Used Food Processing Corn Cutters

Industrial corn cutters process corn kernels by cutting, shredding, and scraping them off the cob. These systems precisely cut the kernels from cobs for fresh or fresh-frozen products as well as prepare corn grains for canning or deep freezing right after harvest.

Units may come with a corn-orienter that properly aligns corn moving forward, preparing them for kernel cutting and section cutting. Various processing facilities for fruits and vegetables use these corn cutters for other applications.

Regal Equipment offers used and reconditioned corn cutters from trusted manufacturers including FMC and A&K Development. Efficiently de-kernel numerous corn cobs in a minute. To learn more about a specific food processing corn cutter, click on the product name below. 

All Corn Cutters - 9 Items

HUGHES Fresh Corn Cutter

Model #: 037-5135
Item No: 18712-CTR

Hughes fresh market corn cutter removes the corn kernels from husked corn for commercial use as fresh or frozen product.  This is a hand feed cutter capable of handling 100 ears of husked sweet corn per hour depending on operator capabilities.  The husked cobs cobs are placed on a conveyor the kernels are removed by 6 rotating blades that precisely cut the kernels from the cob.  The kernels fall through an opening in the bottom of the cutting chamber and the cobs are ejected out the side into a tote.  

  • Capacity approximately 100 husked ears per minute depending on operator

  • Dimensions 62" long X 44" wide X 55" Heigh

  • Utility Requirements 230 Volt Single Phase, 1-2 gal. water per minute

  • Stainless steel construction except for cutting head and drive assembly 

  • E- Stop Equipped

  • Simple operator controls 

  • On casters 

HUGHES Fresh Mini Husker

Model #: 032-8305
Item No: 18709-MSC

Fresh Market Corn Husker designed to efficiently remove the husk from fresh sweet corn with shanks removed.  Capable of husking 20-30 ears per minute dependent on operator feed rate. Specifically suited for the smaller operator processing fresh market produce or frozen.  The machine requires only one operator to feed and control the equipment.  The husker is capable of also removing stems and debris from fruit, vines such as citrus fruits and apples.  They have also been used to remove stems and debris from beets, carrots, onions, potatoes, and radishes.

  • Capacity 20-30 ears per minute

  • Dimensions 32" wide X 102" long X 57" Heigh

  • Utility Requirements: 230 volt single phase, 1-2 gal. water per minute, 15 Cfm @90 Psi compressed air

  • Safety switches for operator protection, Lexan top cover allows operator view of process 

  • Stainless steel construction of all components except roller shafts and dive assemblies

  • Adjustable hand cranks allow for height adjustment

  • wEquipped with lockable swivel casters 

Hughes Fresh Market Corn Cob Cutting Line

Item No: 18226-MSC

  • Fresh curt cob line capacity estimated @ 2-3 tons per hour depending on feed rate and quality of product

  • Line consisting of the following equipment 

  • Hughes product conveyor 20' L x 18" W, stainless steel construction

  • Hughes cob feed shaker orienter to fresh market husker 10' L X 20" W

  • Hughes Husker Fresh Market 2 Lane

  • Hughes fresh market cob saw 

  • Includes platforms and controls 

Hughes Cob Saw

Model #: B193SURIH
Item No: 17926-MSC

  • Designed for cutting off the tips and tails or cutting various sized cobbettes

  • Can be used for processing husked or unhusked corn

  • Capable of cutting other products such as carrots, celery, peppers and zucchini

  • Heavy duty stainless steel frame

  • Unit is 16'L x 5'W

CCM Corn Cutter

Model #: SC8402-L
Item No: 17818-MSC

  • Designed to gently and automatically orient and feed cobs to an aperture-like cutting head which automatically adjusts to the size and taper of the cob as it cuts.

  • Feed system is designed to automatically remove cobs which are too small, and to attempt to clear cutting head jams without operator intervention.

  • Manufacturer rates for 110 to 130 ears per minute (average rate).

  • Food grade sanitary stainless steel construction

  • Hydraulically powered, with an  approximately 10 gpm hydraulic requirement.

  • Uses water to keep the at a rate of  7 approximately 7 gallons per hour, to lubricate the cutting head.

  • 16" wide x 20" long infeed belt leading to a 27" diameter sorting bowl for orientation (the "L" in the model number designates "Large bowl".

  • 40" long cob feed belt with reject. Separate 24" diameter sorting bowl. 6' high infeed and 32" high kernel discharge, 42" high cob discharge.

  • Hydraulic power pack (pump and reservoir system) required / not included

A&K Development Corn Orienter with 3-AR Corn Cutter

Model #: 3-AR
Item No: 15577-CTR

  • Each unit automatically singulates, aligns, and orients corn, feeding it into an A&K Power Corn Cutter.

  • The system is equipped with a metering conveyor belt, a flighted feeder, a double orienting head, and a two-speed cutter feed chain.

  • Hydraulic drive motors power the automatic cutter feeder and corn cutter by self-contained hydraulic power pack with a 2 hp motor.

  • Stainless Steel Construction

A&K Development Corn Orienter with 3-AR Corn Cutter

Model #: 3-AR
Item No: 15346-CTR

  • Each unit automatically singulates, aligns, and orients corn, feeding it into an A&K Power Corn Cutter.
  • The system is equipped with a metering conveyor belt, a flighted feeder, a double orienting head, and a two-speed cutter feed chain.
  • Hydraulic drive motors power the automatic cutter feeder and corn cutter by self-contained hydraulic power pack with a 2 hp motor.
  • Stainless Steel Construction

Corn Cutter SC-120

Model #: SC120
Item No: 14569-CTR

    • FMC SC-120 Corn Cutter Equipped with Manuel Feed
    • Stainless Steel Housing

 

FMC Corn Cutter 3-AR

Model #: 3-AR
Item No: 00248-CTR

    • Equipped with quick adjust
    • One head
    • Stainless steel pedestal

 

Markets Served
Weekly Inventory Updates
Subscribe to our Newsletter
Latest Blog Post