • Stainless Steel base with casters
  • No drive

Custom Hydrosieve (NEW)

Model #: 3027
Item No: 16810-MSC

  • Custom Hydrosieve (NEW)

  • Model: 3027

  • Size: 30" W X 26" H

  • Screen: .040

  • Stainless Steel Construction

  • Tilt screen for easy cleaning




Shufflo Two Stage Speed-up Belt

Model #: SFF
Item No: 16807-MSC

  • Model: SFF
  • Serial: 4426-4
  • 90" L x 2-1/2" H
  • 1-1/2 HP 230/460V 3 PH Motor - 1740 RPM

Single Stage Speed-up Belt

Item No: 16804-MSC

  • Single Stage Speed-up Belt
  • 84" L x 5" H
  • 1HP 230/460V 3 PH Motor - 1745 RPM

Lightnin Mixer

Model #: PG-15
Item No: 16729-MIX

  • Model: PG-15
  • Serial: 1-74265-3
  • 5 HP Motor 230/460 V/60 Hz/3 Ph
  • No Prop

FMC 12 Pocket Granular Fillers

Model #: 12-G
Item No: 16675-FIL

  • FMC 12 Pocket Granular Filler
  • Model: 12-G
  • Serial: N/A
  • Set: 603 x 700
  • Stainless Steel Contact
  • Mild Steel Painted Base
Priority One Case Palletizer

Model #: Pro-Pall 3500
Item No: 16651-PLT

  • Runs 300ml, 500ml. 700/710ml, 1L, 1.5L-All Pack Sizes
  • 48 CPM on 12 pack
  • Voltage: 575V/3/60

 

Bin Dump W/ Live Bottom

Model #: 48" X 48"
Item No: 16585-VO

  • Custom Designed Bin Dumper With Live Bottom Designed to Handle 48" Tall Macro Bins 48" Square
  • Has Hopper Level Gate to Meter Discharge of Conveyor
  • Stand Alone Hydraulic Package
  • Stainless Steel Construction

Weigh Conveyor

Item No: 16552-MSC

  • 39" W x  15-3/4' L
  • Sterling 1-1/2 HP, 3PH, 230/460V, 60Hz motor

Key Optyx Color Sorter w/ G6

Model #: Key Optyx 602942-1
Item No: 16525-MSC

  • Key Technologies Optyx Color Sorters
  • M/N: Key Optyx 602942-1
  • S/N: 03-100347
  • No in-feed shaker
  • Equiped With G6

Quadro Stainless Steel Ytron ZC Mixer

Model #: ZC1 Global-Single Seal
Item No: 16522-MIX

  • Model:  ZC1 Global-Single Seal
  • Serial: ZC1-0179R
  • Motor: 7.5HP, 3600 RPM, 460V, 3 Phase, 60Hz
  • Stainless Steel construction

A&M Process Equipment Stainless Steel Dual Shaft Double Ribbon Blender

Model #: DRB600
Item No: 16519-MIX

  • M/N: DRB600 53" W x 83" L x 41" Deep
  • Ribbon agitators: 25" Dia. Double-Helix 1-1/2" by 1/4" ribbons outside 3" Dia. shaft - pneumatic glands
  • Each Ribbon Shaft has 7.5 HP 3 phase drive w/ gear reducer - belt and pulley drive configuration
  • 3" Dia. Tri-clamp end bottom discharge outlet in each "U" trough
  • 65" In-feed Height
  • 22" Discharge Height
  • Hinged covers w/ pour grids and safety interlock switches for each side
  • Stainless Steel Construction

Zacmi 48-Pocket Filler

Model #: 233
Item No: 16501-FIL

  • ZACMI 48 Pocket Granular Filler
  • Model: 0233
  • Serial: 0233-48-T-96
  • Set @ 300 X 407
  • Stainless Steel Construction

Fox Leader Fillers

Item No: 16489-FIL

  • Set @ 300 x 407 - adjustable
  • Stainless Steel Construction
Key Stainless Steel Tote Dump System

Model #: 426269-1
Item No: 16447-MSC

  • Hopper Size: 44" W X 54 " H
  • Pivot Point 9' H
  • Overall Height: 11' 6"
  • Year: 1998
  • No Hydraulic Power Pack

Lyco Screw Press

Model #: 2000
Item No: 16426-MSC

  • Model: 2000
  • Serial: S-P030020112
  • 12" Dia. Screw
  • 10 hp Motor
  • 42" of Screen W/ 3/32" Perfs
  • Stainless Steel Construction

Custom Designed & Fabricated Stainless Steel Mix Tank

Item No: 16387-TK

  • Stainless Steel Single Shell
  • 33" Dia. X 49" H

Groen Pressure Kettle

Model #: TA-20-SP
Item No: 16381-KT

  • M/N: TA-20-SP

  • S/N: 716

  • NAB #:24037

  • Max. Working Pressure: 60 psi

  • Single Agitation


Key Flotation Washer with Dewatering Discharge Conveyor

Item No: 16318-WSH

  • Washer Dimensions: 42" W x 60" L
  • Conveyor Dimensions: 42" W x 56" L
  • 4" Recircation Pump
Custom Designed & Fabricated Flotation Washer

Item No: 16315-WSH

  • 30" W x 60" L
  • 3" Re-circulation Pump
  • Stainless Steel Construction

Key Reclaim Reel

Model #: 5312-C-4
Item No: 16300-MSC

  • M/N: 5312-C-4
  • S/N: 83-53-140
  • 18" D x 36" L
  • Perfs: .060
  • Baldor 1/2 HP motor
  • Stainless Steel Construction
Key 2X Air Cleaner

Item No: 16279-MSC

  • 18" W X 48" L
  • Mild Steel Construction and Frame

Key Reclaim Reel

Item No: 16270-MSC

  • Model: 406-901
  • Serial: 87-53196
  • 18" D x 36" L
  • Perfs: .060
  • Baldor 1/2 HP motor
  • Stainless Steel Construction

Key 2X Air Cleaner

Item No: 16264-MSC

  • 24" W x 48" L
  • Stainless Steel In-Feed Shaker
  • Ajax Shaker with 5 HP Blower Motor
  • (Missing Upper Leaf Hopper)



Custom Designed & Fabricated Reclaim Reel

Item No: 16255-MSC

  • 48" L x 24" Dia.
  • .060 screen
  • Stainless Steel Construction
  • Stainless Steel Frame

G.J. Olney Destoner Washer

Model #: 24 MINI MAX
Item No: 16240-WSH

  • 24" Wide Ripple Pan X 72" Long
  • Equipped with 2 HP Return Pump
  • 1/2 HP Drive on the Discharge Conveyor

Vertiflo 6" Stainless Steel Hydro Food Pump

Model #: 1326
Item No: 16222-PMP

  • Size: 6" x 6" x 10"
  • Motor: 20 HP 230/460 V
  • Stainless Steel Frame

(NEW) All Stainless Steel Bin / Tote Dumper

Item No: 15997-MSC

  • Configured for bins up to 45" wide by 48" long up to 52 5/8" high. Bin/tote holder measuring 53-1/2 wide by 48" long by 42" deep.

  • Manually adjustable hold-down bar settable from 28.5" to 53-1/2" bin height clearance.

  • Heavy duty tubular stainless frame construction, with dump action provided by hydraulic cylinders powered by a self-contained hydraulic power pack with reservoir and manual controls.

  • Set for 208-230/460 volt 3 phase electrical input (unless otherwise specified). System rated to 3,500 lbs weight capacity. Comes set for FLOOR LEVEL INFEED, with a 38" pivot point, and 40" dump height. 

  • All NEW construction.


Cornell 6" Hydro Food Pump

Model #: 6NHT-2R
Item No: 15952-PMP

  • Model: 6NHT-2R

  • 6" Inlet & Outlet

  • Pump Only



A.K. Robins Rotary Wash Reel 1983

Model #: 1983
Item No: 15901-MSC

  • 29" Dia. X 118" L
  • Perfs: .090"
  • Stainless steel construction

Custom Designed and Manufactured Tank

Item No: 15625-TNK

  • 60" H x 52" Dia.

  • Tank Capacity: Approx. 500 Gallons

Breddo Likwifier Liquifier

Item No: 15562-MSC

  • Overall: 44” x 44” x 81” Tall
  • Tank: 44” x 44” x 39” Tall
  • Motor: 40HP, 3Ph, 60Hz, 1765 RPM, 230/460 volts

Key Iso-Flo Vibratory Feeder S10224794

Model #: S10224794
Item No: 15433-VO

  • 24”W x 117"L

Zacmi 50 Pocket Filler 0275-50

Model #: 0275-50
Item No: 15382-FIL

  • Zacmi 50 Pocket Green Bean Filler
  • Model: 0275-50
  • Serial: 108802
  • Set: 300 x 407
  • Year: 2010
  • Drawing # 800003696

Whallon Palletizer/Depalletizer

Item No: 15310-MSC

    • Pallet Conveyor: 140" x 49"
    • Magnetic Head: 52" x 44"
    • Accumulation Table: 9' x 4'

Whallon Palletizer/Depalletizer 790

Model #: 790
Item No: 15307-MSC

    • Pallet Conveyor: 13" x 49"
    • Magnetic Head: 42" x 50"
    • Feed Table: 9' x 51"
    • Single Filer: 10' x 16"

Vetter Screw Extracting Press

Item No: 15202-MSC

  • Features single 18" Stainless Steel screw tapering into 60" L screening area with heavy duty frame encasing fine screen
  • Mounted on twin I beams 17'6" L (overall) x 46" W x 54" H
  • Top mounted plate on gear reducer accepts 60 HP, 364 T frame at 1165 RPM (drive required)
  • 20" x 36" rectangular flanged In-feed hopper
  • Screen area features (4) full length spray pipes equally spaced for washing from single inlet manifold

 

Elmar 28-Valve Piston Filler RP628

Model #: RP628
Item No: 14953-FIL

    • Stainless steel construction
    • Set for 250 ml rectangle shape container
    • Fill range: 8.5 fl oz min. 20 fl oz max.

 

Elmar 35 Piston Filler RP-35

Model #: RP-35
Item No: 14926-FIL

    • 1-3/4" diameter piston with approximate 9" stroke
    • Set on 211 diameter cans
    • Timing screw infeed and infeed star
    • Pneumatically operated no-call no-fill
    • Waukesha straight sided valves with 5/8" X 1" ports
    • Stainless steel base

 

Regal Stainless Steel Hydrosieve

Model #: 54
Item No: 14602-MSC

  • Model: 54

  • 54" W x 63" H

  • Screen: .060

  • Tilt-up clean out screen

  • Stainless Steel Construction




Federal Rotary 18 Valve Net Weight Filler F18 Series 720

Model #: F18 Series 720
Item No: 14419-FIL

    • 18 Valve Federal Weight Filler with:
    • Model F18 Series 720
    • 4.9 inch centers
    • 7 kg weigh cells
    • Speeds up to 90bpm
    • Last ran 8oz, 12oz, & 16oz plastic bottles
    • Stainless Steel Construction

 

Gaulin Homogenizer 15MR8TBA

Model #: 15MR8TBA
Item No: 14257-MSC

    • 2 stage Stainless Steel lab size homogenizer
    • Rated up to 15 GPH depending on application
    • All 316 Stainless Steel contact parts
    • Capable of operating continuously at 8,000 PSI and intermittently at 10,000 PSI for up to 20 minutes
    • Able to process a minimum volume of 1 pint
    • Pres 3 HP motor drive
    • Stainless steel frame

 

Loma Metal Detector T-7

Model #: T-7
Item No: 13927-MSC

    • 18.5" W x 1.5" H Aperture
    • Overal DImensions: 6' L x 40" W
    • 12" belt retracts on reject
    • Constructed with stainless steel

 

Custom Design & Fabricated Overflow Briner

Item No: 13693-BBB

    • Custom Design & Fabricated Overflow Briner
    • 72" L Overflow
    • Stainless Steel Construction
    • Stainless Steel Contact Parts

 

Stainless Steel Accumulation Table

Item No: 13669-T

  • Stainless Steel Accumulation Table

FMC Granular Filler 21-G

Model #: 21-G
Item No: 13627-FIL

    • 3 HP, 230/460V, 1750 RPM, 3 PH, 60 Hz 8.2/4.1 amp Baldor motor
    • 1/3 HP, 230/460V, 1725 RPM, 3 PH, 60 Hz, 1/.5 amp duty master motor

 

Commercial Stainless Steel Air Cleaner

Item No: 13564-MSC

  • 36" W feed shaker w/ removable screen
  • 14" screen perforation
  • Equipped with 1 1/2 HP motor & Ajax shaker
  • 10 HP blower motor

 

Cornell Pump Co. 4" Food Pump 4NMPP-F5K

Model #: 4NMPP-F5K
Item No: 13468-PMP

    • 4" inlet and outlet
    • 24" W x  42" L x 18" deep stainless steel vortex
    • Equipped with 5 HP, 230 V, 60 Hz, 3Ph, 1740 RPM, 13.4/6.7 amp motor

 

G.J. Olney Washer 48 Flood

Model #: 48 Flood
Item No: 13435-WSH

    • Model #: 48 Flood
    • Equipped with Crane Deming Food Pump: 6-1/2" Inlet & Outlet
    • Product #: 4021 50710400
    • Includes Lincoln Electric 20 HP, 230/460 V, 1760 RPM, 60 Hz, 54/27 amp, 3 PH motor
    • Overall Dimensions: 84" W x 168" L x 96" H; Interior Dimensions: 48" W x 140" L x 47" H
    • Includes (2) Stainless Steel Screens
    • Screen Perforation: 3/16"
    • (1) Screen Measuring: 48" W x 27-1/2" L; (2) Screens Measuring: 48" W x 28-1/2" L
    • Includes (6) Rows of Overhead Spray Nozzles, totaling (32) Overhead Spray Nozzles;
    • Equipped with: RETURN RESERVOIR -- 6 1/2" Inlet & Outlet
    • 72" L x 90" W x 35" Diameter
    • Contains (3) Stainless Steel Screens at top of machine measuring 27 1/2" in the Middle section and 29 1/2" on both the Left and Right sections
    • Stainless Steel Construction

 

Cornell 10" Food Pump

Model #: 10NHPP-F12K PKG
Item No: 13357-PMP

  • Model: 10NHPP-F12K

  • Serial: 143342 21.00

  • Equipped with Baldor 3 Ph, 230/460 V, 96/48 amp, 40 HP, 60 Hz, 1765 RPM motor

Sani-Matic Tunnel Washer R-D5-RR1-FR1

Model #: R-D5-RR1-FR1
Item No: 12955-WSH

    • Model: R-D5-RR1-FR1
    • Capacity: Sizes up to 18" x 24" x 28" L
    • Overall Dimensions: 86.5" H x 64" W
    • 3 Individual Cleaning Sections:
    • 1 - Recirculated Detergent Section,with (5) Spray Rings
    • 2 - Recirculated Rinse Section with (1) Spray Ring
    • 3 - Final Rinse Section with (1) Spray Ring; Equipped with 230/460 V, 3525 RPM, 60 Hz, 1.15 amp motor
    • Used for Moderate Soil Conditions Including: Wet Carbohydrates, Dried Liquids with Suspended and Dissolved Solids, Fats & Oils, Wet & Semi-Dry Fruit

 

Reconditioned Shufflo Grovedale Feeder

Item No: 12925-CTR

    • Stainless Steel Construction

 

Allen French Style Bean Feeder

Item No: 12883-MSC

    • Stainless steel contact parts
    • Mild steel frame

 

Diamond Stainless Steel Pork Depositor D-105-RD

Model #: D-105-RD
Item No: 12544-MSC

    • Set to 603 can diameter
    • Equipped with Eurodrives on cutter and can feed
    • Central lube system

 

Custom Overflow Briner

Item No: 12415-MSC

    • Set: 211 Diameter Can
    • Overall Length: 16'
    • Stainless Steel Construction

 

Fairbanks Morse Cornell Type Water Pump

Item No: 12388-PMP

    • 5" Inlet and 4" Outlet
    • 450 GPM capacity
    • Equipped with 230/460 V, 10 HP, 1725 RPM motor
    • Thrush BF-104 Casting

 



Arpac Bundler & Tunnel 105-28

Model #: 105-28
Item No: 12343-PAK

    • Model: 105-28
    • Seal Bar Opening: 9 3/4" Fully Extended
    • Includes Allen-Bradley Model: SLC 5/01 CPU

 

Custom Designed & Fabricated Inline Briner

Item No: 12304-MSC

    • Stainless Steel Inline Briner
    • Set: 211 dia.
    • Overall Length: 21'
    • Briner Tank Length: 118"
    • Variable Speed Timing Screw In-feed
    • Stainless Steel Construction
    • No Tag
    • No Can Chain

 

A. K. Robins Inline Briner

Item No: 12301-MSC

    • Set to 401 diameter
    • Overall Length: 13'
    • Timing screw in-feed
    • Constructed with stainless steel

 

Custom Stainless Steel Steam Jacketed Kettle

Item No: 12046-KT

    • Steam Jacketed Kettle
    • 54" Dia. x 39" Deep
    • No Tag
    • Stainless Steel Construction

 

Groen INA Kettle

Model #: INA-300-SP
Item No: 12019-KT

  • Groen INA Kettle

  • Model: INA-300-SP

  • N.B.#: 42564

  • Max. Working Pressure: 45 PSI @ 300˚F

  • Single Motion Scrape

Mueller Horizontal Tank 1000 Gallon Horizontal

Model #: 1000 Gallon Horizontal
Item No: 11974-TNK

  • All Stainless steel construction
  • 58" Dia. x 122" L
  • Maximum Vessel Working Pressure: 44 PSI
  • Maximum Vessel Temperature: 250˚ F
  • Top man-way


Muller Automatic Pallet Wrapper EGA

Model #: EGA
Item No: 11707-PAK

    • Model #: EGA
    • Includes In-feed Conveyor, Pallet Spinner, Shuttle Conveyor, Scissor Lift & Conveyor
    • Equipped with 240 V, 3 PH, 60 Hz motor
    • Overall Length: 27' L x 54" W Conveyor

 

Custom Designed & Manufactured Feeder Bin

Item No: 11695-MSC

  • 32" Dia. x 8' L
  • Constructed with stainless steel

 

Hytrol Roller Conveyor Drive Section

Item No: 11530-VO

    • Dimensions: 120" L x 12" W
    • 1 HP brake motor
    • New, never used
    • MFG in 2004

 


Liquid Carbonic CO2 Flighted Belt Freezer JE-U3-A

Model #: JE-U3-A
Item No: 11518-FZ

  • Two sections - 36" W belt
  • 5 flights
  • Tight mesh belt
  • Stainless steel construction

 

Peerless Stainless Steel Mixer DA-100

Model #: DA-100
Item No: 10861-MIX

    • Model: DA-100
    • Heavy Duty Double Arm Mixer
    • Capacity: 500 lbs.
    • Includes Hot Water Make up System with Circulating Pump and Allen Bradley PLC Controller Touch Pad
    • Hydraulic Tilt -- Blades are Sigma Configuration
    • Stainless Steel Construction
    • Equipped with 15HP Hydraulic Drive
    • New in 1999

 

Moline Spiral Mixer MSM-352-4

Model #: MSM-352-4
Item No: 09724-BL

    • Model: MSM-352-4
    • 2-Speed Digital Mixer
    • Dry Flour Capacity: 200 lbs.
    • Dough Capacity: 384 with an Absorption Rate of 62%
    • Equipped with 220 V, 3 Ph, 60 Hz motor
    • NEW 1994

 

Hartness Drop Case Packer 825

Model #: 825
Item No: 09703-PAK

    • New, made in 1989
    • Stainless steel frame

 

Busse Unloader B5-C

Model #: B5-C
Item No: 09556-MSC

    • 6" W stainless steel table top chains
    • Single filing table
    • Equipped with power sweep and standard base mounted hydraulic power pack
    • 230/460V, 3 PH drive motor

 

Hoffman Rotary Cap Feeder FR-30

Model #: FR-30
Item No: 09202-MSC

    • 40", 40", and 9' discharge height
    • 30" rotary disc cap feeder
    • Mounted on stainless steel frame

 

Hoffman Rotary Cap Feeder FT-30

Model #: FT-30
Item No: 09199-MSC

    • 1" W x 5"L discharge belt
    • 38 mm set flip top plastic cap
    • 30" rotary diameter disc

 


Mateer Burt Hydraulic Horizontal Feed Roll Thru Labeler 704

Model #: 704
Item No: 08044-LBL

    • Set to 603 x 700
    • Equipped with hydraulic label bed
    • Mild steel painted frame

 

Koach Liquid Nitrogen Immersion Freezer CIF-350-940

Model #: CIF-350-940
Item No: 07498-FZ

  • 48" W x 12' long
  • 4000 to 6000-lb. capacity per hour
  • Equipped with 15 HP motor
  • Clean out conveyor

 

Busse Horizontal Manual Loader LBH

Model #: LBH
Item No: 00284-LOD

    • Floor piston jack

 

Busse Vertical Retort Power Loader PL

Model #: PL
Item No: 00271-LOD

    • For round baskets

 

Markets Served
Need help?

Not finding what you're looking for?

Have a question?

We'd love to hear from you!

Contact Us

or call 1-234-206-2882

Weekly Inventory Updates
Subscribe to our Newsletter
Latest Blog Post