Used Food Processing Cutters

Food processing cutters use different blades to cut up, chop, dice, slice, or shred large batch of food product into smaller pieces. Desired food cutting machines offer clean and precise cuts, minimized downtime due to product sticking on blades and size changes, as well as improved product presentation.

These cutters are used in many types of food processing facilities for meat, poultry, vegetables and fruits, fish & seafood, cheese, bread, potatoes, and other fresh-cut applications.

Regal Equipment offers used and reconditioned food processing cutters from various manufacturers including Urschel, Hobart, Holac, Carruthers and FPEC. To learn more about a specific food processing cutter, click on the product name below. 

All Cutters - 29 Items

HUGHES Fresh Corn Cutter

Model #: 037-5135
Item No: 18712-CTR

Hughes fresh market corn cutter removes the corn kernels from husked corn for commercial use as fresh or frozen product.  This is a hand feed cutter capable of handling 100 ears of husked sweet corn per hour depending on operator capabilities.  The husked cobs cobs are placed on a conveyor the kernels are removed by 6 rotating blades that precisely cut the kernels from the cob.  The kernels fall through an opening in the bottom of the cutting chamber and the cobs are ejected out the side into a tote.  

  • Capacity approximately 100 husked ears per minute depending on operator

  • Dimensions 62" long X 44" wide X 55" Heigh

  • Utility Requirements 230 Volt Single Phase, 1-2 gal. water per minute

  • Stainless steel construction except for cutting head and drive assembly 

  • E- Stop Equipped

  • Simple operator controls 

  • On casters 

Stephan Microcut MCH

Model #: MCH20K
Item No: 18682-M

  • The STEPHAN Microcut Machines are compact and easy to use. The unique Microcut principle allows fine cutting and emulsifying processes in one machine.

  •  They handle almost all the tasks involved in the production of meat emulsions for sausage production, fine pate, puree and similar fine and smooth products in the meat and convenience industry.

  • Vol 440 60HZ

  • MFG: 2012 

Urschel Comitrol 2100

Model #: 2100
Item No: 18568-M

  • impeller Moter 40 Hp

  • Feed screw 5 Hp

  • Agitator 2 Hp

  • Stainless Steel Construction 

Stephan Microcut MCH

Model #: MCH20K
Item No: 18502-M

  • The STEPHAN Microcut Machines are compact and easy to use. The unique Microcut principle allows fine cutting and emulsifying processes in one machine.

  •  They handle almost all the tasks involved in the production of meat emulsions for sausage production, fine pate, puree and similar fine and smooth products in the meat and convenience industry.

  • 120 liter hopper

  • 1200 Kg/Hr. capacity (Depending on Product)

  • 3600 Rpm @ 60Hz

  • Motor 160-M-2A, 15 KW, 60 HZ, A 48,5, 

  • MASSCH. NR. 722.381.01

  • 220V, 230V 3 Phase 

Urschel Slicer OV

Model #: OV
Item No: 18223-ULI

  • 1/4" Cut head

  • Mild Steel Painted Frame

Urschel Dicer J9-A

Model #: J9-A
Item No: 18220-UD

  • Set: 3/8"

  • Stainless Steel Construction

Urschel G-A Dicer

Model #: G-A
Item No: 18205-UD

  • 2 HP motor, 230/460

  • Stainless Steel Frame

A.K. Robins Pickle Spear Cutter

Model #: 82
Item No: 18151-MSC

  • Stainless steel frame

  • Roam rollers and fixed cutting head

  •  Adjustable legs

  • 208 - 230 / 460 Volts, 3.2 -3 / 1.5 Amps, 1 HP motor  

Urschel CC-D Slicer

Model #: CC-D
Item No: 18145-ULI

  • 1/4" shred assembly

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

Urschel CC-D Slicer

Model #: CC-D
Item No: 18142-ULI

  • 1/4" shed assembly

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

Urschel CC-D Slicer

Model #: CC-D
Item No: 18109-ULI

  • New 2001

  • 1/4" shred assembly included 

  • 10 HP motor 460 Volt, 3 phase

  • Stainless steel construction

  • Includes merchant Scmidt stainless steel stand on casters

Urschel CC-D Slicer

Model #: CC-D
Item No: 18106-ULI

  • 1/4" shred head assembly included

  • 10 HP motor 460 Volt 3 phase

  • Stainless steel construction

  • Includes Merchant Schmidt stainless steel stand on casters

Hughes Cob Saw

Model #: B193SURIH
Item No: 17926-MSC

  • Designed for cutting off the tips and tails or cutting various sized cobbettes

  • Can be used for processing husked or unhusked corn

  • Capable of cutting other products such as carrots, celery, peppers and zucchini

  • Heavy duty stainless steel frame

  • Unit is 16'L x 5'W

CCM Corn Cutter

Model #: SC8402-L
Item No: 17818-MSC

  • Designed to gently and automatically orient and feed cobs to an aperture-like cutting head which automatically adjusts to the size and taper of the cob as it cuts.

  • Feed system is designed to automatically remove cobs which are too small, and to attempt to clear cutting head jams without operator intervention.

  • Manufacturer rates for 110 to 130 ears per minute (average rate).

  • Food grade sanitary stainless steel construction

  • Hydraulically powered, with an  approximately 10 gpm hydraulic requirement.

  • Uses water to keep the at a rate of  7 approximately 7 gallons per hour, to lubricate the cutting head.

  • 16" wide x 20" long infeed belt leading to a 27" diameter sorting bowl for orientation (the "L" in the model number designates "Large bowl".

  • 40" long cob feed belt with reject. Separate 24" diameter sorting bowl. 6' high infeed and 32" high kernel discharge, 42" high cob discharge.

  • Hydraulic power pack (pump and reservoir system) required / not included

Rotary Cabbage Coring Machine (NEW)

Item No: 17527-MSC

  • Rotary Cabbage Coring Machine (NEW)

  • 4-Station Continuous Cabbage Corer

  • Manufacturer rated for up to 28 heads per minute

  • Manual head placement on a revolving table

  • Stainless steel product contacts, support frame, & screen shrouds

  • Knives available to cut but leave the core (e.g. for sauerkraut), or to remove the core (e.g. for fresh-cut cole-slaw)

  • 1.5 HP 208/230/460 volt 3-phase motor

Urschel VSC Segment Cutter

Model #: VSC
Item No: 17368-ULI

  • Urschel VSC Segment Cutter

  • Urschel Velocicut 4" Dia. 8-segment Wedge Cut Head

  • Factory stainless steel electrical control panel with safety interlock system

  • Aftermarket VFD within a PVC control box

  • 5 HP, 3 phase motor


Rotary Cabbage Coring Machine

Item No: 17272-MSC

  • Rotary Cabbage Coring Machine
  • 4-Station Continuous Cabbage Corer
  • Manufacturer rated for up to 28 heads per minute
  • Manual head placement on a revolving table
  • Stainless steel product contacts, support frame and screen shrouds 
  • Knives available to cut but leave the core (e.g. for sauerkraut), or to remove the core (e.g. for fresh-cut cole-slaw)
  • 1.5 HP 208/230/460 volt 3-phase motor 

Dofra Bell Pepper Coring Machine

Model #: PD6000 20044631
Item No: 17164-MSC

  • Dofra Bell Pepper Coring Machine
  • Model: PD6000 20044631
  • Year: 2013
  • 1985 lb. capacity

Dofra Bell Pepper Coring Machine

Model #: PD6000 20044631
Item No: 17161-MSC

  • Dofra Bell Pepper Coring Machine
  • Model: PD6000 20044631
  • Year: 2013
  • 1985 lb. capacity

GDC Shufflo Feeder Cutter

Item No: 16801-MSC

  • Grovedale Corp. Shuffalo Feeder Cutter
  • Approx. 48" W x 6" Steep

Urschel Green Bean Cutter

Model #: 30-C
Item No: 16273-CTR

  • Model: 30-C
  • S/N: 2752
Regal Pickle Spear Cutter

Item No: 14605-MSC

  • Regal Custom Design Pickle Spear Cutter
  • All Stainless Steel Construction
  • 1 HP 230-460 V
  • Automatically Slices Pickles Lengthwise Into Halves, Quarters, 5th and/or 6th Cut Depending on Desired Head
  • High-Speed Self-Adjusting Rubber Centering Rollers
  • Includes Banner Safety Package 

Urschel French Style Bean Cutter W

Model #: W
Item No: 12880-CTR

For 3-in. or longer blanched, round, or flat pod beans
Equipped with infeed shaker

Urschel French Style Bean Cutter W

Model #: W
Item No: 12874-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel French Style Bean Cutter W

Model #: W
Item No: 12871-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel French Style Bean Cutter W

Model #: W
Item No: 12868-CTR

    • For 3-in. or longer blanched, round, or flat pod beans
    • Contains stainless steel, manganese, aluminum bronze, and aluminum product contact parts

 

Urschel Green Bean Cutter W

Model #: W
Item No: 12742-UD

    • Equipped with Allen feed shaker
    • Mild steel painted frame

 

GME Hydrocutter

Item No: 12664-MSC

    • Model #: Switcher
    • 8" Diameter Inlet & (2) 4" Diameter Outlets
    • New in 1995

 

Hobart Cutter/Mixer VCM25

Model #: VCM25
Item No: 11728-CTR


  • Equipped with 208V motor

Markets Served
Weekly Inventory Updates
Subscribe to our Newsletter
Latest Blog Post