COVID-19 RESPONSE: Regal Equipment remains open and has put additional sanitation protocols in place to ensure the highest quality of service to our customers. We have put in place measures to protect our employees and their families and are following all Health Department and CDC recommendations. We are answering all calls and requests. Please let us know how we can help.

Used BCast Food Processing Equipment

All BCast Equipment - 1 Item

BCast 200 Gallon Kettle

Item No: 22132-KT

BCast 200 Gallon 365 Gallon Capacity) Jacketed

Cook and Cool Tank in accordance with the

following specifications:

INNER SHELL:4mm, T-316 stainless steel

INNER BOTTOM:4 mm, T-316 s/s, conical

with 120° included angle

TOP COVERS: 3mm gauge, T-316 s/s, two-piece

hinged covers with handles and latch, mounted

from the center bridge

INSULATION: Full sidewall and bottom head will

be insulated with chloride free mineral fiber

insulation.

OUTER SHELL: 3 mm gauge, T-304 s/s

OUTER BOTTOM: 3 mm gauge, T-304 s/s, Conical

with 120° included angle

SUPPORTS: (4) 4” pipe legs with adjustable ball

feet, T-304 s/s. Leg will mount to inner cone bottom

and extend through outer bottom skin.

OUTLET: Flange for flush mount valve 3" , 21"to

floor. less valve height Valve will be supplied by

Bcast.

THERMOWELL: (1) Pyromation tank adapter

flush mount

DIMENSIONS: 72” ID x 74” OD x 16” straight

sidewall height x 84” approx. overall height

HEAT TRANSFER SURFACE: The full bottom

head will be supplied with 2 mm gauge, T-304 s/s

dimpled heat transfer surface with (1) 2” inlet and

(1) 2” outlet threaded pipe nipple connection and

supplied with directional baffling. Connections

-code stamped heat transfer jacket for use at 75 PSI.

BRIDGE: T-316L s/s center bridge for supporting

of agitator

BAFFLE: (1) internal adjustable baffle, T-316L s/s.

AGITATOR: Top entry dual motion

counter-rotating agitator with bottom scrape driven

by 5 HP right angle helical bevel gear motor

operating at 23 RPM. Motor will be 230-460/3/60

washdown (less starter) inverter duty. Scraper

blades will be included.

Counter-rotating tri blade impellers 3 hp. gear motor

operating at 90 RPM. Motor will be 230-460/3/60

washdown (less starter) inverter rated. Shaft will be

equipped with removable tri blade impeller

assembly.

Quick change scraper blade sleeve included.

Shaft will be through a neoprene slinger and the

lower shaft will be supported by a bottom steady

bearing with 6/6 nylon inserts and Viton elastomer.

TANK RATING: Tank is designed for 75 psi @

325° F. Heat Transfer Surface is designed, tested,

fabricated 75 PSI rating.

Heat transfer surface will include ASME registration

U1 Cert and national board listing..

MATERIAL FINISH: All interior surfaces will be

polished to a #4 150-grit sanitary finish. #4 exterior

WELD FINISH: All interior and exterior welds will

be ground smooth and ribbon polished

OPERATING HEIGHT TO RIM SHOULD BE 64".

stainless package includes c-face adaptors to mount

Stainless steel washdown duty motors, and stainless

steel gear box to bridge mounting flange.

Latch handle release and long handle lid lift rods.

RIG cross bar to run opposite of Bridge direction.

Exterior Shell to have Screened leak detect port in

the low point of cone. 

Cooker cooler Hi temp blade (275 F.) adder

Markets Served
Need help?

Not finding what you're looking for?

Have a question?

We'd love to hear from you!

Contact Us

or call 1-234-206-2882

Weekly Inventory Updates
Subscribe to our Newsletter
Latest Blog Post