Used Processed Foods Equipment

Processed food encompasses a wide range of methods to prolong and maximize both the life and the quality of fruits, vegetables, meat, poultry and seafood. The food undergoes various procedures including cooking, fermentation, drying, and freezing, all depending on the end product to be achieved. The maintenance and sanitation of these types of equipment is important to avoid spoilage and other contamination.

Regal Equipment offers used and reconditioned processing equipment that caters to processed food companies’ needs. To learn more about a specific unit, click on the product name below.

Used Processed Foods Equipment

Mepaco ThermaBlend 170

Model #: ThermoBlend170

  • 4,000 lb. capacity

  • Dual shaft ribbon agitation

  • Dual end discharge

  • Hopper is 90"L X 60"W X 40"Deep

  •  Jacketed 100PSI @ 350F

  • MFG: 2002

  • R stamp tag 1367 2009

Lyco Blancher

Model #: 8600
Item No: 21922-BL

Lyco Blancher

Model: 8600

S/N: RDB089713055

60" dia X 24' Rotary Drum

Gravity chute feed

Discharge 2 way flip top cover

2 to 60 min retention time 

 

Hughes Blancher

Model #: 04-10016
Item No: 21892-BL

Hughes Stainless Steel Blancher

Model # 04-10016

Serial # 91-12117

Screen Perforation 1/16"

Size : 60" W X 20' Long

Stainless Steel Construction

Alvey 910 Palletizer

Item No: 20761-RB

SN: 01-KE85119, MFG: 1998, Allen Bradly 1305 Controlled, Hydraulic Hoist

Kisters Model TSP A-H Tray Former, Packer, Wrapper, Bundler and Tunnel, New 2016

Item No: 20755-RB

Type: TSP A-H, SN: 10335363 89406060-000100, Tray Former Bundler (Sammelpackmaschine) SN: 10337742 89406060-00010, New 2016 Installed in 2017, Order # 89406060, Nominal Capacity 110,400 Container per Hour, Maximum # of Cycles 80 Cycles per Minute, Length 22,200mm, Width 2,837mm, Height 2,430 +/- 50mm, Weight Approximately 17,236kg 

Lot (2) Matthews Marking Products Case Coder

Item No: 20743-RB

I-Mark V84 Ez Touch Ink Jet Case Coder  

Kisters Tray Pack Wrapper, Bundler and Tunnel

Item No: 20740-RB

SN: 851080,MN: 97180, MFG: 1985

Alvey 910 Palletizer

Item No: 20710-RB

SN: 01-EK06119, MFG: 2000, Hydraulic Hoist, SlC 5/05 Controls  

Lot (2) Matthews Marking Products Case Coder

Item No: 20707-RB

I-Mark EZ Touch V84, Case Coder

Lot (2) Matthews Marking Products Case Coder

Item No: 20680-RB

I-Mark EZ Touch V84, Case Coder

Bear Roll Through Labler

Item No: 20587-RB

404 X 700, No Tag

Kister TSP-060 Tray Packer Shrink Wrapper Bundler

Item No: 20569-RB

Type: TSP 060 V, M/C - Number: 002456, MFG: 2003, Set 6 X 2, Folded Tray 13.5"L X 5"W X 2"T, Allen Bradly Logics5555, Has Double Stack Function Not Inuse At This Tine, Nordson Pro Blue 10 Glue Pod

Kister Model TSP-060 Tray Packer Shrink Wrapper Bundler

Item No: 20557-RB

Type: TSP 060 V, M/C - Number: 002455 , MFG: 2003, Set .., Folded Tray 13.5"L X 5"W X 2"T, Allen Bradly Logics5555, Has Double Stack Function Not Inuse At This Tine, Nordson Pro Blue 10 Glue Pod  

Lot (3) Slip Sheets for Retort Baskets

Item No: 20521-RB

For Retort Baskets, 29.5"W X 43"L X 43"D   

Lot (33) Mild Steel Retort Baskets

Item No: 20518-RB

29.5"W X 43"L X 43"D, Fails Bottoms

Lot (23) Mild Steel Retort Baskets

Item No: 20508-RB

29.5"W X 43"L X 43"D, False Bottoms

Krones Solomodul 35 Station Labler

Item No: 20503-RB

MN: Solomodul II-, Equipment K406397, MFG: 2017, With Krones Checkmat 731, SN: K731CCF, Krones Table Top Conveyor 3.5"W X 25' Approx., Control Cabinet, Spare Parts Shelf, 2 Component Pressure Sensitive Label for Set 4 Oz, Change Parts for 4.5 Oz, 5 Oz  

Key V-Shape Hopper with Metering Valve

Item No: 20367-RB

 Hopper 5'W X 5'L X 3'Deep, Metering Pockets 12"L X 3.5"Deep

Lot (2) Stainless Steel Cooking Baskets with Carts

Item No: 20260-RB

40.5"Dia. X 24"Deep with 1/2" perforations

Mettler Toledo Safeline Metal Detector with Conveyor

Item No: 20257-RB

Metal Detector SN: 35952 with Conveyor 14.5"W X 7'L X Discharge Height of 44"

Custom Metalcraft Tote Dumper

Item No: 20206-RB

  • MN: H2-1094500

  • SN: 36787-1

  • Stainless Steel Tote Dumper Overall

  • 63"W X 124"T X 64"Deep,

  • Hydraulically Operated

Magnetic Cap Remover For Duds

Item No: 19618-RB

5'L X 3.5"W  

Magnetic Cap Remover For Duds

Item No: 19606-RB

Stainless Steel Construction, 2.5'L X 3.5"W  

Magnetic Cap Remover For Duds

Item No: 19570-RB

 Stainless Steel Construction, 2'L X 3.5"W  

Magnetic Cap Remover For Duds

Item No: 19567-RB

Stainless Steel Construction, 5'L X 3.5"W  

Lot Table Top Conveyor

Item No: 19543-RB

Approx. 120', Starts After the Accumulation Table and Ends Where Both Lines Merge  

Magnetic Cap Remover For Duds

Item No: 19534-RB

2'L X 3.5"W, Stainless Steel Construction  

Magnetic Cap Remover For Duds

Item No: 19531-RB

Stainless Steel Construction, 5'L X 3.5"W  

Lot (3) Allen Bradley Chart Recorders

Model #: Commander 1900
Item No: 19510-RB


FMC/JBT Lab Steritort

Item No: 19438-RB

MFG: 2010, Max Working Pressure 45 psi at 292F, Multiple Can Size Reels, 211, 300, 404, 307, 603, 29"Deep X 60"Dia., JBT FoodTech Log-Tec Momentum Controls  

Allpax Pilot Style Retort

Model #: 2402
Item No: 19426-RB

Model # 2402

Serial # J6902

Gentle Motion Agitation,Spray Capable, 1/4" Shell, 5/16" F and D Heads, 90 PSI, MFG: 2010  

Lot (3) Lab Style Retort Baskets

Item No: 19423-RB

25"Dia. X 22"Deep with 1" Holes, Solid Bottom

Lot (4) Sections of Stainless Steel Wire Shelves

Item No: 19408-RB

 36"W X 18"D 72"T No Contents

Lot (5) Thermal Processing Probe Punches

Item No: 19405-RB

Custom Designed and Fabricated Equipment for Temperature Probe Punches  

Lot (125) Sections of Stainless Steel Wire Shelves

Item No: 19363-RB

36"W X 18"D X 72"T, No Contents   

Lot (12) Sections of Stainless Steel Wire Shelves

Item No: 19360-RB

36"W X 18"D X 72"T, No Contents   

Lot (23) Sections of Stainless Steel Wire Shelves

Item No: 19354-RB

36"W X 18"D X 72"T, No Contents  

Lightinin Lab Mixer

Model #: G2U05R
Item No: 19339-RB


Lot (7) Wire Shelves

Item No: 19249-RB

Green, 34"W X 18"Deep X 74"T, No Contents  

Lot (2) Stainless Steel Wire Shelves

Item No: 19246-RB

47"W X 18"Deep X 76"T, No Contents

Lot (2) Stainless Steel Table

Item No: 19198

12'L X 36"W X 36"T, Raised Lip

Light Weight Racking

Item No: 19189-RB

Green, 60"W X 20"Deep X 75"T, No Contents  

Lot (3) Stainless Steel Tables

Item No: 19183-RB

72"L X 30"W X 39"T, Lower Shelf, On Casters, NSF Approved

Markem Imaje Ink Jet Coder

Model #: 9040 IP65
Item No: 19165-RB


Accumulation Table

Item No: 19081-RB

13'L X 5'W, 6 Bidirectional Conveyors   

Arrowhead S/S Table Top Conveyor

Item No: 19051-RB

4.5"W, Approx. 80', Conveyor for Line 23A  

Key Tote Dumper With Hopper and Metering Valve

Model #: 4326615-1
Item No: 19042-RB

Hydraulically Operated  

Lot Cable Way Conveyor

Item No: 19024-RB

Ceiling Mounted In Cooker Section Approx.....  

Dewalt Pressure Washer

Item No: 19015-RB

Gas Powered 3100 psi, 2.8 GPM  

JBT/FMC Sterilmatic Cooker Cooler Parts

Item No: 19009-RB

Lot of 3 Sections of Metal Shelving With Assorted FMC JBT Sterilmatic Cooker Cooler Parts and Misc. Plumbing Fittings  

FMC JBT Cooker Cooler 211 X 400 End Reel

Item No: 19006-RB

56 Flight End Reel  

Lot (3) 15 HP Electric Motors New

Item No: 18994-RB

Still On Pallet  

Key Iso-Flo Inspection Conveyor

Model #: 412868
Item No: 18946-RB

Stainless Steel Inspection Conveyor 28"W X 8'L MN  

Key IQF Vegetable Unloading System

Model #: 413770
Item No: 18943-RB

Includes a Tote Dumper, Equipped with Feed Hopper, Metering Valve, Hydraulically Powered  

Key Iso-Flo Vibrating Inspection Conveyor

Model #: 412868
Item No: 18916-RB

 Stainless Steel Backsplash Inspection Conveyor 28"W X 8'L   

Key Iso-Flo Vibrating Inspection Conveyor

Model #: 413859
Item No: 18913-RB

Stainless Steel Inspection Conveyor 28"W X 8'L   

Key Iso-Flo Vibrating Inspection Conveyor

Model #: 412868
Item No: 18910-RB

Stainless Steel Inspection Conveyor 28"W X 8'L   

Key Iso-Flo Vibrating Inspection Conveyor

Model #: 412868
Item No: 18907-RB

Stainless Steel Inspection Conveyor 28"W X 8'L   

Key Iso-Flo Vibrating Inspection Conveyor

Model #: 412861
Item No: 18904-RB

Stainless Steel Inspection Conveyor 28"W X 8'L   

Key Iso-Flo Vibrating Inspection Conveyor

Model #: 412868
Item No: 18901-RB

Stainless Steel Inspection Conveyor 28"W X 8'L   

Key IQF Blend System

Model #: 414069
Item No: 18898-RB

Includes 3 Tote Dumpers on Common Frame, Equipped with Feed Hopper, Frozen Rotary Breaker, Metering Valve, Hydraulically Powered  

Key IQF Blend System

Model #: 414069
Item No: 18895-RB

Includes 3 Tote Dumpers on Common Frame, Equipped with Feed Hopper, Frozen Rotary Breaker, Metering Valve, Hydraulically Powered  

FMC JBT 5-Shell Rotary Sterilmatic Pressure Cooker Cooler

Item No: 18839-RB

Set For Can Sizes 300, 303, & 307 X 512 

Standard Pressure Cooker Serial # 3642315-99 Nab # 3108 

Reverse Pressure Cooker Serial # 3642315-99 Nab # 3107 

Standard Pressure Cooler Serial # 3642317-99 Nab # 3113

Reverse Pressure Cooler Serial # 3642318-99 Nab # 3111

Standard Atmospheric Cooler Serial # 3442-15217, Can Capacity 3612, (Replaced With New Shell and Spiral January 2018)

FMC JBT Sterilmatic 3 Shell Cooker/Cooler Set 300x407

Item No: 18838-RB

Pressure Cooker Shell 1: NB 1480, SN: 3647-459-67, Single Infeed High Speed Paddle Valve, 38'L X 60" Dia., Can Cap. 3554,

Pressure Cooler Shell 2: NB: 1481, SN: 3647-460-67, Can Cap. 611, 38'L X 60Dia.

Shell 3 Atmospheric Cooler: SN: 3447-130-90, Can Cap. 2820, with Auto Luber

FMC JBT Sterilmatic 4 Shell Cooker/Cooler Set 211x400

Item No: 18835-RB

Pressure Cooker Shell 1: NB 2845, SN: 3656-341-90, Duel Infeed High Speed Paddle Valves, 38'L X 60" Dia., Can Cap. 4056, 8503?

Pressure Cooker Shell 2: NB: 2843, SN: 3656-345-90, Can Cap. 3807, 1272?, 38'L X 60"Dia.

Shell 3 Pressure Cooler: NB: 2844, SN: 3656-346-90, Can Cap. 4056, 8473, 21'L X 60" Dia.

Shell 4 Atmospheric Cooler: SN: 3656-88-90, Can Cap. 3556, 1913, 38'L X 60" Dia.

With Square D controls and Allen Bradley Chart Recorders, Includes Auto Oiler

FMC JBT Sterilmatic 4 Shell Cooker/Cooler Set 211-400

Item No: 18832-RB

Pressure Cooker Shell 1: NB 2842, SN: 3656-344-90, Duel Infeed High Speed Paddle Valves, 38'L X 60" Dia., Can Cap. 3807, 1282,

Pressure Cooker Shell 2: NB: 2840, SN: 3656-342-90, Can Cap. 3807, 38'L X 60" Dia. ,

Shell 3 Pressure Cooler: NB: 2841, SN: 3656-343-90, 20'L X 60" Dia.

Shell 4 Atmospheric Cooler: SN: 346-101-17, MFG: 2018 , Can Cap. 3320, 37'L X 60" Dia.

Square D controls with Allen Bradley Chart Recorders, Includes Sloan Automatic Oiler System

ALLPAX Production Retorts

Model #: 1400MM Gentle Motion Agitation, Spray.
Item No: 18738-RB

5 Horizontal Stainless Steel Retorts, 1400mm Dia. 6 basket capacity (5 Baskets while gentled motion is being used) .  Equipped with Gentle Motion Agitation and Spray headers for flexible reportable packages.  Also included is a Allpax Robotic retort crate loading and unloading system.  Retort crates are manually loaded into retorts by the ALLPAX retort operator.

Retort # 1

    NAB # 119, MAWP 75 psi. @ 325 F, Serial # 1110117AX2, Year 2011

Retort # 2 

    NAB # 118, MAWP 75 psi. @ 325 F, Serial # 1110117AX2, Year 2011

Retort # 3 

    NAB # 120, MAWP 75 psi. @ 325 F, Serial # 1110117AX3, Year 2011

Retort # 4 

    NAB # 121, MAWP 75 psi. @ 325 F, Serial # 1110117AX4, Year 2011

Retort # 5

    NAB # 156, MAWP 75 psi. @ 325 F, Serial # 140129AX, Year 2014

    

HUGHES Fresh Corn Cutter

Model #: 037-5135
Item No: 18712-CTR

Hughes fresh market corn cutter removes the corn kernels from husked corn for commercial use as fresh or frozen product.  This is a hand feed cutter capable of handling 100 ears of husked sweet corn per hour depending on operator capabilities.  The husked cobs cobs are placed on a conveyor the kernels are removed by 6 rotating blades that precisely cut the kernels from the cob.  The kernels fall through an opening in the bottom of the cutting chamber and the cobs are ejected out the side into a tote.  

  • Capacity approximately 100 husked ears per minute depending on operator

  • Dimensions 62" long X 44" wide X 55" Heigh

  • Utility Requirements 230 Volt Single Phase, 1-2 gal. water per minute

  • Stainless steel construction except for cutting head and drive assembly 

  • E- Stop Equipped

  • Simple operator controls 

  • On casters 

Urschel Translicer

Model #: TRS-2000
Item No: 18697-ULI

URSCHEL Translicer

Model #TRS-2000

Serial # 212

Year: 2001

Motor: 3 HP 460

Stainless Steel Frame on Casters

Custom Designed and Fabricated Hopper Auger Conveyor

Item No: 18694-M

  • Stainless steel construction

  • 8" Screw

Safeline Metal Detector with Incline Conveyor

Item No: 18688-M

  • Aperture 24"W X 6"T

  • Incline conveyor blue rubber belt

  • 23"W X 14'L

Stephan Microcut MCH

Model #: MCH20K
Item No: 18682-M

  • The STEPHAN Microcut Machines are compact and easy to use. The unique Microcut principle allows fine cutting and emulsifying processes in one machine.

  •  They handle almost all the tasks involved in the production of meat emulsions for sausage production, fine pate, puree and similar fine and smooth products in the meat and convenience industry.

  • Vol 440 60HZ

  • MFG: 2012 

Urschel Comitrol 2100

Model #: 2100
Item No: 18661-M

  • With stainless steel hopper and stand

  • 3Hp upper hopper agitator

  • 7.5 lower feed screw

  • 40HP 50/60 Hrtz

  • Stainless steel construction

adapt.a.ramp Mobile Truck Ramp

Model #: M35000
Item No: 18646-M

  • Load capacity: 35,000LBS  

  • Mild steel painted construction

adapt.a.ramp Mobile Truck Ramp

Model #: M35000
Item No: 18643-M

  • Load capacity: 35,000LBS

  • With hitch attachment  

  • Mild steel painted construction

ShuttleBin 330

Model #: 330
Item No: 18634-M

  • Outer Dimensions 48"L X 40"Wide X 32"Tall

  • Interior dimensions 44"L X 36"W X 26"Tall

  • Collapsible height 11 1/2"

  • Nestable 

Strapping Tool Cart

Item No: 18631-M

  • Strapping cart with plastic banding material

  • Battery powered ZAPAK banding tool with (2) Bosh batteries and charger

Pallet Jack

Model #: HJ 5500
Item No: 18628-M

  • Capacity: 5,500LBS  

Pallet Jack

Model #: HJ 5500
Item No: 18625-M

  • Capacity: 5,500LBS  

Cousins Packaging Pallet Wrapper

Model #: LPSW-A
Item No: 18622-M

  • The Switch Semi2auto

  • 115 Volts, 12 Amps, 1 Phase

Sort Table Round

Item No: 18619-M

  • 48"Diameter X 29"Tall  

  • Equipped with variable speed control

  • Stainless steel construction 

Reynolds Vegetable Peeling Machine

Model #: SS430G
Item No: 18616-M

  • Capacity: 30LBS.

  • 3/4 HP 115 volt 60 Hz, 1 phase, 13 amps

  • Contract number: DLA-400-82-C-1549

  • abrasive in good condition

  • stainless steel construction

Stainless Steel Live Bottom Hopper

Model #: S33467-03B
Item No: 18613-M

  • Takeaway conveyor is 12"W X 14'L X 55" Discharge height

  • Hopper 7'L X 40"W X 38"Deep

  • White plastic modular belt

Crown Electric Power Jack

Model #: WP3035-45
Item No: 18610-M

  • Capacity: 4,500LBS

  • Electric

Cardinal Skid Floor Scale

Model #: 190
Item No: 18607-M

  • Floor Level Pallet Scale 

  • Stainless Steel Construction

  • Digital Readout 

  • 5,000 lb. Cap.


UWE Bench Scale

Model #: FS-60ii
Item No: 18595-M

  • Stainless steel

  • Washdown bench scale

  • Cap: 60KG / .02KG

  • Digital Readout

Quadro Ytron ZC with Super Sack Unloader

Model #: Ytron ZC
Item No: 18592-M

  • High shear single-pass powder wetting and dispersing system

  • MFG: 2016

  • FormPak SN: 1758600097 Bulk Bag System

  • Mild Steel Super Sack System

  • Quadro Mill Stainless Steel Contact 

Waukesha SPX Positive Displacement Pump

Item No: 18577-M

  • Hopper with screw feed

  • Hopper 32"L X 30"W X 22"Deep

  • Duel feed 10" screws

  • Waukasha PD Pump 2" in 2" Out Stainless Steel Contact 

Urschel Comitrol 2100

Model #: 2100
Item No: 18568-M

  • impeller Moter 40 Hp

  • Feed screw 5 Hp

  • Agitator 2 Hp

  • Stainless Steel Construction 

CMP Tote Dumper

Item No: 18565-M

  • All stainless steel

  • MFG: May 2016

  • 600 Volt

Cintex Autosearch Metal Detector with Conveyor

Model #: IL
Item No: 18562-M

  • Metal detector aperture 4"H X 38"W

  • Conveyor is stainless steel construction

  • Conveyor 36"W X 6'L

  • 250 Volt, 30 amp, 2 pole 3 wire

3M Matic A20 Case Sealer

Model #: A20
Item No: 18559-M

  • Type: 10700

  • Part Number: S7710000000A

  • MFG: 2013

  • 120V, 2 amps, 1 phase, 60Hz

  • Top and bottom tape dispenser

Skyjack Electric Man Lift

Model #: SJPI-25
Item No: 18556-M

  • Mach. Weight 1,474LBS

  • Capacity: 300LBS

  • Platform Height 25'

  • Voltage 12V DC

  • Lift Pressure 2,350PSI

  • MFG: 11/1999

Hitachi Ink Jet Printer

Model #: PB-260U
Item No: 18553-M

  • Nozzle size: 65um

  • Max. Number of lines: Up to 2 lines

  • Maximum number of characters per line: 1 Line up to 120 characters, 2 Lines up to 60 characters

  • Maximum print rate: Up to 821 characters (Font 5 x 7, space 1, 1 line)

  • On stainless steel stand 

Hitachi Ink Jet Printer

Model #: PB-260U
Item No: 18550-M

  • Nozzle size: 65um

  • Max. Number of lines: Up to 2 lines

  • Maximum number of characters per line: 1 Line up to 120 characters, 2 Lines up to 60 characters

  • Maximum print rate: Up to 821 characters (Font 5 x 7, space 1, 1 line)

  • On stainless steel cart

Custom Designed and Fabricated Produce Wash Tank with Takeaway Conveyor

Item No: 18547-M

  • Conveyor is liftable for cleaning

  • Unit is 116"L X 32"W X 36"Depth on tank

  • White Modular belt with 1/2" cleats

  • Stainless steel construction

Mueller Porta Tank 435 Gallon

Model #: 435 Gallon
Item No: 18544-M

  • Design pressure 35 PSI

  • Design Temp 100F

  • Test pressure 53 PSI

  • Volume .176 CU FT

  • Medium None/Glycol

  • Stainless steel construction

Mueller Porta Tank 435 Gallon

Model #: 435 Gallon
Item No: 18541-M

  • Design pressure 35 PSI

  • Design Temp 100F

  • Test pressure 53 PSI

  • Volume .176 CU FT

  • Medium None/Glyco

  • Stainless steel construction

CMP Dewatering Auger

Model #: PG 161108
Item No: 18538-M

  • Stainless steel construction

  • 10" Dewatering auger X 7'L

  • 115/230 Volt, 1HP motor

Odenberg Spray Washer 13

Model #: 13
Item No: 18532-M

  • Stainless steel construction

  • MFG: 2013

Odenberg / TOMRA Orbit 450 Steam Peeling Machine

Item No: 18526-M

Infeed Conveyor

  • Stainless Steel Construction

  • 18"W X 164"L X 160" Discharge height

  • Black solid rubber belt with 3" flights

  • Has a hopper for tote dumper loading

Steam Peeler

  • TOMRA Orbit 450

  • SN: 063P

  • MFG: 2013

Vessel

  • 350 PSI AT 437F

  • MAX ALLOW. 0F AT 350PSI

  • SN: 12352

  • MFG: 2-2013

  • NB: 1040

  • CRN: T4433.4

  • Vessel is mild steel

Discharge Auger

  • Stainless steel auger incline conveyor

  • 16" Auger X 11'L X 86" Discharge height

Accumulator

  • SN: 13047

  • MFG: 3-2013

  • NB: 1045

  • 350PSI AT 650F max allow. working pressure

  • -20F AT 350PSI min. design metal temp

Exhaust Tank

  • Odenberg Type ET

  • SN: 1556855

  • Part number M2962040

  • MFG: 2013

  • PS 0,5 bar

  • TS Max 140C

  • TS min -C

  • Pt 1 bar

  • V 3000 L

  • Group of fluid 2

  • Date of test 1/2013

Accumulator

  • NB# 1045

  • 350 PSI @ 650 F Max working pressure

  • S/N 13047 

  • MFG: 3-2013

Custom Metalcraft Tote Dumper

Model #: H-2
Item No: 18523-M

  • All stainless steel

  • MFG: 02-1990

  • 480 volt

4 Station Inspection & Trim Conveyor

Item No: 18508-M

  • Stainless steel construction

  • White modular belt

  • 24"W X 189"L X 36" Discharge height

  • 2 E-stops

  • 4 Sorting stations

  • 208V

Stephan Microcut MCH

Model #: MCH20K
Item No: 18502-M

  • The STEPHAN Microcut Machines are compact and easy to use. The unique Microcut principle allows fine cutting and emulsifying processes in one machine.

  •  They handle almost all the tasks involved in the production of meat emulsions for sausage production, fine pate, puree and similar fine and smooth products in the meat and convenience industry.

  • 120 liter hopper

  • 1200 Kg/Hr. capacity (Depending on Product)

  • 3600 Rpm @ 60Hz

  • Motor 160-M-2A, 15 KW, 60 HZ, A 48,5, 

  • MASSCH. NR. 722.381.01

  • 220V, 230V 3 Phase 

Wulftec Automatic Strech Wrapper

Model #: WCA-200
Item No: 18493-M

  • Inline top sheet applicator overhead gantry

  • Fully automatic

  • Pallet turntable 

  • Pallet handling conveyor 

Wolftec Automatic Strech Wrapper

Model #: WCA-200
Item No: 18490-M

  • Inline top sheet applicator overhead gantry

  • Fully automatic

  • Pallet turntable 

  • Pallet handling conveyor 

Taptone 500

Model #: T-500-CMS-P
Item No: 18484-M

  • Container inspection system

  • 2,000 containers/min capacity

  • Touch screen interface

  • Stainless steel housing 

Scantrac X-Ray Imaging System inspx

Item No: 18481-M

  • Metal container inspection system

  • Auto rejection

  • Touch screen operator interface

Mateer Burt Roll Through Labler

Model #: 408-D
Item No: 18478-M

  • Hydraulic label feed

  • Set can size: 300 X 407 3 piece can

  • Valco glue pot

ALVEY 910 Case Palletizer

Model #: 910
Item No: 18475-M

  • Alvey 910 Case Palletizer

  • Model # 910

  • Serial # 01-K664118

  • Project # KG32 

  • Year Of MFG : 2002

  • Allen Bradley 505 Processor

Alvey 880 Palletizer

Model #: 880
Item No: 18472-M

The Alvey 880 Series Palletizer offers a simple, heavy duty design for low maintenance and high reliability. It handles up to 45 cases per minute -- or up to 60 cases per minute with the optional layer accumulation table. A unique graphic touch screen operator interface, which provides set-up and diagnostic information, is conveniently located at platform level. The 880 is sized to accommodate a wide variety of products, tiersheets, slip sheets and pallets.

  • Project number: K664

  • MFG: 1995

  • Allen Bradley 505 Processor 

Scantrac X-Ray Imaging System inspx

Item No: 18469-M

  • Metal container imaging system 

  • Up to 2,000 containers/min

  • Auto rejection

  • Touch screen operator interface 

  • Stainless steel construction

Taptone 500

Model #: T500 CMS-P
Item No: 18466-M

  • Container inspection system 

  • 2000 containers/min capacity

  • Touch screen interface

  • Stainless Steel housing

Krones Canmatic

Model #: 073-P12
Item No: 18463-M

  • Wrap around pre-cut paper labelling machine

  • 5 oz 208 X 208 aluminum cans

  • MFG: 2001 

Metalcraft Column Dumper

Model #: 4F06058800
Item No: 18460-M

  • Stainless steel construction

  • Dump height 88"

  • Mast height 120"

  • MFG: 2011

Crepaco Single Shaft Ribbon Blender

Model #: FB
Item No: 18454-M

  • Single shaft ribbon agitation

  • Stainless steel construction

  • Jacketed

  • Hydraulically powered

  • Tub size: 4'W X 4'D X 6'L

Mepaco ThermaBlend 170

Model #: ThermaBlend 170
Item No: 18451-M

  • 2,500 lb. capacity

  • Dual ribbon agitation

  • Dual end discharge

  • Tub size: 5' W X 7' L X 32" D

  • All stainless steel construction

Mepaco ThermaBlend 170

Model #: ThermaBlend
Item No: 18448-M

  • 2,500 lb. capacity

  • Dual ribbon agitation

  • Dual end discharge

  • Tub size: 5'W X 7'L X 32"D

  • All stainless steel construction

Weiler 11" Auto Grinder

Model #: 1109AG
Item No: 18445-M

  • Heavy duty self feeding grinder

  • Hopper is equipped with paddle style agitator

  • Stainless steel fluted barrel and screw

  • All stainless steel construction

RMF Incline Auger Conveyor

Item No: 18442-M

  • All stainless steel

  • 16"Diameter screw X 22'L X 11'Discharge height

Mepaco ThermaBlend 170

Model #: 170
Item No: 18436-M

  • 4,000 lb. capacity

  • Dual shaft agitation

  • Duel end discharge

  • Hopper is 90"L X 60"W X 40"Deep

  •  Jacketed 100PSI @ 350F

  • MFG: 2002

  • R stamp tag 1367 2009

Custom Designed and Fabricated Incline Auger Conveyor

Item No: 18433-M

  • 20" Auger

  • 16'L X 14'Discharge height

  • All stainless steel

Custom Designed and Fabricated Incline Auger Conveyor

Item No: 18430-M

  • 12" Auger

  • 13'L

  • Discharge height 84"

  • All stainless steel

Weiler 16" Grinder

Model #: 1668
Item No: 18427-M

  • 100 HP mounted below grinder

  • Stainless steel frame

  • Stainless steel hopper

  • Galvinized fluted barrel and screw

    

Custom Designed and Fabricated Incline Auger Conveyor

Item No: 18424-M

  • 20'L X 12" Diameter Auger X 12' Discharge Height

  • Stainless steel construction

RMF Duel Auger Unloader

Model #: 14853
Item No: 18421-M

  • Duel 12" Augers

  • 15'L

  • Discharge height 42"

  • Stainless Steel Construction

Rietz RE-24 Extructor

Model #: RE-24-K7E333
Item No: 18418-M

  • Mild steel frame

  • Offset gearbox

  • Tin plated screw

  • 75 HP motor

Mettler Toledo Metal Detector

Item No: 18415-M

  • Safeline

  • Inline metal detector

  • Aperture is for a 4" pipe

Wolfking Hopper / Pump Feeder

Item No: 18412-M

  • Stainless steel conical feed hopper 

  • Waukasha SPX PD pump 4" in 4" out 

  • Stainless steel pump head 

Weiler Grinder

Item No: 18409-M

  • Tin plated hopper and screw

  • 100 Hp motor

  • Stainless steel frame 

RMF Tote Dumper

Model #: 100
Item No: 18406-M

  • All stainless steel

  • 48" X 48" Totes

  • Dump height of 67"

A1 Column Dumper

Model #: A24-122
Item No: 18403-M

  • V mag cart dumper 

  • 6' dump height 

  • 7' overall height 

  • Stainless steel construction

Mettler Toledo Metal Detector

Model #: BAH/26X15/SS/100-300/HD
Item No: 18400-M

  • Safeline

  • Rubber belt conveyor 10'L X 24"W

  • Aperture is 26"W X 15"H

  • Stainless steel contact

  • Washdown capable

Rietz Dual Ribbon Blender

Model #: RS-28-K3410
Item No: 18397-M

  • All stainless steel   

  • MFG: 1978

  • Dual ribbon, end discharge

  • Inside blender dimensions 10'L X 60"W X 36"Deep

Rietz Dual Ribbon Blender

Model #: RS-28-K3410
Item No: 18394-M

  • All stainless steel   

  • MFG: 1978

  • Dual ribbon, dual end discharge

  • Inside blender dimensions 10'L X 60"W X 36" deep

Cozzini Stainless Steel Screw Loader with 650 Pump

Model #: CSLH 5000-2
Item No: 18391-M

  • MFG: 02/2016

  • Unibloc pump

Cozzini Stainless Steel Combo Tote Dumper

Model #: CVD6101
Item No: 18388-M

  • All Stainless Steel

  • Tote Size : 48" X 48"

  • Capacity : 3000 #

  • Pivot Point 89" High

  • MFG: 2016

Vemag Cart 400lbs.

Item No: 18385-M

  • Stainless steel cart

  • 400 lbs.

  • Inside dimensions 25"W X 25"L X 29"Deep

Custom Designed and Fabricated Spiral Conveyor

Item No: 18376-M

  • 11' Tall

  • Set for 208 x 208

  • Stainless steel construction 

Custom Designed and Fabricated Spiral Conveyor

Item No: 18373-M

  • 11' Tall

  • Set for 208 x 208

  • Stainless steel construction

APV Crepaco Liquiverter 200 Gallon

Model #: 200 Gallon
Item No: 18358-MSC

  • 36"W X 36"L X 32"Deep square body single wall mixer vessel

  • New center bottom high-shear impeller with all new seals

  • 2.5" Bottom side outlet with sanitary threaded connection

  • Top center manway with hinged cover

  • Sanitary threaded top inlet

  • Adjustable threaded stainless steel foot pads on stainless steel legs.

  • All food grade USDA sanitary stainless steel construction

  • 25HP 3 phase direct drive motor powers the impeller

FMC Piston Filler

Model #: C210
Item No: 18355-M

  • Model # C-210

  • 21 Valve Piston Filler

  • Stainless steel contact 

  • 211 X 400 11 oz. fill

Rietz Stainless Steel Screw Loader

Model #: C-12-K7208-6
Item No: 18349-M

  • 12" Screw

  • Discharge Height 67"

  • Stainless Steel Construction 

Custom Designed and Fabricated Column Lift

Item No: 18346-M

  • Built to dump V-Mag style carts

  • Floor height loading 

  • 35 Degree dump angle 

  • Dump Height 96"

  • Overall height 125"

  • 304 stainless construction 

Cozzi Auger Loader

Model #: CSLO 5000-5
Item No: 18343-M

  • Hopper size 60"L X 54"W X 72" T

  • 18" diameter auger discharge, 72"L, 50" discharge height 

  • Year of MFG: 11/2012

  • All Stainless Steel Construction 


Metler Toledo Inline Pipe Metal Detector

Item No: 18340-M

  • 4" Pipe 

  • Washdown Construction Stainless Steel 

Angelus Can Seamer 100-L

Model #: 100L
Item No: 18337-M

  • Can size 300 x 407 

  • Steam flow 

  • Straight line infeed

  • Auto lubrication 

  • Vibratory lid feed shoot

  • Base is in excellent condition no pitting 

Meter Toledo Hi-Speed Checkweigher

Model #: XS Highspeed
Item No: 18331-M

  • Washdown construction stainless steel frame 

  • Touch screen operator interface 

  • Rejection pusher and station 

Incline Screw Conveyor

Item No: 18322-M

  • Screw 12" diameter, 16' long, 72" discharge height 

  • Stainless steel construction 

Olney Rotary Bean Washer

Item No: 18316-M

  • Rotary reel is 36" diameter, 48" long

  • Stainless steel construction 

  • Recovery pan sloped to 2" drain 

Olney Bean Destoner

Model #: 24" Destoner
Item No: 18313-M

  • Stainless steel ripple pan 24" wide 60" long 

  • Stainless steel tri-clover pump 2" in and out 

Metler Toledo Inline Metal Detector

Item No: 18307-M

  • Stainless steel inline pipe 4" diameter

  • Wash Down Construction 

Waukesha SPX Positive Displacement Pump

Model #: 220
Item No: 18304-M

  • Stainless steel positive displacement pump

  • 4" sanitary fitting on in and out 

  • Mounted on base

Lee Kettle 1000 Gallon

Model #: 1000-D9MS
Item No: 18301-M

  • Hemispherical stainless steel kettle New 2002

  • 1,000 gallon capacity

  • NAB # 9031

  • Max working pressure 58 Psi @ 305 Degrees 

  • Duel motion scrap agitation scrappers and pins are missing 

  • Split two part lid attached to bridge 

  • Lee kettle valve 4"

  • Stairs and operator platform surround kettle and is included 

Walker 300 Gallon Likwifier

Model #: 300-BDS
Item No: 18292-MSC

  • High-shear agitation to dissolve, emulsify, disperse  solids and semi-solid ingredients in liquids

  • 48" X 48" X 30"Deep single wall square body blender vessel

  • 2.5" bottom side outlet with Tri-Clamp connection

  • Bottom mounted hi-shear agitator

  • 19" X 20" top hinged manway cover

  • 78" infeed height, 31" discharge height CIP ball in mixing vessel

  • Impeller and drivetrain including bearings, bearing housing, belts, pulleys

  • 30 HP 3 phase belt drive motor

Custom Designed and Fabricated Inspection Conveyor 12'L X 24"W

Model #: 12'L X 24"W
Item No: 18277-VO

  • NEW FOOD GRADE FRUIT AND VEGETABLE INSPECTION CONVEYOR

  • A single level conveyorized food process inspection table with a 12'L X 24"W conveyor belt running between 9 foot long UHMW plastic work surfaces.

  • Ideal as a trim line for fruit and vegetable inspection, trimming, coring, sorting, and rework

  • Sized for six workstations

  • Solid interlocking plastic chain type conveyor belt running between 1 3/8" high stainless steel sides.  

  • High density plastic work shelves, 9"W X 9'L  

  • Work surfaces and inspection belt at a 37 inch working height on adjustable height feet (adjustable for approximately 32" to 40").  

  • Gasketed PVC control box with on / off buttons and variable speed control  adjustable for up to 45 feet per minute.

  • All food grade stainless steel construction

Custom Designed & Manufactured 10' Wide Unloading Conveyor

Item No: 18256-MSC

  • Stainless steel construction

  • Overall dimensions 140"L X 140"W X  90"H

  • Spider style conveyor

  • Was previously used for unloading green beans from large bins

  • Blue poly belt

Buhler Aeroglide Dryer

Item No: 18244-MSC

  • 10'W X 41'L

  • Controls are included

  • Rigging fees are not included

Custom Stainless Steel Vegetable Washer

Item No: 18238-WSH

  • 5'W X 21'L X 32"D

  • 4' Rexnord belt elevating conveyor

  • 10 HP pump

  • All stainless steel construction

Urschel OV

Item No: 18232-ULI

  • .5HP 208/230V 3 phase stainless steel motor

  • All stainless steel construction

Urschel OV

Item No: 18229-ULI

  • .5HP 208/230V 3 phase stainless steel motor

  • All stainless steel construction

Hughes Fresh Market Corn Cob Cutting Line

Item No: 18226-MSC

  • Fresh curt cob line capacity estimated @ 2-3 tons per hour depending on feed rate and quality of product

  • Line consisting of the following equipment 

  • Hughes product conveyor 20' L x 18" W, stainless steel construction

  • Hughes cob feed shaker orienter to fresh market husker 10' L X 20" W

  • Hughes Husker Fresh Market 2 Lane

  • Hughes fresh market cob saw 

  • Includes platforms and controls 

Urschel Slicer OV

Model #: OV
Item No: 18223-ULI

  • 1/4" Cut head

  • Mild Steel Painted Frame

Urschel Dicer J9-A

Model #: J9-A
Item No: 18220-UD

  • Set: 3/8"

  • Stainless Steel Construction

Spin Dryer - Used

Item No: 18217-SPN

  • Stainless steel dryer includes basket

  • 32 gallon plastic perforated removable basket

Urschel G-A Dicer

Model #: G-A
Item No: 18205-UD

  • 2 HP motor, 230/460

  • Stainless Steel Frame

HMI Heinzen SB100 Auto Batch Dryer

Item No: 18184-WSH

  • Automatic centrifugal spin drying system for high volume drying of fresh cut produce (iceberg lettuce, spring mix, baby spinach, shredded carrots, cabbage slaw, chopped romaine, leafy products...).

  • Includes Z-shaped feed conveyor 12"W with a fine woven belt to allow water to pass through. It is configured with a 16" horizontal infeed, 150"L incline section and a 5' long discharge.  

  • 13 Cubic foot (30"Dia. X 32"Deep) stainless steel drum / dryer basket. Perforations are 5/32"Dia. round holes. Dryer basket has a clean unobstructed interior without spokes or axles in the product zone.

  • Air assisted product transfer and discharge

  • Central lubrication system

  • Stainless steel control box with Allen Bradley PLC control system. Systems includes touch screen operator control panel. This allows for quick product changeover by presetting hold times and other parameters for multiple products

  • All food grade stainless steel construction

A.K. Robins Pickle Spear Cutter

Model #: 82
Item No: 18151-MSC

  • Stainless steel frame

  • Roam rollers and fixed cutting head

  •  Adjustable legs

  • 208 - 230 / 460 Volts, 3.2 -3 / 1.5 Amps, 1 HP motor  

Urschel CC-D Slicer

Model #: CC-D
Item No: 18145-ULI

  • 1/4" shred assembly

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

Urschel CC-D Slicer

Model #: CC-D
Item No: 18142-ULI

  • 1/4" shed assembly

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

Commercial Air Cleaner

Item No: 18139-MSC

  • 60"W X 95"L X 57"H discharge feed shaker with removable screens

  • Screen slots are 1/8"W X 1 1/4"L

  • Ajax shaker with 2 HP motor

  • Stainless steel construction

Urschel CC-D Slicer

Model #: CC-D
Item No: 18109-ULI

  • New 2001

  • 1/4" shred assembly included 

  • 10 HP motor 460 Volt, 3 phase

  • Stainless steel construction

  • Includes merchant Scmidt stainless steel stand on casters

Urschel CC-D Slicer

Model #: CC-D
Item No: 18106-ULI

  • 1/4" shred head assembly included

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

  • Includes Merchant Schmidt stainless steel stand on casters

Thermo Scientific Metal Detector

Model #: Apex300
Item No: 18004-MSC

  • 6" aperture 

  • Drop through metal detector with 2-way diverter and remote operator controller

  • Stainless steel master control cabinet 

  • Class II, Division 2, Group G Classification 

FMC / JBT Sterilimatic 603 X 700 3 Shell Cooker Cooler System

Item No: 17983-MSC

  • FMC Pressure Cooker, 1224 can capacity

  • Set: 603 x 700

  • Serial  # 3624-40-60

  • PSI 33 #


  • FMC Standard Pressure Cooler, 336 can capacity

  • Set: 603 x 700

  • Serial # 3624-41-60

  • PSI 33 #


  • FMC Atmospheric Cooler, 912 can capacity shell

  • Set: 603 x 700

  • Serial # 3624-19-60

Vanmark Hydrolift Destoner

Item No: 17974-MSC

  • 6'H X 24"Dia. stainless steel hydrolift destoner

  • 60"W bottom hopper

  • 480V, 3 Phase  

Cornell 10" Food Pump

Model #: 10NHPP-F12K
Item No: 17962-PMP

  • New condition 

  • Mild steel valute and impeller

  • No motor, pulley or guard

Cornell 10" Foods Pump

Item No: 17959-PMP

  • 50HP motor

  • Mild steel valute and impeller

Rietz Extructor RE-15-K7E328

Model #: RE-15-K7E328
Item No: 17953-EXT

  • Model Model # RE-15-K7E328

  • Serial # 95000911

  • Year 1995

  • 15 HP Motor 230/460 Volt, 1750 RPM

  • Stainless Steel Frame

ABCO Steam Belt Blancher

Model #: B187ABBNT
Item No: 17947-BL

  • Stainless steel construction

  • Overall dimensions: 200" x 73" x 125"

  • Electric drive

  • 25,000 lbs. per hour

  • No Controls

Vanmark Hydrolift

Item No: 17938-MSC

  • 12'H X 24"Dia. stainless steel hydrolift destoner

  • 58"L X 24"W bottom hopper

  • Top mounted chute 

  • Stainless steel construction 

Hughes Cob Saw

Model #: B193SURIH
Item No: 17926-MSC

  • Designed for cutting off the tips and tails or cutting various sized cobbettes

  • Can be used for processing husked or unhusked corn

  • Capable of cutting other products such as carrots, celery, peppers and zucchini

  • Heavy duty stainless steel frame

  • Unit is 16'L x 5'W

Lyco Pouch Pasteurizer Cooler System

Model #: 8600
Item No: 17914-MSC

 Rotary Drum Pouch Pasteurizer

  •  72" X 16' 

  • One way lifting lid

  • 3 Hp Nord Gear Box and Motor 230/460 Volt 3 Phase

  •  Last running 1lb. pouch @ 1,500 lb./Hr. with 45 minute cook time

  •  New 2010

          Rotary Drum Pouch Cooler 

  • 72" X 12' 

  • One way lifting lid

  • 3 Hp Nord Gear Box and Motor 230/460 Volt 3 Phase


Hughes Blancher

Model #: 02-1471
Item No: 17911-BL

  • Reel size: 48"W x 12'L 

  • Screen perforation 1/8" 

  • Stainless steel construction 

Magnuson 12 Roll Brush Washer

Model #: SP2123-375007.0107
Item No: 17845-MSC

  • Hydraulic drive and power pack 

  • Stainless steel construction

Key Tegra 7775 Color Sorter

Model #: 7775 603593-1
Item No: 17827-MSC

  • Year: 2006

CCM Corn Cutter

Model #: SC8402-L
Item No: 17818-MSC

  • Designed to gently and automatically orient and feed cobs to an aperture-like cutting head which automatically adjusts to the size and taper of the cob as it cuts.

  • Feed system is designed to automatically remove cobs which are too small, and to attempt to clear cutting head jams without operator intervention.

  • Manufacturer rates for 110 to 130 ears per minute (average rate).

  • Food grade sanitary stainless steel construction

  • Hydraulically powered, with an  approximately 10 gpm hydraulic requirement.

  • Uses water to keep the at a rate of  7 approximately 7 gallons per hour, to lubricate the cutting head.

  • 16" wide x 20" long infeed belt leading to a 27" diameter sorting bowl for orientation (the "L" in the model number designates "Large bowl".

  • 40" long cob feed belt with reject. Separate 24" diameter sorting bowl. 6' high infeed and 32" high kernel discharge, 42" high cob discharge.

  • Hydraulic power pack (pump and reservoir system) required / not included

Damrow Brothers Horizontal Screw Cooker

Model #: Single Screw
Item No: 17812-CK

  • Approx. 12" Dia. X 10' L long screw

  • Cooker features steam injection

  • Approx. 4" X 7" end discharge

  • Mounted on stainless steel stand

  • Hinged lid

  • 5 HP electric motor

  • Stainless steel

Key Manta Color Sorter

Model #: Manta 2030F A-604184-1
Item No: 17806-MSC

  • Equipped with G-6

  • (2) Top IR lasers and (3) Top viewing cameras

  • Wet CIP system

  • Touch screen operator interface

  • Year 2008

Key Manta Color Sorter

Model #: Manta 2030F A-604162-1
Item No: 17803-MSC

  • Equipped with G-6

  • (2) Top IR lasers and (3) Top viewing camera

  • Wet CIP system

  • Touch screen operator interface

  • Year 2008

Key Tegra 7775 Color Sorter

Model #: 7775 602226-1
Item No: 17773-MSC

  • Equipped with G-6

  • (2) Top Cameras 

  • Product stabilizer

  • Touch screen operator interface

  • Wet CIP System 

  • Year: 2001

Key Tegra Color Sorter

Model #: 7775
Item No: 17770-MSC

  • Equipped with G-6

  • (2) Top and (2) Bottom cameras

  • Touch screen operator interface 

  • Wet CIP system 

  • Year: 2004

Rietz RE-24 Stainless Steel Extructor

Model #: RE-24-K9E943
Item No: 17755-EXT

  • Model: RE-24-K9E943

  • Chain to sprocket with 75 HP Motor

  • Stainless Steel Frame

  • 37"L x 30"W x 41" Deep stainless steel product hopper

  • Year: 1993


FMC 4 Shell Sterilimatic 300 x 407 Cooker Cooler System

Item No: 17746-CK

  • 1st Shell FMC Pressure Cooker: 3,024 can capacity, Set: 300 x 407, serial # 364231499, PSI 33 #, NB # 3093

  • 2nd Shell FMC Pressure Cooker: 2,856 can capacity, Set: 300 x 407, serial # 3635-33-47, NB # 11

  • 3rd Shell FMC Pressure Cooler: 798 can capacity, Set: 300 x 407, serial # 3635-34-47, NB # 12

  • 4th Shell FMC Atmospheric Cooler: 2,226 can capacity, Set: 300 x 407, serial: 3442-130-84

Lyco Hydrosieve

Item No: 17737-MSC

  • Screen Dimensions: Approx. 24"W x 29"L

  • Serial: STS 0307 48673

  • Screen Size: .125

Lyco Hydrosieve

Item No: 17734-MSC

  • Screen Dimensions: Approx. 24" W x 29" L

  • Serial: STS 0307 48671

  • Screen Size: .125

Lyco Hydrosieve

Item No: 17731-MSC

  • Screen Dimensions: Approx. 24" W x 29" L

  • Serial: STS 0307 48674

  • Screen Size: .125

Lyco Hydrosieve

Item No: 17728-MSC

  • Screen Dimensions: Approx. 24" W x 29" L

  • Serial: STS 0307 46672

  • Screen Size: .125

RIETZ RE-15 Extructor

Model #: RE-15K7E328
Item No: 17725-EXT

  • Model: RE-15-K7E328

  • Serial: 740623

  • 40 HP 230/460V, 3 Ph motor

  • Stainless steel contact points

Lyco Hydrosieve

Item No: 17722-MSC

  • Screen Dimensions: Approx. 36" W x 29" L

  • Serial: STS 0307 48669

  • Screen Size: .125

Key Optyx 3755 Color Sorter w/ G6 Pkg.

Model #: O3109537
Item No: 17653-MSC

  • Year: 2012

  • No in-feed shaker

Arrowhead Systems Lowerator

Item No: 17623-MSC

  • Arrowhead Systems Stainless Steel Lowerator

  • Adjustable width up to 11-3/4"

  • 156" intake height and a 36" discharge height

  • Gripper chains are driven by duel 1.5 hp 1755 rpm motors - reduced to 175 rpm

  • Requires 230/460 vac 3 phase electrical supply

MTC Stainless Steel Hydraulic Tote Dumper

Model #: LE
Item No: 17578-DMP

  • MTC Stainless Steel Hydraulic Tote Dumper

  • Model: LE

  • Serial: 4925

  • 4,000# capacity

  • Fits approx. 54” x 50” totes @ 80” Pivot

  • Approx. 29" Loading Height

  • No hydraulic power pack

 


Dunkley Model E Cherry Pitter

Model #: E
Item No: 17563-MSC

  • Dunkley Model E Cherry Pitter

  • Fresh Tart Cherries

  • Oscillating aluminum in-feed hopper

  • Hopper dimensions: 18"W x 11.5" L - In-feed height: 48-1/2"

  • Equipped with an 18" W pocket sweeper brush - helps fully load one cherry per pocket into the pitting drum.

  • Aluminum alloy stone removal drum with 15/16" Dia. (24mm) cherry pockets

  • (53) stainless steel stone removal needles

  • Stainless steel bottom discharge chute with slotted pan

  • Side pit discharge with water flush w/ stainless steel discharge chute

  • Lubrication cluster and oiler

  • Painted steel support frame

  • 1 HP, 3 phase drive motor

  • MFG rated for 1/2 inch (12.7mm) diameter to 13/16 inch (20.7mm) diameter fresh tart cherries, with capacity for up to 1 ton per hour @ approx. 5,088 cherries per minute

Lyco Waste Water Reel

Model #: 48/60
Item No: 17548-MSC

  • Lyco Waste Water Drum/Reel

  • Model: 48/60

  • Serial: DS129919134-1

  • Stainless Steel Construction

  • Louvered Screens On Outer Drum 60" Dia. X 96" L

  • Screen: .045

  • Inner Drum Has Been Removed And Not Included With Unit

  • No Drive With Drum, Main Drive Chain Is Attached With Drum Sprocket

Formax F-26 Patty Former

Model #: F-26
Item No: 17539-MSC

  • Formax F-26 Patty Former

  • 1000 # Hopper-Automatic straight flow feeding

  • Safety guards w/ interlocks

  • Selector switch to raise mold cover for mold plate changes & clean up

  • Selector switch retracts plungers to clean up position

  • Hopper sides flip up for for clean up

  • No mold plates


Rotary Cabbage Coring Machine (NEW)

Item No: 17527-MSC

  • Rotary Cabbage Coring Machine (NEW)

  • 4-Station Continuous Cabbage Corer

  • Manufacturer rated for up to 28 heads per minute

  • Manual head placement on a revolving table

  • Stainless steel product contacts, support frame, & screen shrouds

  • Knives available to cut but leave the core (e.g. for sauerkraut), or to remove the core (e.g. for fresh-cut cole-slaw)

  • 1.5 HP 208/230/460 volt 3-phase motor

Lyco 8700 Cooker/Cooler

Model #: 8700
Item No: 17512-CK

  • Lyco Cooker/Cooler

  • 72" Dia. x 32' L

  • Model: 8700

  • 8' Cook Length / 24' Cool Length

  • Screen Size: 3/8" Perforation

  • Stainless Steel Construction

Ambient Air Cooler

Item No: 17506-BL

  • Ambient Air Cooling Tunnel

  • Belt dimensions: 8’W x 32’L

  • Belt type: Stainless Steel wire mesh



Key Technology Turbo-Flo Blancher

Item No: 17503-BL

  • Key Technology Turbo-Flo Blancher

  • Belt Width: Approx. 8' W

  • Overall Length: Approx. 39' L

  • Belt type: Stainless Steel wire mesh

  • Age: 2004

  • Power: 460VAC/ 90Amp/ 3Ph/ 60Hz

  • Controls: Allen Bradley Micrologix 1000

  • Last blanching diced potatoes



Lyco Cooker/Cooler Model 8900

Model #: 8900
Item No: 17461-CK

  • Size approx. 60" Dam. x 20'L

  • Screen Perforation 1/16"

  • Cooker length: 16'

  • Cooler length: 4'

  • Stainless steel construction

  • No pumps or control panel

  • Missing one drive and gear box

Lyco Dirt Reel Washer

Item No: 17434-MSC

  • Lyco Dirt Reel Washer

  • Rotating drum w/ internal spray

  • Drum Dimensions: 36" Dia x 12' L x 1/4" spacing

  • Serial #: DR 0805 41302

  • 3 HP, 230/460V, 60 Hz, 3 Ph motor


Cornell Food Pump w/ Commercial Vortex Tank

Model #: 6NHPP-F16K
Item No: 17371-PMP

  • Cornell 6NHPP-F16K Food Pump w/ Commercial Vortex Tank

  • Expanded volute cast mild steel pump housing

  • 6" flange inlet/discharge ports

  • Flexible connection between pump and tank

  • All stainless steel tubular support frame and vortex tank

  • Tank measures 42" L x 30" W x 20" Deep

  • Water inlet diffuser/diverter in tank

  • 5 HP 230/460V, 2 Phase belt drive motor w/ mechanical variable speed pulley

Urschel VSC Segment Cutter

Model #: VSC
Item No: 17368-ULI

  • Urschel VSC Segment Cutter

  • Urschel Velocicut 4" Dia. 8-segment Wedge Cut Head

  • Factory stainless steel electrical control panel with safety interlock system

  • Aftermarket VFD within a PVC control box

  • 5 HP, 3 phase motor


Custom Designed & Manufactured Belt Steam Blancher

Item No: 17329-BL

  • 15' L x  30" W belt
  • Continuous steam belt blancher with a 30" wide interlocking plastic chain type belt. (Belt is formulated for high temperatures)
  • 1/16" by 3/4" elongated belt perforations
  • Tunnel --  22" long open in-feed area - feeds into the 15' long enclosed steam tunnel with top and bottom steam injection headers, leading on to a 24" long open discharge section.
  • Complete with water sprays on infeed and discharge
  • 4.5" maximum product clearance under removable top covers.
  • Has a water collection and drain pan on the in-feed end only.
  • All food grade stainless steel product contacts, conveyor and tunnel body, and support frame currently set at a 29" working height.
  • Overall Dimensions: 21' 7" L x 48" W x 43" H
  • 3/4 HP 208 / 230 / 460 volt 3 phase stainless steel motor
  • Fixed speed gear drive set for 45 foot per minute belt speed.
  • No controls or valves
Lyco Hot Water Rotary Reel Blancher

Item No: 17326-BL

  • 48" Dia. x 8' L Drum
  • Perforations: 1/16"
  • In-Feed Height: 60"
  • Discharge Height: 48"
  • Stainless Steel Construction
  • Trunnion Driven Drum: 1 HP, 230/460 V, 3 Ph motor

Rotary Cabbage Coring Machine

Item No: 17272-MSC

  • Rotary Cabbage Coring Machine
  • 4-Station Continuous Cabbage Corer
  • Manufacturer rated for up to 28 heads per minute
  • Manual head placement on a revolving table
  • Stainless steel product contacts, support frame and screen shrouds 
  • Knives available to cut but leave the core (e.g. for sauerkraut), or to remove the core (e.g. for fresh-cut cole-slaw)
  • 1.5 HP 208/230/460 volt 3-phase motor 

Lyco Hot Water Rotary Blancher

Item No: 17260-RT

  • Size: 60" Dia. x 8' L
  • 1/8" Perforations
  • 2-Way Pneumatic Power Assist Cover Lift
  • 44" In-feed Height
  • Ferris-Wheel Discharge w/ discharge chute @ 55" height
  • CIP system w/ 2 spray bars and stainless steel centrifugal pump
  • Trunnion-driven drum w/ 3HP, 230/460V, 3 Ph motor
  • Stainless Steel Construction

Lyco Rotary Drum Cooker/Cooler

Model #: 8900
Item No: 17257-CK

  • Model: 8900
  • 60" Dia. x 12' L
  • 8' Cook / 4" Cool
  • 5/32" drum screen perforations.
  • 2- way pivoting hood with pneumatic cylinder power lift
  • Dimpled (non-stick) stainless steel in-feed and discharge chutes. Built in CIP system including centrifugal pump for sanitation.
  • Stainless steel control panel.
  • Each drum has it's own 3 HP drive, and there is a 7.5 HP drive on the centrifugal CIP pump.
  • All drives are 208/230/460 volt, with 460 volt 3 phase electrical input to the control panel.
  • Food grade USDA sanitary stainless steel construction.
  • Removable access doors in the cooking and cooling reels for clean out.

Freshline 2 Drum Dryer

Model #: 950
Item No: 17185-DR

  • Model # 950

  • Serial # 04041078

  • Accumulation Conveyor

  • In-feed Conveyor

  • Discharge Conveyor

  • Stainless Steel Control Panel

  • Stainless Steel Construction

  • 50 Second fill time

  • Full drum 130 pounds

Marchant & Schmidt MS80 Cheese Cubing Machine

Model #: MS80
Item No: 17173-MSC

  • Marchant and Schmidt MS80 Cheese Cubing Machine
  • Capable of cutting (2) 40 lb. blocks of cheese at one time
  • Fully automated w/ product rates up to 10,000 lbs/hr.
  • Quick change harps
  • Fully enclosed cutting chamber

Dofra Bell Pepper Coring Machine

Model #: PD6000 20044631
Item No: 17164-MSC

  • Dofra Bell Pepper Coring Machine
  • Model: PD6000 20044631
  • Year: 2013
  • 1985 lb. capacity

Dofra Bell Pepper Coring Machine

Model #: PD6000 20044631
Item No: 17161-MSC

  • Dofra Bell Pepper Coring Machine
  • Model: PD6000 20044631
  • Year: 2013
  • 1985 lb. capacity

Lyco Screw Press

Model #: 2000
Item No: 17152-MSC

  • Model: 2000
  • Serial: SP069916615
  • 12" Dia. Screw
  • 10 hp Motor
  • Stainless Steel Construction

Key Iso-Flo Vibratory In-feed Shaker

Model #: 600722-1
Item No: 17140-SHK

  • Key Iso-Flo Vibratory Infeed Shaker

  • Model: 600722-1

  • Serial: 97-29164

  • Shaker Pan Dimensions: Approx. 53" W x 74" L

  • With Approx. 24" L De-watering Screen

  • Leg Height: Approx. 67"

  • Stainless Steel Construction



Key Technology In-feed Metering Valve

Item No: 17113-MSC

  • Key Technologies In-feed Metering Valve
  • (6) baffles - Approx. 18" W x 3-1/4" Deep
  • Approx. 11-1/2" Dia. Discharge

Stock Pilot Rotor 900 Retort

Model #: Pilot Rotor 900
Item No: 17041-RT

  • Stock Pilot Rotor 900 Lab Retort
  • Model: Pilot Rotor 900
  • Year: 1992
  • The Pilot Rotor is able to perform all known heat sterilization methods. All containers or other packages can be processed in the static or rotary mode, axial or "end-over-end".
  • Rotation is clockwise or with alternating sense, continual or in intervals.
  • The Pilot Rotor 900 is suitable for the development and testing of new products.
  • Particularly suitable for assessing new packaging materials and new types of food containers as well as testing their behavior during heat treatment.
  • Gives ability to design optimal processing guidelines for future products. Ideal for processing small production quantities predetermined for market tests.

AIRCO Spiral Freezer

Model #: KF13-230S
Item No: 17038-FZ

  • AIRCO 304 SS Spiral Freezer
  • Model: KF13-230S
  • Stainless Steel Omni Grid/Flex belt
  • Belt Width: 13" (Usable Belt Width: 11")
  • Clearance Height: 3-1/4"
  • Belt Height @ In-feed: 18" -- Location: Left
  • Out-feed Height: 8'
  • Usable Belt Length: 228'
  • Drum Dia. 57" --- 10 tiers.
  • Configuration: Straight Through --- Rotation: CW
  • Freezing Zone: 203'
  • CO2. to -120 ˚F --- CO2 system pressure: 300 psi
  • Electric: 460V, 30A --- PLC Controls
  • OAD: 11’ - 4” L x 8’ - 4” W x 10' H
  • Rated to approx. 1500 lbs per hour with a variable dwell time of 4 to 40 minutes.
  • Last running fire-roasted tomatoes

Jaygo Deaerator

Model #: JVD-48
Item No: 16984-MSC

  • Jaygo Deaerator
  • Model: JVD-48
  • Serial: 2654
  • 316 SS Contacts
  • 30 GPM
  • Year: 1998
  • Discharge Pump: Moyno FB2G-SSQ-SAA
  • Discharge motor: 5 HP, 1800 RPM
  • Vacuum Pump: Beach-Russ 1186-280C
  • Vacuum Motor: 15 HP, 1800 RPM
  • Overall Dimensions: 126" L x 82-3/4" W x 115"H (Closed) -- 162" H (Open)

Cornell 6" Food Pump w/ Key Stainless Steel Vortex

Model #: 6NHPP-F16K
Item No: 16981-PMP

  • Key Cornell 6" Food Pump w/ Key Stainless Steel Vortex
  • Model: 6NHPP-F16K
  • Serial: 155524 13.50
  • Vortex Dimensions: 43" L x 32" W x 21" Deep
  • 7.5 HP motor



Lyco Cooker Cooler

Model #: 8900
Item No: 16954-CK

  • Lyco Cooker Cooler
  • Model: 8900
  • Serial: RDBC O498-14421
  • 60" Dia. x 24' L
  • 16' Cook Length / 8' Cool Length
  • Stainless Steel Construction
  • Screen Size: 1/4"
  • Year: 1998

Reid 5 Basket Horizontal Retort

Item No: 16933-RT

  • Reid 5 Basket Horizontal Retort
  • 60" Dia. x 18' L
  • Single quick opening door.
  • MFG tagged and NAB coded for 30 PSI steam pressure.
  • Complete with ABB Commander 1900 digital controls with dual pen chart recorder, miscellaneous valves, fittings, and plumbing.
  • 23" basket track centers
  • Some pitting along the inside bottom
  • Year: 1964
  • Vertical slatted/Busse style baskets are available separately.

Stainless Steel Screw Elevator

Item No: 16873-MSC

  • 12" Dia. x 15' L
  • 24” In-feed height
  • 108” Discharge height
  • 13" W x 15" Deep Covered Screw Discharge
  • Chain driven
  • Stainless Steel base with casters
  • No drive

Sander Hansen (Krones) Pasteurizer

Model #: PB-31.4.504.22
Item No: 16855-MSC

  • Sander Hansen (Krones) Pasteurizer 84' L x16.5' H
  • Model: PB-31.4.504.22
  • Stainless Steel
  • Double Deck
  • All is in crates and secured from weather
  • Open tops for photo purposes only
  • The pasteurizer is complete, however disassembled and ready to load, in approximately 14 separate sections
  • The piping and pumps are included in lot
  • Includes APV Paraflow Heat Exchanger R5-MGS-16
  • Year: 2000
  • Serial number: 2000300300-84 and all control panels (3)
  • One of the mats is due for replacement -- but is included

Urschel G-A Dicer

Model #: G-A
Item No: 16816-UD

  • Urschel Dicer
  • Model: G-A
  • All Stainless Steel
  • Complete with magnetic disconnects
  • Set for 3/8" Dice (9.5 mm)




Shufflo Two Stage Speed-up Belt

Model #: SFF
Item No: 16807-MSC

  • Model: SFF
  • Serial: 4426-4
  • 90" L x 2-1/2" H
  • 1-1/2 HP 230/460V 3 PH Motor - 1740 RPM

Single Stage Speed-up Belt

Item No: 16804-MSC

  • Single Stage Speed-up Belt
  • 84" L x 5" H
  • 1HP 230/460V 3 PH Motor - 1745 RPM

GDC Shufflo Feeder Cutter

Item No: 16801-MSC

  • Grovedale Corp. Shuffalo Feeder Cutter
  • Approx. 48" W x 6" Steep

Holac HA-125 N Dicer

Model #: HA-125 N
Item No: 16756-UD

  • Model: HA-125 N
  • Serial Number: 121-65-03
  • Grid Size : 1" x 1"
  • HA 125 can process loose or pre-formed products
  • The HA can produce cubes, slices, flakes, or strips from meat, poultry and seafood
  • Output: up to 6,000 #/hr
  • Year: 1997
  • Stainless Steel Construction

Loma MET 30+ Metal Detector

Model #: MET 30+
Item No: 16699-MSC

  • Aperture: 7" H x 14" W
  • Model: MET 30+
  • Serial: 1820/2

Arpac Bundler/Wrapper with Tunnel

Model #: 105-28
Item No: 16678-PAK

  • Model:105-28
  • Self-contained bundler and shrink tunnel - OEM rated up to 30 TPM depending on application
  • Straight-thru operation 28" W seal bar  x 11" H seal bar opening x 27" maximum film width
  • Wrapped product enters a 14" H x 28" W tunnel opening via a 21" W silicone topped belt
  • Allen-Bradley SLC 150 Processor
  • Electrical: 460V - 3Ph - 60Hz
  • Footprint:  50" W x 180" L (add 39" to length for in-feed conveyor)

GEM Steam Belt Blancher

Item No: 16594-BL

  • GEM Steam Belt Blancher
  • Capacity 7,000
  • 36" Wide X 16' Long
  • 9' Product Infeed , 42" Product Discharge
  • 8' Steam Section top and bottom steam header and 8' Hot hold bottom steam header
  • Rotary Valves for infeed and discharge gives a even feed to the belt maintaining consistent product depth
  • Hood lifts for easy cleaning and service of product belt
  • Hydraulic Powered Valves
  • Steam Controls Included

I & H Engineered Systems Spray Tunnel

Model #: 5 X 40
Item No: 16546-MSC

  • Model 5 X 40
  • Approximate 5' W x 40' L plastic belt
  • Driven by a 2HP, 360/575 volt, 3460 rpm variable speed gear motor
  • End in-feed with adjustable height panel.
  • Internal spray bars
  • End feed with a 60" wide adjustable height air knife
  • New York Blower, size 1908a-A7-1/2, shop# E-4413-1115, driven by a 7.5hp motor
  • Includes (3) Burks centrifugal pumps, model TF350GA6-1-1-1/2-5.66SP
  • Each driven by a 5HP motor
  • (2) New York blowers, size 182, shop # E-4413-105, and a control panel
  • Mounted on a stainless steel frame with stainless steel side panels
  • Job# 2897E-2
  • Built 1989
  • Last used in a juice operation


Key Optyx Color Sorter

Model #: Key Optyx 602942-1
Item No: 16525-MSC

  • Key Technologies Optyx Color Sorters
  • M/N: Key Optyx 602942-1
  • S/N: 03-100347
  • No in-feed shaker

Urschel Dicer H

Model #: H
Item No: 16483-UD

  • Urschel Stainless Steel Dicer
  • Model: H
  • Currently Set 3/4" dice
  • Magnetic Disconnects
  • Stainless Steel Frame

Key Stainless Steel Tote Dump System

Model #: 426269-1
Item No: 16447-MSC

  • Hopper Size: 44" W X 54 " H
  • Pivot Point 9' H
  • Overall Height: 11' 6"
  • Year: 1998
  • No Hydraulic Power Pack

FMC Steritort Universal Laboratory Pressure Sterilizer 610-10

Model #: 610-10
Item No: 16423-RT

  • FMC Steritort Universal Laboratory Pressure Sterilizer
  • Model: 610-10 Universal
  • Serial: 3608-25-67
  • Job: 513
  • NB: 854
  • PSI: 45
  • Temp: 450˚ F
  • MFG: 854
  • Year: 1967


Belt Style Air Cleaner

Item No: 16285-MSC

  • 1 HP Blower
  • 1HP Drive on In-feed Belt
  • Belt Dimensions: 18" W X 30" L
Key 2X Air Cleaner

Item No: 16279-MSC

  • 18" W X 48" L
  • Mild Steel Construction and Frame

Urschel Green Bean Cutter

Model #: 30-C
Item No: 16273-CTR

  • Model: 30-C
  • S/N: 2752
Key 2X Air Cleaner

Item No: 16264-MSC

  • 24" W x 48" L
  • Stainless Steel In-Feed Shaker
  • Ajax Shaker with 5 HP Blower Motor
  • (Missing Upper Leaf Hopper)



Key 2X Air Cleaner

Item No: 16261-MSC

  • 24" W x 48" L
  • Stainless Steel In-feed Shaker
  • Ajax Shaker with 5 HP Blower Motor
  • (Missing Upper Leaf Hopper)



Vertiflo 6" Stainless Steel Hydro Food Pump

Model #: 1326
Item No: 16222-PMP

  • Size: 6" x 6" x 10"
  • Motor: 20 HP 230/460 V
  • Stainless Steel Frame

Vertiflo 6" Stainless Steel Hydro Food Pump

Model #: 1326
Item No: 16219-PMP

  • Size: 6" x 6" x 10"
  • Motor: 20 HP 230/460V
  • Stainless Steel Frame

Urschel GK-A Dicer

Model #: GK-A
Item No: 16135-UD

  • Urschel Dicer

  • Model: GK-A

  • Serial: 1249

  • Set: 1/2" Dice - Crinkle Cut

  • Stainless Steel Frame

Urschel M Dicer

Model #: M
Item No: 16048-UD

  • 304 Stainless steel
  • Dicing unit consists of
  • Feed roll
  • Circular knives, driven by 7-1/2 Hp. 3/60/230/460 Volt, 1160 rpm motor, w/ Stearns brake
  • Mounted on a stainless steel frame with casters
  • New in 2003

(NEW) All Stainless Steel Bin/Tote Dumper

Item No: 15997-MSC

  • Configured for bins up to 45" wide by 48" long up to 52 5/8" high. Bin/tote holder measuring 53-1/2 wide by 48" long by 42" deep.

  • Manually adjustable hold-down bar settable from 28.5" to 53-1/2" bin height clearance.

  • Heavy duty tubular stainless frame construction, with dump action provided by hydraulic cylinders powered by a self-contained hydraulic power pack with reservoir and manual controls.

  • Set for 208-230/460 volt 3 phase electrical input (unless otherwise specified). System rated to 3,500 lbs weight capacity. Comes set for FLOOR LEVEL INFEED, with a 38" pivot point, and 40" dump height. 

  • All NEW construction.


Cornell 6" Hydro Food Pump

Model #: 6NHT-2R
Item No: 15952-PMP

  • Model: 6NHT-2R

  • 6" Inlet & Outlet

  • Pump Only



FMC Two Shell Rotary Pressure Cooker/Cooler

Item No: 15811-CK

  • Can size: 211-400
  • 5376 cooker capacity
  • 5376 Cool Capacity
  • New in 1993 with the cooker having a new shell in 2011

Lyco UBR Mid-size Reel Un-snip Remover

Item No: 15676-NIP

  • 30” Dia. x 60" L
  • Stainless Steel Construction


Lyco Super Green Bean Snipper Reel

Model #: Super
Item No: 15610-MSC

  • 48" Dia. x 78" L
  • Lyco Super Green Bean Snipper Reel


Lyco Super Green Bean Snipper Reel

Model #: Super
Item No: 15604-MSC

  • 48" Dia. x 78" L
  • Lyco Super Green Bean Snipper Reel



Lyco Super Green Bean Snipper Reel

Model #: Super
Item No: 15601-MSC

  • 48" Dia. x 78" L
  • Lyco Super Green Bean Snipper Reel



Steriflow Retort System

Item No: 15196-TOR

    • Basket cooker complete with micro processing

 

Regal Pickle Spear Cutter

Item No: 14605-MSC

  • Regal Custom Design Pickle Spear Cutter
  • All Stainless Steel Construction
  • 1 HP 230-460 V
  • Automatically Slices Pickles Lengthwise Into Halves, Quarters, 5th and/or 6th Cut Depending on Desired Head
  • High-Speed Self-Adjusting Rubber Centering Rollers
  • Includes Banner Safety Package 

Pilot Lab Retort 2402

Model #: 2402
Item No: 14503-MSC

  • This multi-purpose system has a 24" Dia. chamber and is rated 45 psi/full vacuum @ 325º F
  • National board and code stamped
  • Stainless steel base
  • Unit has Honeywell TrueLine chart recorder, and numerous desirable features including agitation, heat exchanger, & pump

 

FMC Steritort Standard Laboratory Pressure Sterilizer 600-10

Model #: 600-10
Item No: 14362-MSC

    • Job: 439
    • National Board #: 807
    • PSI: 45
    • Temp: 450º F
    • Year: 1966

 

Edlund 625 Stainless Steel Crown Punch

Model #: 625
Item No: 14047-MSC

    • Set to 603 x 700
    • Requires 85 PSI (1-1/2 - 2 CFM)
    • Completed air operated
    • Constructed with stainless steel

 

Edlund 625 Stainless Steel Crown Punch

Model #: 625
Item No: 14044-MSC

    • Set to 603 x 700
    • Requires 85 PSI (1-1/2 - 2 CFM)
    • Completed air operated
    • Constructed with stainless steel

 

Edlund 625A Stainless Steel Industrial Can Opener

Model #: 625A
Item No: 14041-MSC

    • Set to 603 x 700
    • Requires 85 PSI (1-1/2 - 2 CFM)
    • Completed air operated
    • Equipped with PLC-driven alligator lid removal system

 

Hoffman Electrical Cabinet

Model #: 60” H x 25” W x 13”D
Item No: 13951-MSC

  • 60" H x 25" W x 13" Deep 
  • Constructed with stainless steel

Loma Metal Detector T-7

Model #: T-7
Item No: 13927-MSC

    • 18.5" W x 1.5" H Aperture
    • Overal DImensions: 6' L x 40" W
    • 12" belt retracts on reject
    • Constructed with stainless steel

 

Urschel Slicing Wheel OV

Model #: OV
Item No: 13840-MSC

    • 17-knife capacity
    • Crinkle cutting knives

 

Handtmann Linker/Stuffer Rack 220-16

Model #: 220-16
Item No: 13795-MSC


  • Constructed with stainless steel

Handtmann Linker/Stuffer Rack 220-16

Model #: 220-16
Item No: 13792-MSC


  • Constructed with stainless steel

Urschel TRS Slicing Wheel

Item No: 13732-MSC

    • 18-knife capacity
    • Constructed with stainless steel

 

Stainless Steel Transformer

Model #: 6'11" x 6' x 18"
Item No: 13729-MSC

  • 84" L x 72" W x 18" Deep
  • Constructed with stainless steel

 

Rexnord Industries Inc. LF2100-12

Model #: LF2100-12
Item No: 13726-MSC

  • Overall: 10' L x 12" W 

Hoffman Stainless Steel Control Panel

Model #: 4' x 3' x 1'
Item No: 13720-MSC

  • 48" H x 36" W x 13" Deep
  • Stainless steel industrial control panel enclosure

 

Urschel Dicer J

Model #: J
Item No: 13699-UD

    • 7 1/2 HP, 20.4/12.2 amp, 1730 RPM motor
    • Stainless steel contact parts
    • Constructed with stainless steel

 

Stainless Steel Accumulation Table

Item No: 13669-T

  • Stainless Steel Accumulation Table

Commercial Stainless Steel Air Cleaner

Item No: 13564-MSC

  • 36" W feed shaker w/ removable screen
  • 14" screen perforation
  • Equipped with 1 1/2 HP motor & Ajax shaker
  • 10 HP blower motor

 

Urschel Dicer H-X

Model #: H-X
Item No: 13492-ULI

    • 1-1/8" thickness maximum product in-feed
    • 1/2" crosscut spindle
    • Dice size set at 1"
    • Baldor 3PH, 3HP, 1725RPM, 60Hz, 230/460V, 8.6/4.3 amp motor
    • Constructed with stainless steel

 

Cornell Pump Co. 4" Food Pump 4NMPP-F5K

Model #: 4NMPP-F5K
Item No: 13468-PMP

    • 4" inlet and outlet
    • 24" W x  42" L x 18" deep stainless steel vortex
    • Equipped with 5 HP, 230 V, 60 Hz, 3Ph, 1740 RPM, 13.4/6.7 amp motor

 

Hollymatic 8/65 Patty Machine

Model #: Hollymatic 8/65
Item No: 13450-PRS

    • Hollymatic 8/65
    • Automatic Feed
    • 22 1/2" Hopper Infeed
    • Equipped with 2HP, 3 PH motor
    • Stainless Steel Construction

 

Urschel Dicer F

Model #: F
Item No: 13417-UD

    • Equipped with General Electric 2 HP, 3 Ph, 6.0/3.0 amp, 60Hz, 230/460V motor
    • Mild Steel Painted Frame

 

Cornell 10" Food Pump

Model #: 10NHPP-F12K PKG
Item No: 13357-PMP

  • Model: 10NHPP-F12K

  • Serial: 143342 21.00

  • Equipped with Baldor 3 Ph, 230/460 V, 96/48 amp, 40 HP, 60 Hz, 1765 RPM motor

FMC Continuous Rotary Sterilizer System

Item No: 13213-CK

    • 300 x 407 can size
    • Pre-heater with 924 can capacity
    • Pressure cooker with 3,192 can capacity
    • Atmospheric cooler with 2,604 can capacity shell

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13123-MSC

    • 17-knife capacity
    • Straight cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13111-MSC

    • 17-knife capacity
    • Straight cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13084-MSC

    • 17-knife capacity
    • Straight cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13051-MSC

    • 17-knife capacity
    • Crinkle cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13045-MSC

    • 17-knife capacity
    • Crinkle cutting knives

 

Urschel OV Slicing Wheel

Model #: OV SLICING WHEEL
Item No: 13039-MSC

    • 17-knife capacity
    • Crinkle cutting knives

 

Lyco Blancher Interior Reel

Item No: 13009-BL

  • Size: 48" W X 19' 6" L

  • Stainless Steel Shaft: 3" Diameter

  • Flight Spacing: 10"

  • Stainless Steel Spring Clamps

  • Stainless Steel Construction

  • No Perforated Screens


Urschel French Style Bean Cutter W

Model #: W
Item No: 12880-CTR

For 3-in. or longer blanched, round, or flat pod beans
Equipped with infeed shaker

Urschel French Style Bean Cutter W

Model #: W
Item No: 12874-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel French Style Bean Cutter W

Model #: W
Item No: 12871-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel French Style Bean Cutter W

Model #: W
Item No: 12868-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel Green Bean Cutter W

Model #: W
Item No: 12742-UD

    • Equipped with Allen feed shaker
    • Mild steel painted frame

 

GME Hydrocutter

Item No: 12664-MSC

    • Model #: Switcher
    • 8" Diameter Inlet & (2) 4" Diameter Outlets
    • New in 1995

 

Diamond Stainless Steel Pork Depositor D-105-RD

Model #: D-105-RD
Item No: 12544-MSC

    • Set to 603 can diameter
    • Equipped with Eurodrives on cutter and can feed
    • Central lube system

 

Arpac Bundler & Tunnel 105-28

Model #: 105-28
Item No: 12343-PAK

    • Model: 105-28
    • Seal Bar Opening: 9 3/4" Fully Extended
    • Includes Allen-Bradley Model: SLC 5/01 CPU

 

Hobart Cutter/Mixer VCM25

Model #: VCM25
Item No: 11728-CTR


  • Equipped with 208V motor

Muller Automatic Pallet Wrapper EGA

Model #: EGA
Item No: 11707-PAK

    • Model #: EGA
    • Includes In-feed Conveyor, Pallet Spinner, Shuttle Conveyor, Scissor Lift & Conveyor
    • Equipped with 240 V, 3 PH, 60 Hz motor
    • Overall Length: 27' L x 54" W Conveyor

 

Custom Designed & Manufactured Feeder Bin

Item No: 11695-MSC

  • 32" Dia. x 8' L
  • Constructed with stainless steel

 

Liquid Carbonic CO2 Flighted Belt Freezer JE-U3-A

Model #: JE-U3-A
Item No: 11518-FZ

  • Two sections - 36" W belt
  • 5 flights
  • Tight mesh belt
  • Stainless steel construction

 

Kronen Spinner

Model #: 8600
Item No: 10957-SPN

    • Model: K-50-100 S
    • New: 2004
    • Equipped with 230 V, Single Phase, 50/60 Hz motor

 

FMC Tomato Chopper

Item No: 10444-MSC

  • FMC Tomato Chopper

  • No Motor or Pump


I&H Spray Cooler

Item No: 10225-MSC

    • 8' W x 50' L single deck
    • Intralox plastic mat belt
    • Overhead water sprays with in-feed and discharge bottle conveyors
    • Air blower at discharge end with 4 water re-circulation pumps

 

Wolverine Jet Zone Fluid Bed Dryer

Item No: 10222-DR

    • 2,000 lb. capacity per hour
    • 5' W x 20' L
    • 2 zones w/ gas valves and separate cooling conveyor
    • Controls and bag house mounted outside building

 

Baxter Double Rack Oven 0V200G-M2

Model #: 0V200G-M2
Item No: 09676-OVN

    • Model: 0V200G-M2
    • Gas Fired 340,000 BTU
    • New in 1989

 

Holac Dicer VA-120N

Model #: VA-120N
Item No: 08263-UD

  • 1/2" x 1/2" grid size
  • Hopper Dimensions: 4-1/2" W x 4-1/2" H x 28" L
  • Constructed with stainless steel

 

Koach Liquid Nitrogen Immersion Freezer CIF-350-940

Model #: CIF-350-940
Item No: 07498-FZ

  • 48" W x 12' long
  • 4000 to 6000-lb. capacity per hour
  • Equipped with 15 HP motor
  • Clean out conveyor

 

Markets Served
Need help?

Not finding what you're looking for?

Have a question?

We'd love to hear from you!

Contact Us

or call 1-234-206-2882

Weekly Inventory Updates
Subscribe to our Newsletter
Latest Blog Post